Material tests of 316L austenitic stainless-clad steel at elevated temperatures

[EN] Mechanical properties of stainless-clad (SC) steel plates at elevated temperatures are key parameters for fire resistant design and numerical simulation analysis of SC steel structures. Compared with pure stainless steel and pure ordinary steel, SC steel not only combines advantages of the two component metals, but may also balance the performance and cost; however, it behaves quite differently in terms of material properties. In order to quantify this performance, tension coupon tests at room as well as elevated temperatures are conducted on the SC steel plate. Based on the test results, failure modes of the tension coupons are analysed, and full-range stress-strain curves are obtained; material properties are accordingly determined and described herein, and analyses are performed on several properties including yield strength, ultimate tensile stress, elastic modulus and elongation after fracture. It is found that with an increase of the temperature, both the elastic modulus and strengths are reduced remarkably. For determining these material properties quantitatively and developing robust constitutive models of the SC steel at elevated temperatures, more test data are needed, and the incorporation of the effects of the clad ratio on the material properties at both room and elevated temperatures is also necessary. The present research outcomes may provide valuable reference for fire design and calculations of the SC steel.This work was financially supported by the National Natural Science Foundation of China (Nos. 51608300, 51778329), which are gratefully acknowledged.Bai, R.; Ban, H.; Chung, K.; Bai, Y. (2018). Material tests of 316L austenitic stainless-clad steel at elevated temperatures. En Proceedings of the 12th International Conference on Advances in Steel-Concrete Composite Structures. ASCCS 2018. Editorial Universitat Politècnica de València. 851-855. https://doi.org/10.4995/ASCCS2018.2018.7011OCS85185

Research progress on material properties of clad steel

[EN] Clad steel possesses benefits of the both component metals in terms of mechanical performance, corrosion resistance, sustainability and lower full lifecycle cost, etc. As a result, it has been more and more widely used in the petroleum, chemical, marine, shipbuilding and metallurgical industries, including stainless-clad steel and titanium clad steel. Such clad steel has also great potential for application in building and bridge structures. For better understanding material properties of such clad steel, a review of research progress available in the literature is conducted herein, as well as recent research undertaken by the authors’ group at Tsinghua University. It can be found that very limited research reported in the literature mainly concerns static material properties of the clad steel, and primary relations between clad ratio and strength are suggested. The authors carried out material tests on both titanium and stainless-clad steel plates, with different clad ratios being incorporated. For the stainless-clad steel tests, both material and butt welded connections are tested, and various elevated temperatures are considered. In addition, tension coupon tests under cyclic loadings are also briefly introduced herein. Primary constitutive relations developed by the authors are reviewed in this paper. All the research findings and proposed formulae may provide an essential basis for future structural analysis, and may promote its application in structural engineering.This work was financially supported by the National Natural Science Foundation of China (Nos. 51778329, 51608300), which are gratefully acknowledged.Ban, H.; Bai, R.; Chung, K.; Zhu, J.; Bai, Y. (2018). Research progress on material properties of clad steel. En Proceedings of the 12th International Conference on Advances in Steel-Concrete Composite Structures. ASCCS 2018. Editorial Universitat Politècnica de València. 653-658. https://doi.org/10.4995/ASCCS2018.2018.7010OCS65365

Relevance of PUFA-derived metabolites in seminal plasma to male infertility

AimThis study aims to investigate the biological effects of polyunsaturated fatty acid (PUFA)-derived metabolites in seminal plasma on male fertility and to evaluate the potential of PUFA as a biomarker for normozoospermic male infertility.MethodsFrom September 2011 to April 2012, We collected semen samples from 564 men aged 18 to 50 years old (mean=32.28 years old)ch., residing in the Sandu County, Guizhou Province, China. The donors included 376 men with normozoospermia (fertile: n=267; infertile: n=109) and 188 men with oligoasthenozoospermia (fertile: n=121; infertile: n=67). The samples thus obtained were then analyzed by liquid chromatography-mass spectrometry (LC-MS) to detect the levels of PUFA-derived metabolites in April 2013. Data were analyzed from December 1, 2020, to May 15, 2022.ResultsOur analysis of propensity score-matched cohorts revealed that the concentrations of 9/26 and 7/26 metabolites differed significantly between fertile and infertile men with normozoospermia and oligoasthenozoospermia, respectively (FDR < 0.05). In men with normozoospermia, higher levels of 7(R)-MaR1 (HR: 0.4 (95% CI [0.24, 0.64]) and 11,12-DHET (0.36 (95% CI [0.21, 0.58]) were significantly associated with a decreased risk of infertility, while higher levels of 17(S)-HDHA (HR: 2.32 (95% CI [1.44, 3.79]), LXA5 (HR: 8.38 (95% CI [4.81, 15.24]), 15d-PGJ2 (HR: 1.71 (95% CI [1.06, 2.76]), and PGJ2 (HR: 2.28 (95% CI [1.42, 3.7]) correlated with an increased risk of infertility. Our ROC model using the differentially expressed metabolites showed the value of the area under the curve to be 0.744.ConclusionThe PUFA-derived metabolites 7(R)-MaR1, 11,12-DHET, 17(S)-HDHA, LXA5, and PGJ2 might be considered as potential diagnostic biomarkers of infertility in normozoospermic men

