1,013 research outputs found
The Truth in Compatibilism and the truth of Libertarianism
The paper offers the outlines of a response to the often-made suggestion is that it is impossible to see how indeterminism could possibly provide us with anything that we might want in the way of freedom, anything that could really amount to control, as opposed merely to an openness in the flow of reality that would constitute merely the injection of chance, or randomness, into the unfolding of the processes which underlie our activity. It is suggested that the best first move for the libertarian is to make a number of important concessions to the compatibilist. It should be conceded, in particular, that certain sorts of alternative possibilities are neither truly available to real, worldly agents, nor required in order that those agents should act freely; and it should be admitted also that it is the compatibilist who tends to give the most plausible sorts of analyses of many of the ācanā and ācould haveā statements which seem to need to be assertible of those agents we regard as free. But these concessions do not bring compatibilism itself in their wake. The most promising version of libertarianism, it is argued, should be based on the idea that agency itself (and not merely some special instances of it which we might designate with the honorific appellation āfreeā) is inconsistent with determinism. This version of libertarianism, it is claimed, can avoid the objection that indeterminism is as difficult to square with true agential control as determinism can sometimes seem to be
Human Performance Assessments in Cadet Populations
This study assessed potential physiological differences between the Ranger Challenge (RC) Competition team and junior year cadets in an Army Reserve Officer Training Corps (ROTC) program. The method included: RC (m = 11, f = 2) and junior year cadets (m = 7, f = 3) were assessed in the following areas: 1) quickness and agility (5-10-5 shuttle run), 2) total-body power (standing broad jump), and 3) grip strength (hand grip dynamometry) assessed. The 5-10-5 shuttle run was performed twice (opening once to the left and once to the right). The standing broad jump required that cadets stand with their toes behind a line, perform a maximum of three preparatory movements, triple extend their knees, hips, and ankles while using their upper body to propel them as far forward as possible. After the jump the distanced reached was measured from the line to the heel of the nearest foot. Hand grip dynamometry was performed once on each hand. The cadet held the dynamometer out to his or her side and squeezed it as they lowered it to their hip. The results were that there were no significant differences between groups for the 5-10-5 shuttle run (p = 0.91), standing broad jump (p = 0.49), or grip strength (p = 0.31). RC did not outperform
The linear tearing instability in three dimensional, toroidal gyrokinetic simulations
Linear gyro-kinetic simulations of the classical tearing mode in
three-dimensional toroidal geometry were performed using the global gyro
kinetic turbulence code, GKW . The results were benchmarked against a
cylindrical ideal MHD and analytical theory calculations. The stability, growth
rate and frequency of the mode were investigated by varying the current
profile, collisionality and the pressure gradients. Both collision-less and
semi-collisional tearing modes were found with a smooth transition between the
two. A residual, finite, rotation frequency of the mode even in the absense of
a pressure gradient is observed which is attributed to toroidal finite
Larmor-radius effects. When a pressure gradient is present at low
collisionality, the mode rotates at the expected electron diamagnetic
frequency. However the island rotation reverses direction at high
collisionality. The growth rate is found to follow a scaling with
collisional resistivity in the semi-collisional regime, closely following the
semi-collisional scaling found by Fitzpatrick. The stability of the mode
closely follows the stability using resistive MHD theory, however a
modification due to toroidal coupling and pressure effects is seen
Judgment and the identity theory of truth
The identity theory of truth takes on different forms depending on whether it is combined with a dual relation or a multiple relation theory of judgment. This paper argues that there are two significant problems for the dual relation identity theorist regarding thought's answerability to reality, neither of which takes a grip on the multiple relation identity theory
Resistance training volume load with and without exercise displacement
Monitoring the resistance training volume load (VL) (sets Ć reps Ć load) is essential to managing resistance training and the recoveryā»adaptation process. Eight trained weightlifters, seven of which were at national level, participated in the study. VL was measured both with (VLwD) and without (VL) the inclusion of barbell displacement, across twenty weeks of training, in order to allow for comparisons to be made of these VL calculating methods. This consisted of recording the load, repetition count, and barbell displacement for every set executed. Comparisons were made between VL and VLwD for individual blocks of training, select training weeks, and select training days. Strong, statistically significant correlations (r ā„ 0.78, < 0.001) were observed between VL and VLwD between all training periods analyzed. -tests revealed statistically significant ( ā¤ 0.018) differences between VL and VLwD in four of the seven training periods analyzed. The very strong relationship between VL and VLwD suggest that a coach with time constraints and a large number of athletes can potentially spare the addition of displacement. However, differences in percent change indicate that coaches with ample time should include displacement in VL calculations, in an effort to acquire more precise workload totals
Reducing the susceptibility of lumped-element KIDs to two-level system effects
Arrays of lumped-element kinetic inductance detectors (LEKIDs) optically
coupled through an antenna-coupled transmission line are a promising candidate
for future cosmic microwave background (CMB) experiments. However, the
dielectric materials used for the microstrip architecture are known to degrade
the performance of superconducting resonators. In this paper, we investigate
the feasibility of microstrip coupling to a LEKID, focusing on a systematic
study of the effect of depositing amorphous silicon-nitride on a LEKID. The
discrete and spatially-separated inductive and capacitive regions of the LEKID
allow us to vary the degree of dielectric coverage and determine the
limitations of the microstrip coupling architecture. We show that by careful
removal of dielectric from regions of high electric field in the capacitor,
there is minimal degradation in dielectric loss tangent of a partially covered
lumped-element resonator. We present the effects on the resonant frequency and
