Design and Modeling of Micromechanical GaAs based Hot Plate for Gas Sensors

For modern Gas sensors, high sensitivity and low power are expected. This paper discusses design, simulation and fabrication of new Micromachined Thermal Converters (MTCs) based on GaAs developed for Gas sensors. Metal oxide gas sensors generally work in high temperature mode that is required for chemical reactions to be performed between molecules of the specified gas and the surface of sensing material. There is a low power consumption required to obtain the operation temperatures in the range of 200 to 500 oC. High thermal isolation of these devices solves consumption problem and can be made by designing of free standing micromechanical hot plates. Mechanical stability and a fast thermal response are especially significant parameters that can not be neglected. These characteristics can be achieved with new concept of GaAs thermal converter.Comment: Submitted on behalf of EDA Publishing Association (http://irevues.inist.fr/EDA-Publishing

Calculation of clearances in twin screw compressors

Clearances between rotating and stationary parts in a screw compressor are set to ensure the efficient operation and allow for thermal deformation without unwanted contacts. The change in clearances is caused by both pressure and temperature changes within the machine. If clearances are too large, the increased leakage flows will reduce efficiency. However, if the nominal clearances are too small, contacts between the rotating and stationary parts can occur as a consequence of rotor and casing deformations. In order to determine the operational clearances, a numerical analysis of deformation of screw compressor rotors and casing has to be performed. This paper discusses how the temperature of rotor and casing surfaces calculated from the one-dimensional chamber model in the SCORG could be used as a boundary conditions for a steady state thermal and structural analysis of a screw compressor solid parts. Deformations of rotors and casing under temperature load were calculated using a commercial Finite Element Analysis code ANSYS. Operational clearance are estimated from these deformations and some recommendations for further work are proposed

Restructuring the Homicide Offences to Tackle Violence, Discrimination and Drugs in a Modern Society

This article argues that the current law on homicide fails to satisfy the goal of “fair labelling” leading to an indirect risk of discrimination against vulnerable members of our society who are not being consistently recognized as the victims of a fatal crime. The case is put forward for two new rungs in the homicide ladder of “aggravated murder” and “aggravated manslaughter”, along with statutory offences which directly cater for the victims of drug homicides and domestic abuse leading to a suicide

Tailoring surface properties, biocompatibility and corrosion behavior of stainless steel by laser induced periodic surface treatment towards developing biomimetic stents

Laser-Induced Periodic Surface Structures (LIPSS) holds great potential for regenerative biomedicine. Creating highly precise LIPSS enables to generate biomimetic implant surfaces with improved properties. The present study focuses on the fabrication and investigation of laser-treated stainless steel samples with applied linear LIPSS patterns with grooves made by means of a picosecond laser system using wavelengths of 1064 nm and 532 nm. To investigate properties of the laser-treated surfaces and to understand the basics of cell-surface interactions between the LIPSS and human Umbilical Cord Mesenchymal Stem Cells (UCMSC), flat stainless steel samples with various applied nanopatterns were used. Such LIPSSs demonstrated higher surface roughness, good biocompatibility, lower wettability and higher corrosion resistance compared to the untreated (polished) spec-imens. The surface roughness of laser-treated samples was in microscale that enabled adhesion and migration of endothelial cells, thus increasing the likelihood for endothelialisation. This thereby could reduce the chances for the development of Late Stent Thrombosis (LST) and In-Stent Restenosis (ISR). Furthermore, laser textured surfaces demonstrated an environment supportive for cell attachment, proliferation and alignment with the nanogroves. Therefore, application of the biomimetic nanopatterns could help to overcome frequent post-surgery complications after the stent implantation

Saving lives in road traffic—ethical aspects

Aim: This article aims at giving an overview of five ethical problem areas relating to traffic safety, thereby providing a general framework for analysing traffic safety from an ethical perspective and encouraging further discussion concerning problems, policies and technology in this area. Subjects and methods: The problems presented in the article are criminalisation, paternalism, privacy, justice and responsibility, and the reasons for choosing these are the following. First, they are all important areas in moral philosophy. Second, they are fairly general and it should be possible to categorise more specific problems under these headings. Ethical aspects of road traffic have not received the philosophical attention they deserve. Every year, more than 1 million people die globally in traffic accidents, and 20 to 50 million people are injured. Ninety per cent of the road traffic fatalities occur in low- and middle-income countries, where it is a growing problem. Politics, economics, culture and technology affect the number of fatalities and injuries, and the measures used to combat deaths in traffic as well as the role of road traffic should be ethically scrutinised. The topics are analysed and discussed from a moral-philosophical perspective, and the discussion includes both theory and applications. Results and conclusion: The author concludes with some thoughts on how the ethical discussion can be included in the public debate on how to save lives in road traffic. People in industrialised societies are so used to road traffic that it is almost seen as part of nature. Consequently, we do not acknowledge that we can introduce change and that we can affect the role we have given road traffic and cars. By acknowledging the ethical aspects of road traffic and illuminating the way the choices society makes are ethically charged, it becomes clear that there are alternative ways to design the road traffic system. The most important general conclusion is that discussion concerning these alternative ways of designing the system should be encouraged

Explaining Extreme Events of 2012 from a Climate Perspective

Attribution of extreme events is a challenging science and one that is currently undergoing considerable evolution. In this paper are 19 analyses by 18 different research groups, often using quite different methodologies, of 12 extreme events that occurred in 2012. In addition to investigating the causes of these extreme events, the multiple analyses of four of the events, the high temperatures in the United States, the record low levels of Arctic sea ice, and the heavy rain in northern Europe and eastern Australia, provide an opportunity to compare and contrast the strengths and weaknesses of the various methodologies. The differences also provide insights into the structural uncertainty of event attribution, that is, the uncertainty that arises directly from the differences in analysis methodology. In these cases, there was considerable agreement between the different assessments of the same event. However, different events had very different causes. Approximately half the analyses found some evidence that anthropogenically caused climate change was a contributing factor to the extreme event examined, though the effects of natural fluctuations of weather and climate on the evolution of many of the extreme events played key roles as well.Peer Reviewe

The extreme European summer 2012

The European summer of 2012 was marked by strongly contrasting rainfall anomalies, which led to flooding in northern Europe and droughts and wildfires in southern Europe. This season was not an isolated event, rather the latest in a string of summers characterized by a southward shifted Atlantic storm track as described by the negative phase of the SNAO. The degree of decadal variability in these features suggests a role for forcing from outside the dynamical atmosphere, and preliminary numerical experiments suggest that the global SST and low Arctic sea ice extent anomalies are likely to have played a role and that warm North Atlantic SSTs were a particular contributing factor. The direct effects of changes in radiative forcing from greenhouse gas and aerosol forcing are not included in these experiments, but both anthropogenic forcing and natural variability may have influenced the SST and sea ice changes