Fructose-1,6-bisphosphate and aldolase mediate glucose sensing by AMPK

葡萄糖是生物中最基本、最主要的营养物质，它不仅是机体能量的主要来源，也是生物质合成的主要原料。因此，葡萄糖的水平对于生物体是极其重要的。然而，在生活中，体内葡萄糖水平的波动是十分常见的，这是因为我们不可能每时每刻都在摄入葡萄糖：睡一大觉、剧烈运动几个小时或者太忙了没时间吃饭，都会引起葡萄糖水平的显著下降。这时，机体能够触发一套有效的过程应对这类“不利情况”，其中最为关键的就是激活“代谢的核心调节”——AMPK。在葡萄糖水平下降时，被激活的AMPK能够迅速启动脂肪、蛋白质的分解代谢，关闭它们的合成代谢，从而起到维持机体的能量和物质代谢的平衡，弥补机体因葡萄糖不足引起的胁迫压力。那么，机体如何感受葡萄糖水平下降，并“传递”给AMPK使其激活呢？林圣彩教授课题组的这项研究正是发现了生理状态下机体感受葡萄糖水平的机制。通过研究他们发现，无论在不含葡萄糖的细胞培养条件下，还是在饥饿的低血糖的动物体内，都不能观测到AMP水平的上升，这充分说明了机体有一套尚不为人知的、独立于AMP的感应葡萄糖水平的机制。在进一步的研究中他们揭示了这一完整过程：葡萄糖水平下降将引起的葡萄糖代谢中间物——果糖1,6-二磷酸（fructose-1,6-bisphosphate）水平的下降，该过程进一步地被糖酵解通路上的代谢酶——醛缩酶（aldolase）感应，因为醛缩酶正是将含有6个碳原子的果糖1,6-二磷酸裂解成三碳糖的酶，一旦醛缩酶“吃不到”由葡萄糖衍生的果糖1,6-二磷酸，它便“翻脸”，传递给也正是林圣彩教授课题组先前发现的溶酶体途径进而激活AMPK。该过程完全不涉及AMP水平，即能量水平的变化，是一条全新的、完全建立在实际的生理情况上的通路。林圣彩教授进一步地把葡萄糖水平总结为一种“状态信号”，以区别于传统的“能量信号”。据悉，该葡萄糖感知通路的发现对开发用于治疗肥胖症，乃至延长寿命的药物具有深远的意义。【Abstract】The major energy source for most cells is glucose, from which ATP is generated via glycolysis and/or oxidative metabolism. Glucose deprivation activates AMP-activated protein kinase (AMPK)1, but it is unclear whether this activation occurs solely via changes in AMP or ADP, the classical activators of AMPK2, 3, 4, 5. Here, we describe an AMP/ADP-independent mechanism that triggers AMPK activation by sensing the absence of fructose-1,6-bisphosphate (FBP), with AMPK being progressively activated as extracellular glucose and intracellular FBP decrease. When unoccupied by FBP, aldolases promote the formation of a lysosomal complex containing at least v-ATPase, ragulator, axin, liver kinase B1 (LKB1) and AMPK, which has previously been shown to be required for AMPK activation6, 7. Knockdown of aldolases activates AMPK even in cells with abundant glucose, whereas the catalysis-defective D34S aldolase mutant, which still binds FBP, blocks AMPK activation. Cell-free reconstitution assays show that addition of FBP disrupts the association of axin and LKB1 with v-ATPase and ragulator. Importantly, in some cell types AMP/ATP and ADP/ATP ratios remain unchanged during acute glucose starvation, and intact AMP-binding sites on AMPK are not required for AMPK activation. These results establish that aldolase, as well as being a glycolytic enzyme, is a sensor of glucose availability that regulates AMPK.D.G.H. was supported by an Investigator Award from the Wellcome Trust (097726) and a Programme Grant from Cancer Research UK (C37030/A15101). S.-C.L. was supported by grants from the National Key Research and Development Project of China (2016YFA0502001) and the National Natural Science Foundation of China (#31430094, #31690101, #31571214, #31601152 and #J1310027)

The Lysosomal v-ATPase-Ragulator Complex Is a Common Activator for AMPK and mTORC1, Acting as a Switch between Catabolism and Anabolism

