652 research outputs found

    Preservation Methods Differ in Fecal Microbiome Stability, Affecting Suitability for Field Studies.

    Get PDF
    Immediate freezing at -20°C or below has been considered the gold standard for microbiome preservation, yet this approach is not feasible for many field studies, ranging from anthropology to wildlife conservation. Here we tested five methods for preserving human and dog fecal specimens for periods of up to 8 weeks, including such types of variation as freeze-thaw cycles and the high temperature fluctuations often encountered under field conditions. We found that three of the methods-95% ethanol, FTA cards, and the OMNIgene Gut kit-can preserve samples sufficiently well at ambient temperatures such that differences at 8 weeks are comparable to differences among technical replicates. However, even the worst methods, including those with no fixative, were able to reveal microbiome differences between species at 8 weeks and between individuals after a week, allowing meta-analyses of samples collected using various methods when the effect of interest is expected to be larger than interindividual variation (although use of a single method within a study is strongly recommended to reduce batch effects). Encouragingly for FTA cards, the differences caused by this method are systematic and can be detrended. As in other studies, we strongly caution against the use of 70% ethanol. The results, spanning 15 individuals and over 1,200 samples, provide our most comprehensive view to date of storage effects on stool and provide a paradigm for the future studies of other sample types that will be required to provide a global view of microbial diversity and its interaction among humans, animals, and the environment. IMPORTANCE Our study, spanning 15 individuals and over 1,200 samples, provides our most comprehensive view to date of storage and stabilization effects on stool. We tested five methods for preserving human and dog fecal specimens for periods of up to 8 weeks, including the types of variation often encountered under field conditions, such as freeze-thaw cycles and high temperature fluctuations. We show that several cost-effective methods provide excellent microbiome stability out to 8 weeks, opening up a range of field studies with humans and wildlife that would otherwise be cost-prohibitive

    The Oral and Skin Microbiomes of Captive Komodo Dragons Are Significantly Shared with Their Habitat.

    Get PDF
    Examining the way in which animals, including those in captivity, interact with their environment is extremely important for studying ecological processes and developing sophisticated animal husbandry. Here we use the Komodo dragon (Varanus komodoensis) to quantify the degree of sharing of salivary, skin, and fecal microbiota with their environment in captivity. Both species richness and microbial community composition of most surfaces in the Komodo dragon's environment are similar to the Komodo dragon's salivary and skin microbiota but less similar to the stool-associated microbiota. We additionally compared host-environment microbiome sharing between captive Komodo dragons and their enclosures, humans and pets and their homes, and wild amphibians and their environments. We observed similar host-environment microbiome sharing patterns among humans and their pets and Komodo dragons, with high levels of human/pet- and Komodo dragon-associated microbes on home and enclosure surfaces. In contrast, only small amounts of amphibian-associated microbes were detected in the animals' environments. We suggest that the degree of sharing between the Komodo dragon microbiota and its enclosure surfaces has important implications for animal health. These animals evolved in the context of constant exposure to a complex environmental microbiota, which likely shaped their physiological development; in captivity, these animals will not receive significant exposure to microbes not already in their enclosure, with unknown consequences for their health. IMPORTANCE Animals, including humans, have evolved in the context of exposure to a variety of microbial organisms present in the environment. Only recently have humans, and some animals, begun to spend a significant amount of time in enclosed artificial environments, rather than in the more natural spaces in which most of evolution took place. The consequences of this radical change in lifestyle likely extend to the microbes residing in and on our bodies and may have important implications for health and disease. A full characterization of host-microbe sharing in both closed and open environments will provide crucial information that may enable the improvement of health in humans and in captive animals, both of which experience a greater incidence of disease (including chronic illness) than counterparts living under more ecologically natural conditions

    Poly(3-hydroxyoctanoate), a promising new material for cardiac tissue engineering