noise power spectral density and, using the dark responsivity, provide an
estimate for the resulting detector sensitivity.Comment: Presented at the 18th International Workshop on Low Temperature
Detectors. Published in the Journal of Low Temperature Physic
Metal to ceramic joining for high temperature applications
The phenomenal growth rate for the use of engineering ceramics is attributed to successful scientific responses to industrial demand. These materials are replacing metal and its alloys in diverse applications from cutting tools and heat engine components to integrated circuits. Joining technology plays a vital role in this changing and evolving technology as success and failure comes with breaking new barriers. It is important to improve existing techniques and to develop new techniques that reliably join simple shape components to form complex assemblies or join dissimilar materials such as metal to ceramic. Joining of ceramics is not simple due to their high chemical stability and low coefficient of thermal expansion (CTE). Joining between metal and ceramic is usually carried out at elevated temperatures and upon cooling thermal residual stresses are induced that lead to joint failure or poor strength. Most metal-ceramic joints cannot be used over 500Ā°C primarily due to the low melting temperature of the interlayer. This investigation was concerned with the successful joining for higher temperature applications (above 500Ā°C) of two dissimilar high temperature oxidation and corrosion resistant materials, Fecralloy and silicon nitride. The primary focus was on the effects of process conditions upon the microstructure and mechanical properties of the joint and to also study/identify the joining mechanism. Two novel techniques were employed to join successfully the metal to ceramic. The first was by use of a thin Cu foil that did not remain after joining. Joining occurs by a process that results in partial melting of the Fecralloy interface, where Fe, Cr, Al and Cu reactively infiltrate into the silicon nitride. This liquid mixture causes partial dissolution of the silicon nitride interface, where Si and N diffuse into the Fecralloy. A thin reaction product layer was formed at the silicon nitride interface and our results suggested that this was AIN. The free surface Si and porosity of the silicon nitride along with the eutectic temperatures above 1100Ā°C are all vital for this joining process. The highest average shear strength of a Fecralloy-silicon nitride joint produced by the method was 67.5 MPa. The second route was that of a powder metallurgy one, where cold pressed Ni-Al (1:1 molar) compacts were used to join successfully the Fecralloy to silicon nitride. The formation of NiAl from its constituents is highly exothermic and this is initiated between 500-650Ā°C. The high temperature reached causes partial melting of the Fecralloy interface and dissolution/reactive wetting at the silicon nitride interface. Mostly Fe infiltrates the NiAl improving room temperature ductility, fracture toughness and yield strength. Molten Al from the interlayer reacts and wets the silicon nitride interface with small amount of infiltration and no reaction product forming. The reaction synthesis of NiAl was studied using DTA and TGA, where the effects of Ni particle size and heating rate were investigated. This joining process is highly dependant upon process conditions, the most important of which are applied pressure, heating rate and Ni/A1 particle size. The highest average shear strength attained was 94.30 MPa and this is attributed to good interfacial bonding, high pressure, moderate process temperature and dwell time. The exothermic formation of the NiAl interlayer that is densified and monophase was paramount for this joining process. The Bansal-Doremus kinetic model for evaluating the kinetic parameters from non-isothermal DTA data was shown to be valid. The results obtained were identical to those by other authors who used a different model and approach.EThOS - Electronic Theses Online ServiceGBUnited Kingdo
Effects of grain by-products as supplements for stocker cattle grazing bermudagrass
Two experiments were conducted to compare corn, dried distillersā grains (DDG), and pelleted soybean hulls (SH) as supplements for cattle grazing bermudagrass. In Exp. 1, 66 crossbred steers (306 Ā± 3.2 kg) were stratified by weight and allotted randomly to six 2.4-ha bermudagrass pastures for a 107-d study. One of three supplement treatments (corn, DDG, or SH) was assigned randomly to each pasture group and was offered at 0.5% (as fed) of body weight. Calves were weighed at 28-d intervals and supplement was adjusted after each weigh period. In Exp. 2, five ruminally cannulated steers grazed bermudagrass pasture and were individually fed supplements (corn, DDG, or SH) at 0.5% of body weight in a 3 x 3 replicated, incomplete Latin-square design with a 14-d adaptation and a 5-d sampling period. In Exp. 1, supplementation with DDG and corn increased (P \u3c 0.04) the average daily gain compared to supplementation with SH (0.89, 0.87, and 0.74 kg for DDG, corn, and SH, respectively). In Exp. 2, in situ dry-matter-disappearance kinetic measures of bermudagrass were not affected by type of supplementation. The potential extent of digestion for DDG (93%) was lower than for corn (97%, P = 0.01) and SH (96%, P = 0.06). Supplementation with corn or DDG at 0.5% of body weight improved the gain of stocker cattle grazing bermudagrass compared to supplementation with SH, but these differences were not explained by differences in bermudagrass degradation kinetic
Survey of Barbell Trajectory and Kinematics of the Snatch Lift from the 2015 World and 2017 Pan-American Weightlifting Championships
Analysis of elite performances is important to elucidate the characteristics of effective weightlifting technique contributing to the highest level of achievement. The general technique of the weightlifting movements is well established. However, it is also apparent that weightlifting technique can differ based on athlete characteristics. Thus, existing technical models may not accurately reflect current technique of top performers or be applied generically to athletes of different skill, size, sex, or ability. Therefore, the purpose of this descriptive study was to update the scientific knowledge of snatch technique of top international weightlifters. This study used video analysis to determine barbell trajectory and kinematics of 319 successful snatch attempts from two major international competitions. Relative frequencies of barbell trajectory types differed based on competition, sex, category, and ranking. No statistical differences were observed among the top-three performers for either sex for most kinematic variables, and there were no overall discernible patterns of effect size differences for individual or clusters of kinematic variables. The results of this study indicate that weightlifting success can be achieved with a variety of technique profiles
- ā¦