60 research outputs found
Calibration of dosemeters used in mammography with different X ray qualities: Euromet Project No. 526
The effect of different X ray radiation qualities on the calibration of mammographic dosemeters was investigated within the framework of a EUROMET (European Collaboration in Measurement Standards) project. The calibration coefficients for two ionization chambers and two semiconductor detectors were established in 13 dosimetry calibration laboratories for radiation qualities used in mammography. They were compared with coefficients for other radiation qualities, including those defined in ISO 4037-1, with first half value layers in the mammographic range. The results indicate that the choice of the radiation quality is not crucial for instruments with a small energy dependence of the response. However, the radiation quality has to be chosen carefully if instruments with a marked dependence of their response to the radiation energy are calibrate
Calibration of dosemeters used in mammography with different X ray qualities: EUROMET project no. 526
An enhanced gas ionization sensor from Y-doped vertically aligned conductive ZnO nanorods
A stable and highly sensitive gas ionization sensor (GIS) constructed from vertically aligned, conductive yttrium–doped ZnO nanorod (YZO NR) arrays is demonstrated. The conductive YZO NRs are synthesized using a facile one-pot hydrothermal method. At higher Y/Zn molar ratio, the aspect ratio of the YZO NRs is increased from 11 to 25. Doping with yttrium atoms decreases the electrical resistivity of ZnO NRs more than 100 fold. GIS measurements reveal a 6-fold enhancement in the sensitivity accompanied with a significant reduction in breakdown voltage from the highly conductive YZO NRs. Direct correlations between the resistivity of the NRs and GIS characteristics are established
Thermal inkjet printing of copper tetrasulfonated phthalocyanine (CuTsPc) as a semiconducting layer on flexible MIS capacitors
Examination frequencies and patient doses from computed tomography examinations in the area of Athens, Greece
A survey was conducted in the Athens region between the years 1996-1997, in which 33 CT scanner facilities from the 67 operating in this area participated. Examination frequencies from the 33 scanners were 187,875 per year for all types of examinations. Using published estimations for the mean effective dose for each type of examination, it was estimated that the collective dose from the above examinations was about 1,100 person-Sv, which, if projected to the total number of 152 CT scanners operating in Greece at the time of the survey, results in about 0.5 mSv per caput dose each year for the Greek population, which is probably the highest in Europe
Examination frequencies and patient doses from computed tomography examinations in the area of Athens, Greece
A survey was conducted in the Athens region between the years 1996-1997, in which 33 CT scanner facilities from the 67 operating in this area participated. Examination frequencies from the 33 scanners were 187,875 per year for all types of examinations. Using published estimations for the mean effective dose for each type of examination, it was estimated that the collective dose from the above examinations was about 1,100 person-Sv, which, if projected to the total number of 152 CT scanners operating in Greece at the time of the survey, results in about 0.5 mSv per caput dose each year for the Greek population, which is probably the highest in Europe
Comparison of radiation shielding requirements for HDR brachytherapy using [sup 169]Yb and [sup 192]Ir sources
Establishment of diagnostic reference levels for dental intraoral radiography
Diagnostic reference levels (DRLs) is a tool for the optimisation of radiological procedures. Establishment of a DRL is a requirement of national regulations. Measurements performed by the Greek Atomic Energy Commission on 529 dental intraoral radiographic facilities have been used in order to define DRLs for digital and film imaging modalities, taking into account the region of the mouth to be imaged. Thus, different DRL values have been proposed for minimum (usually incisors), maximum (usually maxillary molars) and average exposure settings, both for film and digital imaging. The results have been compared with similar studies performed in Europe and the USA and are in line with the most recent ones. ©The Author 2013. Published by Oxford University Press
- …