Acoustic phonon dynamics in thin-films of the topological insulator Bi2Se3

Transient reflectivity traces measured for nanometer-sized films of the topological insulator Bi2Se3 revealed GHz-range oscillations driven within the relaxation of hot carriers photoexcited with ultrashort laser pulses of 1.51 eV photon energy. These oscillations have been suggested to result from acoustic phonon dynamics, including coherent longitudinal acoustic phonons in the form of standing acoustic waves. An increase of oscillation frequency from ~35 to ~70 GHz with decreasing film thickness from 40 to 15 nm was attributed to the interplay between two different regimes employing traveling-acoustic-waves for films thicker than 40 nm and the film bulk acoustic wave resonator (FBAWR) modes for films thinner than 40 nm. The amplitude of oscillations decays rapidly for films below 15 nm thick when the indirect intersurface coupling in Bi2Se3 films switches the FBAWR regime to that of the Lamb wave excitation. The frequency range of coherent longitudinal acoustic phonons is in good agreement with elastic properties of Bi2Se3

Ultrafast carrier dynamics in thin-films of the topological insulator Bi2Se3

Transient reflectivity measurements of thin films, ranging from 6 to 40 nm in thickness, of the topological insulator Bi2Se3 revealed a strong dependence of the carrier relaxation time on the film thickness. For thicker films the relaxation dynamics are similar to those of bulk Bi2Se3, where the contribution of the bulk insulating phase dominates over that of the surface metallic phase. The carrier relaxation time shortens with decreasing film thickness, reaching values comparable to those of noble metals. This effect may result from the hybridization of Dirac cone states at the opposite surfaces for the thinnest films

Space Launch System Spacecraft and Payload Elements: Progress Toward Crewed Launch and Beyond

While significant and substantial progress continues to be accomplished toward readying the Space Launch System (SLS) rocket for its first test flight, work is already underway on preparations for the second flight - using an upgraded version of the vehicle - and beyond. Designed to support human missions into deep space, SLS is the most powerful human-rated launch vehicle the United States has ever undertaken, and is one of three programs being managed by the National Aeronautics and Space Administration's (NASA's) Exploration Systems Development division. The Orion spacecraft program is developing a new crew vehicle that will support human missions beyond low Earth orbit (LEO), and the Ground Systems Development and Operations (GSDO) program is transforming Kennedy Space Center (KSC) into a next-generation spaceport capable of supporting not only SLS but also multiple commercial users. Together, these systems will support human exploration missions into the proving ground of cislunar space and ultimately to Mars. For its first flight, SLS will deliver a near-term heavy-lift capability for the nation with its 70-metric-ton (t) Block 1 configuration. Each element of the vehicle now has flight hardware in production in support of the initial flight of the SLS, which will propel Orion around the moon and back. Encompassing hardware qualification, structural testing to validate hardware compliance and analytical modeling, progress is on track to meet the initial targeted launch date. In Utah and Mississippi, booster and engine testing are verifying upgrades made to proven shuttle hardware. At Michoud Assembly Facility (MAF) in Louisiana, the world's largest spacecraft welding tool is producing tanks for the SLS core stage. Providing the Orion crew capsule/launch vehicle interface and in-space propulsion via a cryogenic upper stage, the Spacecraft/Payload Integration and Evolution (SPIE) element serves a key role in achieving SLS goals and objectives. The SPIE element marked a major milestone in 2014 with the first flight of original SLS hardware, the Orion Stage Adapter (OSA) which was used on Exploration Flight Test-1 with a design that will be used again on the first flight of SLS. The element has overseen production of the Interim Cryogenic Propulsion Stage (ICPS), an in-space stage derived from the Delta Cryogenic Second Stage, which was manufactured at United Launch Alliance (ULA) in Decatur, Alabama, prior to being shipped to Florida for flight preparations. Manufacture of the OSA and the Launch Vehicle Stage Adapter (LVSA) took place at the Friction Stir Facility located at Marshall Space Flight Center (MSFC) in Huntsville, Alabama. Marshall is also home to the Integrated Structural Test of the ICPS, LVSA, and OSA, subjecting the stacked components to simulated stresses of launch. The SPIE Element is also overseeing integration of 13 "CubeSat" secondary payloads that will fly on the first flight of SLS, providing access to deep space regions in a way currently not available to the science community. At the same time as this preparation work is taking place toward the first launch of SLS, however, the Space Launch System Program is actively working toward its second launch. For its second flight, SLS will be upgraded to the more-capable Block 1B configuration. While the Block 1 configuration is capable of delivering more than 70 t to LEO, the Block 1B vehicle will increase that capability to 105 t. For that flight, the new configuration introduces two major new elements to the vehicle - an Exploration Upper Stage (EUS) that will be used for both ascent and in-space propulsion, and a Universal Stage Adapter (USA) that serves as a "payload bay" for the rocket, allowing the launch of large exploration systems along with the Orion spacecraft. Already, flight hardware is being prepared for the Block 1B vehicle. Welding is taking place on the second rocket's core stage. Flight hardware production has begun on booster components. An RS-25 engine slated for that flight has been tested. Development work is taking place on the EUS, with contracts in place for both the stage and the RL10 engines which will power it. (The EUS will use four RL10 engines, an increase from one on the ICPS.) For the crew configuration of the Block 1B vehicle, the SLS SPIE element is managing the USA and accompanying Payload Adapter, which will accommodate both large payloads co-manifested with Orion and small-satellite secondary payloads. This co-manifested payload capacity will be instrumental for missions into the proving ground around the moon, where NASA will test new systems and demonstrate new capabilities needed for human exploration farther into deep space

Effect of carrier recombination on ultrafast carrier dynamics in thin films of the topological insulator Bi2Se3

