InP microdisks for optical signal processing and data transmission

The performance increase in telecommunication and computing systems demands an ever increasing input-output (IO) bandwidth and IO density, which can be met by integrated photonics. Using photonic integration, much higher densities of optical components can be achieved allowing for short-range optical communication systems in, e.g., high performance computers. The key functionalities required for these optical communication systems are light generation, light modulation and light detection. In addition to this other functionalities are also desirable, such as wavelength conversion. This thesis highlights the design and fabrication of indium phosphide (InP) microdisks heterogeneously integrated on silicon-on-insulator substrates. The fabrication of the microdisks in a laboratory clean-room environment is described. These devices can fulfil the above-mentioned functions required in optical communication. Experiments are then performed on the fabricated devices dealing with these various functionalities that are required for optical communication. The lasing properties of the devices are shown and simulated with a spatiallydependent rate equation model accurately predicting the device behaviour. A detailed speed analysis is given, including a parameter extraction of the devices. The operation of the devices as detectors is highlighted. Furthermore the PhD thesis provides a deep analysis of the use of InP microdisks as modulators. Besides the forward-biased operation principle using the free-carrier plasma-dispersion effect, also a high-speed reversely biased operation mode is proposed and demonstrated experimentally. The thesis also describes various approaches on how to improve the performance of the devices, in particular when using them as lasers. Ways how to increase the output power and how to enhance the operation speed are discussed. Because the device is strongly dependent on the coupling between the resonant InP cavity and the silicon waveguide, an extensive analysis of the coupling and the influence of certain process steps on the device performance are given. The PhD thesis concludes the work carried out on InP microdisks and gives an outlook about improving the device performance with respect to specific applications and how to further improve the manufacturability of the devices. Finally, for the InP microdisk-based devices an outlook is given about suitable applications, such as on-chip optical links for instance

Observation of an orbital interaction-induced Feshbach resonance in 173-Yb

We report on the experimental observation of a novel inter-orbital Feshbach resonance in ultracold 173-Yb atoms, which opens the possibility of tuning the interactions between the 1S0 and 3P0 metastable state, both possessing vanishing total electronic angular momentum. The resonance is observed at experimentally accessible magnetic field strengths and occurs universally for all hyperfine state combinations. We characterize the resonance in the bulk via inter-orbital cross-thermalization as well as in a three-dimensional lattice using high-resolution clock-line spectroscopy.Comment: 5 pages, 4 figure

All-optical wavelength conversion using mode switching in InP microdisc laser

Wavelength conversion using an indium phosphide based microdisc laser (MDL) heterogeneously integrated on a silicon-on-insulator waveguide is reported. Several lasing modes are present within the disc cavity, between which wavelength conversion can be performed by mode switching and spectral filtering. For the first time, low-power wavelength up- and downconversion using one single MDL is demonstrated. Operation with a bit error rate below 10(-9) at 2.5 Gbit/s and operation below the forward-error-correction limit of 10(-3) at 10 Gbit/s are shown without the use of additional seeding beams

Overview of the EU FP7-project HISTORIC

HISTORIC aims to develop and test complex photonic integrated circuits containing a relatively large number of digital photonic elements for use in e.g. all-optical packet switching. These photonic digital units are all-optical flip-flops based on ultra compact laser diodes, such as microdisk lasers and photonic crystal lasers. These lasers are fabricated making use of the heterogeneous integration of InP membranes on top of silicon on insulator (SOI) passive optical circuits. The very small dimensions of the lasers are, at least for some approaches, possible because of the high index contrast of the InP membranes and by making use of the extreme accuracy of CMOS processing. All-optical flip-flops based on heterogeneously integrated microdisk lasers with diameter of 7.5 mu m have already been demonstrated. They operate with a CW power consumption of a few mW and can switch in 60ps with switching energies as low as 1.8 fJ. Their operation as all-optical gate has also been demonstrated. Work is also on-going to fabricate heterogeneously integrated photonic crystal lasers and all-optical flip-flops based on such lasers. A lot of attention is given to the electrical pumping of the membrane InP-based photonic crystal lasers and to the coupling to SOI wire waveguides. Optically pumped photonic crystal lasers coupled to SOI wires have been demonstrated already. The all-optical flip-flops and gates will be combined into more complex photonic integrated circuits, implementing all-optical shift registers, D flip-flops, and other all-optical switching building blocks. The possibility to integrate a large number of photonic digital units together, but also to integrate them with compact passive optical routers such as AWGs, opens new perspectives for the design of integrated optical processors or optical buffers. The project therefore also focuses on designing new architectures for such optical processing or buffer chips