林圣彩教授课题组长期致力于细胞信号转导的研究。近年来，该课题组潜心研究，不断攻关，取得了一系列重大成果，如揭示细胞如何应对生长因子缺乏的内在机理，发现了细胞自噬“路线图”、还发现了细胞如何感应“饥饿”信号AMP的信号传导通路等。其中，“发现细胞自噬‘路线图’”成果曾登上《科学》杂志，并入选2012年度“中国科学十大进展”。AMPK and mTOR play principal roles in governing metabolic programs; however, mechanisms underlying the coordination of the two inversely regulated kinases remain unclear. In this study we found, most surprisingly, that the late endosomal/lysosomal protein complex v-ATPase-Ragulator, essential for activation of mTORC1, is also required for AMPK activation. We also uncovered that AMPK is a residential protein of late endosome/lysosome. Under glucose starvation, the v-ATPase-Ragulator complex is accessible to AXIN/LKB1 for AMPK activation. Concurrently, the guanine nucleotide exchange factor (GEF) activity of Ragulator toward RAG is inhibited by AXIN, causing dissociation from endosome and inactivation of mTORC1. We have thus revealed that the v-ATPase-Ragulator complex is also an initiating sensor for energy stress and meanwhile serves as an endosomal docking site for LKB1-mediated AMPK activation by forming the v-ATPase-Ragulator-AXIN/LKB1-AMPK complex, thereby providing a switch between catabolism and anabolism. Our current study also emphasizes a general role of late endosome/lysosome in controlling metabolic programs

Prostaglandin I2 Signaling Drives Th17 Differentiation and Exacerbates Experimental Autoimmune Encephalomyelitis

BACKGROUND: Prostaglandin I(2) (PGI(2)), a lipid mediator currently used in treatment of human disease, is a critical regulator of adaptive immune responses. Although PGI(2) signaling suppressed Th1 and Th2 immune responses, the role of PGI(2) in Th17 differentiation is not known. METHODOLOGY/PRINCIPAL FINDINGS: In mouse CD4(+)CD62L(+) naïve T cell culture, the PGI(2) analogs iloprost and cicaprost increased IL-17A and IL-22 protein production and Th17 differentiation in vitro. This effect was augmented by IL-23 and was dependent on PGI(2) receptor IP signaling. In mouse bone marrow-derived CD11c(+) dendritic cells (BMDCs), PGI(2) analogs increased the ratio of IL-23/IL-12, which is correlated with increased ability of BMDCs to stimulate naïve T cells for IL-17A production. Moreover, IP knockout mice had delayed onset of a Th17-associated neurological disease, experimental autoimmune encephalomyelitis (EAE), and reduced infiltration of IL-17A-expressing mononuclear cells in the spinal cords compared to wild type mice. These results suggest that PGI(2) promotes in vivo Th17 responses. CONCLUSION: The preferential stimulation of Th17 differentiation by IP signaling may have important clinical implications as PGI(2) and its analogs are commonly used to treat human pulmonary hypertension

Use of nanomaterials in the pretreatment of water samples for environmental analysis

The challenge of providing clean drinking water is of enormous relevance in today’s human civilization, being essential for human consumption, but also for agriculture, livestock and several industrial applications. In addition to remediation strategies, the accurate monitoring of pollutants in water sup-plies, which most of the times are present at low concentrations, is a critical challenge. The usual low concentration of target analytes, the presence of in-terferents and the incompatibility of the sample matrix with instrumental techniques and detectors are the main reasons that renders sample preparation a relevant part of environmental monitoring strategies. The discovery and ap-plication of new nanomaterials allowed improvements on the pretreatment of water samples, with benefits in terms of speed, reliability and sensitivity in analysis. In this chapter, the use of nanomaterials in solid-phase extraction (SPE) protocols for water samples pretreatment for environmental monitoring is addressed. The most used nanomaterials, including metallic nanoparticles, metal organic frameworks, molecularly imprinted polymers, carbon-based nanomaterials, silica-based nanoparticles and nanocomposites are described, and their applications and advantages overviewed. Main gaps are identified and new directions on the field are suggested.publishe

Role of lipid peroxidation derived 4-hydroxynonenal (4-HNE) in cancer: Focusing on mitochondria

Oxidative stress-induced lipid peroxidation has been associated with human physiology and diseases including cancer. Overwhelming data suggest that reactive lipid mediators generated from this process, such as 4-hydroxynonenal (4-HNE), are biomarkers for oxidative stress and important players for mediating a number of signaling pathways. The biological effects of 4-HNE are primarily due to covalent modification of important biomolecules including proteins, DNA, and phospholipids containing amino group. In this review, we summarize recent progress on the role of 4-HNE in pathogenesis of cancer and focus on the involvement of mitochondria: generation of 4-HNE from oxidation of mitochondria-specific phospholipid cardiolipin; covalent modification of mitochondrial proteins, lipids, and DNA; potential therapeutic strategies for targeting mitochondrial ROS generation, lipid peroxidation, and 4-HNE