Transient reflectivity (TR) from thin films (6 - 40 nm thick) of the topological insulator Bi2Se3 reveal ultrafast carrier dynamics, which suggest the existence of both radiative and non-radiative recombination between electrons residing in the upper cone of initially unoccupied high energy Dirac surface states (SS) and holes residing in the lower cone of occupied low energy Dirac SS. The modeling of measured TR traces allowed us to conclude that recombination is induced by the depletion of bulk electrons in films below ~20 nm thick due to the charge captured on the surface defects. We predict that such recombination processes can be observed using time-resolved photoluminescence techniques

Written language outcomes of deaf elementary students engaged in authentic writing

This study explores the impact of Strategic and Interactive Writing Instruction (SIWI) on six students’ written language skills through the application of a multiple-baseline probe single case design with embedded condition. This was part of a larger Institute of Education Sciences (IES)-funded project focused on the development and feasibility of implementation of SIWI. For the majority of skills analyzed, there were improvements in the mean level of performance with the implementation of SIWI, as well as more consistent responding and positive trends in the data. The study also revealed that teachers are in need of additional tools to aid the systematic identification and tracking of syntax skills in children’s written language development, and to distinguish these from other writing skills such as convention or handwriting

Resonance-type thickness dependence of optical second harmonic generation in thin-films of the topological insulator Bi2Se3

Optical second harmonic generation (SHG) has been measured for the first time in reflection from the nanometer-thick films (6 to 40 nm) of the topological insulator Bi2Se3 using 1.51 eV (820 nm) Ti:Sapphire laser photons and revealed a strong dependence of the integral SHG intensity on the film thickness. The integral SHG intensity was determined by area integration of the SHG rotational anisotropy patterns measured for different input-output light polarization geometries. A ~100-fold enhancement of the integral SHG intensity with decreasing film thickness has been suggested to result from the DC-electric-field-induced SHG (EFISHG) effects. Two sources of dynamically created DC electric field were proposed: (i) the capacitor-type DC electric field that gradually increases with decreasing film thickness from 40 to 6 nm due to a dynamical imbalance of photoexcited long-lived carriers between the opposite-surface Dirac surface states and (ii) an DC electric field associated with a nonlinearly excited Dirac plasmon, which is responsible for the resonant enhancement of the integral SHG intensity for the 10 nm thick film with a Lorentz-shaped resonance of ~1.6 nm full width at half maximum. Additionally to the general SHG enhancement trends with decreasing film thickness, a relative decrease of the out-of-plane contribution with respect to the in-plane contribution was observed. Using a theoretical treatment of the measured SHG rotational anisotropy patterns, this effect has been suggested to result from the joint contributions of the linear and quadratic DC electric field effects to the EFISHG response

Nonlinear Optical Observation of Coherent Acoustic Dirac Plasmons in Thin-Film Topological Insulators

Low-energy collective electronic excitations exhibiting sound-like linear dispersion have been intensively studied both experimentally and theoretically for a long time. However, coherent acoustic plasmon modes appearing in time-domain measurements are rarely observed due to Landau damping by the single-particle continua. Here we report on the observation of coherent acoustic Dirac plasmon (CADP) modes excited in indirectly (electrostatically) opposite-surface coupled films of the topological insulator Bi2Se3. Using transient secondharmonic generation, a technique capable of independently monitoring the in-plane and out-of-plane electron dynamics in the films, the GHz-range oscillations were observed without corresponding oscillations in the transient reflectivity. These oscillations were assigned to the transverse magnetic and transverse electric guided CADP modes induced by the evanescent guided Lamb acoustic waves and remained Landau undamped due to fermion tunnelling between the opposite-surface Dirac state

Nonlinear Optical Observation of Coherent Acoustic Dirac Plasmons in Thin-Film Topological Insulators

Low-energy collective electronic excitations exhibiting sound-like linear dispersion have been intensively studied both experimentally and theoretically for a long time. However, coherent acoustic plasmon modes appearing in time-domain measurements are rarely observed due to Landau damping by the single-particle continua. Here we report on the observation of coherent acoustic Dirac plasmon (CADP) modes excited in indirectly (electrostatically) opposite-surface coupled films of the topological insulator Bi2Se3. Using transient secondharmonic generation, a technique capable of independently monitoring the in-plane and out-of-plane electron dynamics in the films, the GHz-range oscillations were observed without corresponding oscillations in the transient reflectivity. These oscillations were assigned to the transverse magnetic and transverse electric guided CADP modes induced by the evanescent guided Lamb acoustic waves and remained Landau undamped due to fermion tunnelling between the opposite-surface Dirac state

Disposable fiber optics telemetry for measuring while drilling

The project addressed the need of the oil and gas industry for real-time information about the drilling process and the formations being drilled. An ideal system would allow measuring while drilling (MWD) and would transmit data to the surface immediately at a rate high enough to support video or televiewer systems. A proposed solution was to use an optical fiber as a link between the surface and the instrumentation package. We explored the use of a disposable MWD telemetry cable, drawing on the technology developed for missile guidance which deploys miles of fiber from a small spool at missile speeds approaching half the speed of sound. Emphasis In was on the questions of survivability of the unarmored fiber in the drill string environment and deployability. Laboratory and field testing showed the concept worked under realistic conditions; a field demonstration transmitted data at 10 kilobits per second from a depth of 3500 feet

Electrodynamics of Media

Contains research objectives, summary of research and reports on two research projects.Joint Services Electronics Programs (U. S. Army, U. S. Navy, and U. S. Air Force) under Contract DAAB07-71-C-0300U. S. Army Research Office - Durham (Contract l)AHC04-72-C-0044)California Institute of Technology Contract 953524M.I.T. Sloan Fund for Basic Researc