High-speed direct-modulation of InP microdisk lasers

We demonstrate for the first time high-speed direct-modulation of InP microdisk lasers by exploiting longitudinal mode competition. High-speed operation is demonstrated by means of S21 and PRBS modulation. We show open eye diagrams and bit-error rates up to 10 Gb/s

Synthesis of 1‐Naphthol by a Natural Peroxygenase engineered by Directed Evolution

This is the peer reviewed version of the following article, which has been published in final form at 10.1002/cbic.201500493. This article may be used for non-commercial purposes in accordance With Wiley-VCH Terms and Conditions for self-archivingThere is an increasing interest in enzymes that catalyze the hydroxylation of naphthalene under mild conditions and with minimal requirements. To address this challenge, an extracellular fungal aromatic peroxygenase with mono(per)oxygenase activity was engineered to convert naphthalene selectively into 1-naphthol. Mutant libraries constructed by random mutagenesis and DNA recombination were screened for peroxygenase activity on naphthalene together with quenching of the undesired peroxidative activity on 1-naphthol (one-electron oxidation). The resulting double mutant (G241D-R257K) obtained from this process was characterized biochemically and computationally. The conformational changes produced by directed evolution improved the substrate's catalytic position. Powered exclusively by catalytic concentrations of H2O2, this soluble and stable biocatalyst has a total turnover number of 50 000, with high regioselectivity (97 %) and reduced peroxidative activity.We thank Paloma Santos Moriano (ICP, CSIC, Spain) for assistance with the HPLC and LC/MS analysis, and Jesper Vind (Novozymes, Denmark) and Angel T. Martinez (CIB, CSIC, Spain) for helpful discussions. This work was supported by the European Commission projects Indox-FP7-KBBE-2013-7-613549 and Cost-Action CM1303-Systems Biocatalysis, and the National Projects Dewry [BIO201343407-R], Cambios [RTC-2014-1777-3] and OXYdesign [CTQ2013-48287-R].Peer ReviewedPostprint (author's final draft

Self-sustained enzymatic cascade for the production of 2, 5-furandicarboxylic acid from 5-methoxymethylfurfural

Background: 2, 5-Furandicarboxylic acid is a renewable building block for the production of polyfurandicarboxylates, which are biodegradable polyesters expected to substitute their classical counterparts derived from fossil resources. It may be produced from bio-based 5-hydroxymethylfurfural or 5-methoxymethylfurfural, both obtained by the acidic dehydration of biomass-derived fructose. 5-Methoxymethylfurfural, which is produced in the presence of methanol, generates less by-products and exhibits better storage stability than 5-hydroxymethylfurfural being, therefore, the industrial substrate of choice. Results: In this work, an enzymatic cascade involving three fungal oxidoreductases has been developed for the production of 2, 5-furandicarboxylic acid from 5-methoxymethylfurfural. Aryl-alcohol oxidase and unspecific peroxygenase act on 5-methoxymethylfurfural and its partially oxidized derivatives yielding 2, 5-furandicarboxylic acid, as well as methanol as a by-product. Methanol oxidase takes advantage of the methanol released for in situ producing H2O2 that, along with that produced by aryl-alcohol oxidase, fuels the peroxygenase reactions. In this way, the enzymatic cascade proceeds independently, with the only input of atmospheric O2, to attain a 70% conversion of initial 5-methoxymethylfurfural. The addition of some exogenous methanol to the reaction further improves the yield to attain an almost complete conversion of 5-methoxymethylfurfural into 2, 5-furandicarboxylic acid. Conclusions: The synergistic action of aryl-alcohol oxidase and unspecific peroxygenase in the presence of 5-methoxymethylfurfural and O2 is sufficient for the production of 2, 5-furandicarboxylic acid. The addition of methanol oxidase to the enzymatic cascade increases the 2, 5-furandicarboxylic acid yields by oxidizing a reaction by-product to fuel the peroxygenase reactions