Low temperature reduction of hexavalent chromium by a microbial enrichment consortium and a novel strain of Arthrobacter aurescens

BACKGROUND: Chromium is a transition metal most commonly found in the environment in its trivalent [Cr(III)] and hexavalent [Cr(VI)] forms. The EPA maximum total chromium contaminant level for drinking water is 0.1 mg/l (0.1 ppm). Many water sources, especially underground sources, are at low temperatures (less than or equal to 15 Centigrade) year round. It is important to evaluate the possibility of microbial remediation of Cr(VI) contamination using microorganisms adapted to these low temperatures (psychrophiles). RESULTS: Core samples obtained from a Cr(VI) contaminated aquifer at the Hanford facility in Washington were enriched in Vogel Bonner medium at 10 Centigrade with 0, 25, 50, 100, 200, 400 and 1000 mg/l Cr(VI). The extent of Cr(VI) reduction was evaluated using the diphenyl carbazide assay. Resistance to Cr(VI) up to and including 1000 mg/l Cr(VI) was observed in the consortium experiments. Reduction was slow or not observed at and above 100 mg/l Cr(VI) using the enrichment consortium. Average time to complete reduction of Cr(VI) in the 30 and 60 mg/l Cr(VI) cultures of the consortium was 8 and 17 days, respectively at 10 Centigrade. Lyophilized consortium cells did not demonstrate adsorption of Cr(VI) over a 24 hour period. Successful isolation of a Cr(VI) reducing organism (designated P4) from the consortium was confirmed by 16S rDNA amplification and sequencing. Average time to complete reduction of Cr(VI) at 10 Centigrade in the 25 and 50 mg/l Cr(VI) cultures of the isolate P4 was 3 and 5 days, respectively. The 16S rDNA sequence from isolate P4 identified this organism as a strain of Arthrobacter aurescens, a species that has not previously been shown to be capable of low temperature Cr(VI) reduction. CONCLUSION: A. aurescens, indigenous to the subsurface, has the potential to be a predominant metal reducer in enhanced, in situ subsurface bioremediation efforts involving Cr(VI) and possibly other heavy metals and radionuclides

Technologies to deliver food and climate security through agriculture

Acknowledgements D.J.B. and S.A.B. acknowledge funding from the Leverhulme Trust through a Leverhulme Research Centre Award (RC-2015-029). S.P.L. acknowledges funding from the DOE Center for Advanced Bioenergy and Bioproducts Innovation (US Department of Energy, Office of Science, Office of Biological and Environmental Research under award number DE-SC0018420). The input of P.S. contributes to the DEVIL (NE/M021327/1) and Soils‐R‐GRREAT (NE/P019455/1) projects.Peer reviewedPostprin

The influence of exposure and physiology on microplastic ingestion by the freshwater fish Rutilus rutilus (roach) in the River Thames, UK

Microplastics are widespread throughout aquatic environments. However, there is currently insufficient understanding of the factors influencing ingestion of microplastics by organisms, especially higher predators such as fish. In this study we link ingestion of microplastics by the roach Rutilus rutilus, within the non-tidal part of the River Thames, to exposure and physiological factors. Microplastics were found within the gut contents of roach from six out of seven sampling sites. Of sampled fish, 33% contained at least one microplastic particle. The majority of particles were fibres (75%), with fragments and films also seen (22.7% and 2.3% respectively). Polymers identified were polyethylene, polypropylene and polyester, in addition to a synthetic dye. The maximum number of ingested microplastic particles for individual fish was strongly correlated to exposure (based on distance from the source of the river). Additionally, at a given exposure, the size of fish correlated with the actual quantity of microplastics in the gut. Larger (mainly female) fish were more likely to ingest the maximum possible number of particles than smaller (mainly male) fish. This study is the first to show microplastic ingestion within freshwater fish in the UK and provides valuable new evidence of the factors influencing ingestion that can be used to inform future studies on exposure and hazard of microplastics to fish

Application of Transmetalation to the Synthesis of Planar Chiral and Chiral-at-Metal Iridacycles

Diastereoselective lithiation of (S)-2-ferrocenyl-4-(1-methylethyl)oxazoline followed by addition of HgCl2 resulted in the formation by transmetallation of an (S,Sp)-configured mercury substituted complex. Addition to this of [Cp*IrCl2]2 and tetrabutylammonium chloride resulted in a second transmetallation reaction and formation of an (S,Sp,RIr)-configured chloride-substituted half-sandwich iridacycle as exclusively a single diastereoisomer. By reversing the lithiation diastereoselectivity by use of a deuterium blocking group an alternative (S,Rp,SIr)-configured iridacycle was synthesised similarly. Use of (R)-Ugi’s amine as substrate in the lithiation/double transmetallation sequence gave a (R,Sp,SIr)-configured half-sandwich iridacycle, complexes of this type being previously unavailable by direct cycloiridation. Lithium to gold transmetallation was also demonstrated with the synthesis of an (S,Sp)-configured Au(I) ferrocenyloxazoline derivative. Use of the (S,Rp,SIr)-iridacycle as a catalyst for the formation of a chiral product by reductive amination with azeotropic HCO2H/NEt3 resulted in a racemate