    Get PDF
    Cardiac tissue engineering (CTE) is currently a prime focus of research due to an enormous clinical need. In this work, a novel functional material, Poly(3-hydroxyoctanoate), P(3HO), a medium chain length polyhydroxyalkanoate (PHA), produced using bacterial fermentation, was studied as a new potential material for CTE. Engineered constructs with improved mechanical properties, crucial for supporting the organ during new tissue regeneration, and enhanced surface topography, to allow efficient cell adhesion and proliferation, were fabricated. Our results showed that the mechanical properties of the final patches were close to that of cardiac muscle. Biocompatibility of the P(3HO) neat patches, assessed using Neonatal ventricular rat myocytes (NVRM), showed that the polymer was as good as collagen in terms of cell viability, proliferation and adhesion. Enhanced cell adhesion and proliferation properties were observed when porous and fibrous structures were incorporated to the patches. Also, no deleterious effect was observed on the adults cardiomyocytes' contraction when cardiomyocytes were seeded on the P(3HO) patches. Hence, P(3HO) based multifunctional cardiac patches are promising constructs for efficient CTE. This work will provide a positive impact on the development of P(3HO) and other PHAs as a novel new family of biodegradable functional materials with huge potential in a range of different biomedical applications, particularly CTE, leading to further interest and exploitation of these materials

    Auxetic cardiac patches with tunable mechanical and conductive properties toward treating myocardial infarction

    Get PDF
    An auxetic conductive cardiac patch (AuxCP) for the treatment of myocardial infarction (MI) is introduced. The auxetic design gives the patch a negative Poisson's ratio, providing it with the ability to conform to the demanding mechanics of the heart. The conductivity allows the patch to interface with electroresponsive tissues such as the heart. Excimer laser microablation is used to micropattern a re-entrant honeycomb (bow-tie) design into a chitosan-polyaniline composite. It is shown that the bow-tie design can produce patches with a wide range in mechanical strength and anisotropy, which can be tuned to match native heart tissue. Further, the auxetic patches are conductive and cytocompatible with murine neonatal cardiomyocytes in vitro. Ex vivo studies demonstrate that the auxetic patches have no detrimental effect on the electrophysiology of both healthy and MI rat hearts and conform better to native heart movements than unpatterned patches of the same material. Finally, the AuxCP applied in a rat MI model results in no detrimental effect on cardiac function and negligible fibrotic response after two weeks in vivo. This approach represents a versatile and robust platform for cardiac biomaterial design and could therefore lead to a promising treatment for MI

    Using the gut microbiota as a novel tool for examining colobine primate GI health

    Get PDF
    Primates of the Colobinae subfamily are highly folivorous. They possess a sacculated foregut and are believed to rely on a specialized gut microbiota to extract sufficient energy from their hard-to-digest diet. Although many colobines are endangered and would benefit from captive breeding programs, maintaining healthy captive populations of colobines can be difficult since they commonly suffer from morbidity and mortality due to gastrointestinal (GI) distress of unknown cause. While there is speculation that this GI distress may be associated with a dysbiosis of the gut microbiota, no study has directly examined the role of the gut microbiota in colobine GI health. In this study, we used high-throughput sequencing to examine the gut microbiota of three genera of colobines housed at the San Diego Zoo: doucs (Pygathrix) (N=7), colobus monkeys (Colobus) (N=4), and langurs (Trachypithecus) (N=5). Our data indicated that GI-healthy doucs, langurs, and colobus monkeys possess a distinct gut microbiota. In addition, GI-unhealthy doucs exhibited a different gut microbiota compared to GI-healthy individuals, including reduced relative abundances of anti-inflammatory Akkermansia. Finally, by comparing samples from wild and captive Asian colobines, we found that captive colobines generally exhibited higher relative abundances of potential pathogens such as Desulfovibrio and Methanobrevibacter compared to wild colobines, implying an increased risk of gut microbial dysbiosis. Together, these results suggest an association between the gut microbiota and GI illness of unknown cause in doucs. Further studies are necessary to corroborate these findings and determine cause-and-effect relationships. Additionally, we found minimal variation in the diversity and composition of the gut microbiota along the colobine GI tract, suggesting that fecal samples may be sufficient for describing the colobine gut microbiota. If these findings can be validated in wild individuals, it will facilitate the rapid expansion of colobine gut microbiome research

    Harnessing Polyhydroxyalkanoates and Pressurized Gyration for Hard and Soft Tissue Engineering

    Get PDF
    Organ dysfunction is a major cause of morbidity and mortality. Transplantation is typically the only definitive cure, challenged by the lack of sufficient donor organs. Tissue engineering encompasses the development of biomaterial scaffolds to support cell attachment, proliferation, and differentiation, leading to tissue regeneration. For efficient clinical translation, the forming technology utilized must be suitable for mass production. Herein, uniaxial polyhydroxyalkanoate scaffolds manufactured by pressurized gyration, a hybrid scalable spinning technique, are successfully used in bone, nerve, and cardiovascular applications. Chorioallantoic membrane and in vivo studies provided evidence of vascularization, collagen deposition, and cellular invasion for bone tissue engineering. Highly efficient axonal outgrowth was observed in dorsal root ganglion-based 3D ex vivo models. Human induced pluripotent stem cell derived cardiomyocytes exhibited a mature cardiomyocyte phenotype with optimal calcium handling. This study confirms that engineered polyhydroxyalkanoate-based gyrospun fibers provide an exciting and unique toolbox for the development of scalable scaffolds for both hard and soft tissue regeneration