Chromophore-labelled, luminescent platinum complexes: syntheses, structures, and spectroscopic properties

Ligands based upon 4-carboxamide-2-phenylquinoline derivatives have been synthesised with solubilising octyl hydrocarbon chains and tethered aromatic chromophores to give naphthyl (HL2), anthracenyl (HL3) and pyrenyl (HL4) ligand variants, together with a non-chromophoric analogue (HL1) for comparison. 1H NMR spectroscopic studies of the ligands showed that two non-interchangeable isomers exist for HL2 and HL4 while only one isomer exists for HL1 and HL3. Supporting DFT calculations on HL4 suggest that the two isomers may be closely isoenergetic with a relatively high barrier to exchange of ca. 100 kJ mol−1. These new ligands were cyclometalated with Pt(II) to give complexes [Pt(L1–4)(acac)] (acac = acetylacetonate). The spectroscopically characterised complexes were studied using multinuclear NMR spectroscopy including 195Pt{1H} NMR studies which revealed δPt ca. −2785 ppm for [Pt(L1–4)(acac)]. X-ray crystallographic studies were undertaken on [Pt(L3)(acac)] and [Pt(L4)(acac)], each showing the weakly distorted square planar geometry at Pt(II); the structure of [Pt(L3)(acac)] showed evidence for intermolecular Pt–Pt interactions. The UV-vis. absorption studies show that the spectral profiles for [Pt(L2–4)(acac)] are a composite of the organic chromophore centred bands and a broad 1MLCT (5d → π*) band (ca. 440 nm) associated with the complex. Luminescence studies showed that complexes [Pt(L2–4)(acac)] are dual emissive with fluorescence characteristic of the tethered fluorophore and long-lived phosphorescence attributed to 3MLCT emission. In the case of the pyrenyl derivative, [Pt(L4)(acac)], the close energetic matching of the 3MLCT and 3LCpyr excited states led to an elongation of the 3MLCT emission lifetime (τ = 42 μs) under degassed solvent conditions, suggestive of energy transfer processes between the two states

Strong, spectrally-tunable chirality in diffractive metasurfaces

The authors acknowledge the support of the Canada Excellence Research Chairs Program. P.B. acknowledges the support from the Alexander von Humboldt Foundation.Metamaterials and metasurfaces provide a paradigm-changing approach for manipulating light. Their potential has been evinced by recent demonstrations of chiral responses much greater than those of natural materials. Here, we demonstrate theoretically and experimentally that the extrinsic chiral response of a metasurface can be dramatically enhanced by near-field diffraction effects. At the core of this phenomenon are lattice plasmon modes that respond selectively to the illumination’s polarization handedness. The metasurface exhibits sharp features in its circular dichroism spectra, which are tunable over a broad bandwidth by changing the illumination angle over a few degrees. Using this property, we demonstrate an ultra-thin circular-polarization sensitive spectral filter with a linewidth of ~10 nm, which can be dynamically tuned over a spectral range of 200 nm. Chiral diffractive metasurfaces, such as the one proposed here, open exciting possibilities for ultra-thin photonic devices with tunable, spin-controlled functionality.Publisher PDFPeer reviewe

Spray Printing of Organic Semiconducting Single Crystals

Single-crystal semiconductors have been at the forefront of scientific interest for more than 70 years, serving as the backbone of electronic devices. Inorganic single crystals are typically grown from a melt using time-consuming and energy-intensive processes. Organic semiconductor single crystals, however, can be grown using solution-based methods at room temperature in air, opening up the possibility of large-scale production of inexpensive electronics targeting applications ranging from field-effect transistors and light-emitting diodes to medical X-ray detectors. Here we demonstrate a low-cost, scalable spray-printing process to fabricate high-quality organic single crystals, based on various semiconducting small molecules on virtually any substrate by combining the advantages of antisolvent crystallization and solution shearing. The crystals’ size, shape and orientation are controlled by the sheer force generated by the spray droplets’ impact onto the antisolvent’s surface. This method demonstrates the feasibility of a spray-on single-crystal organic electronics

N-(4,6-Dimethyl­pyrimidin-2-yl)-1,3-benzothia­zol-2-amine

In the title compound, C13H12N4S, an amino N atom is connected to a 1,3-benzothia­zole fused-ring system and a dimethyl-substituted pyrimidine ring, these components being aligned [inter­planar dihedral angle = 1.9 (1)°]. The secondary amino N atom forms an inter­molecular N—H⋯N hydrogen bond to an N atom of the fused ring of an adjacent mol­ecule, generating a centrosymmetric cyclic hydrogen-bonded dimer [graph set R 2 2(8)]