    From Nonspecific DNA–Protein Encounter Complexes to the Prediction of DNA–Protein Interactions

    Get PDF
    ©2009 Gao, Skolnick. This is an open-access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.doi:10.1371/journal.pcbi.1000341DNA–protein interactions are involved in many essential biological activities. Because there is no simple mapping code between DNA base pairs and protein amino acids, the prediction of DNA–protein interactions is a challenging problem. Here, we present a novel computational approach for predicting DNA-binding protein residues and DNA–protein interaction modes without knowing its specific DNA target sequence. Given the structure of a DNA-binding protein, the method first generates an ensemble of complex structures obtained by rigid-body docking with a nonspecific canonical B-DNA. Representative models are subsequently selected through clustering and ranking by their DNA–protein interfacial energy. Analysis of these encounter complex models suggests that the recognition sites for specific DNA binding are usually favorable interaction sites for the nonspecific DNA probe and that nonspecific DNA–protein interaction modes exhibit some similarity to specific DNA–protein binding modes. Although the method requires as input the knowledge that the protein binds DNA, in benchmark tests, it achieves better performance in identifying DNA-binding sites than three previously established methods, which are based on sophisticated machine-learning techniques. We further apply our method to protein structures predicted through modeling and demonstrate that our method performs satisfactorily on protein models whose root-mean-square Ca deviation from native is up to 5 Å from their native structures. This study provides valuable structural insights into how a specific DNA-binding protein interacts with a nonspecific DNA sequence. The similarity between the specific DNA–protein interaction mode and nonspecific interaction modes may reflect an important sampling step in search of its specific DNA targets by a DNA-binding protein

    Seeking a practical definition of stable glaucoma: a Delphi consensus survey of UK glaucoma consultants

    Get PDF
    © 2019, The Author(s), under exclusive licence to The Royal College of Ophthalmologists. Background: To generate a practical and clinically useful consensus definition of ‘stable glaucoma’ to aid provision of glaucoma services in the UK and to provide guidance for the criteria that should be used for monitoring of glaucoma patients in primary care services. Methods: A Delphi exercise was undertaken to derive consensus through an online questionnaire. Participants were asked to score their strength of agreement for a series of clinical parameters. Results and comments from each round were used to inform subsequent rounds. A total of 3 rounds were undertaken. Results: Thirty-two glaucoma experts participated in the study with over 90% completion rate achieved over three rounds. The consensus was reached for the following parameters: IOP levels to be used for defining stability, visual field-testing techniques to define stability, the number of medication changes acceptable to define stability and the number of treatment medications allowed to define stability. No consensus was reached on the period of time over which stability was defined, however, there was considerable agreement that longer durations of follow up (36–48 months) were required. A combination of optic disc photos and ocular coherence topography (OCT) retinal nerve fibre layer (RNFL) assessment/ OCT disc structural evaluation are the preferred imaging methods for the assessment of structural stability. Oversight by a glaucoma consultant was considered important for glaucoma monitoring schemes. Conclusion: The consensus definition of glaucoma stability generated through this Delphi exercise provides guidance for allocation of patients suitable for monitoring in primary care glaucoma monitoring schemes

    Digital Work Design

    Get PDF
    Erworben im Rahmen der Schweizer Nationallizenzen (http://www.nationallizenzen.ch)More and more academic studies and practitioner reports claim that human work is increasingly disrupted or even determined by information and communication technology (ICT) (Cascio and Montealegre 2016). This will make a considerable share of jobs currently performed by humans susceptible to automation (e.g., Frey and Osborne 2017; Manyika et al. 2017). These reports often sketch a picture of ‘machines taking over’ traditional domains like manufacturing, while ICT advances and capabilities seem to decide companies’ fate. Consequently, ICT is often put at the core of innovative efforts. While this applies to nearly all areas of workplace design, a recent popular example of increasing technology centricity is ‘Industry 4.0’, which is often delineated as ‘machines talking to computers’
    • …
    corecore