54 research outputs found

    Microbe-surface interactions in biofouling and biocorrosion processes

    Get PDF
    The presence of microorganisms on material surfaces can have a profound effect on materials performance. Surface-associated microbial growth, i.e. a biofilm, is known to instigate biofouling. The presence of biofilms may promote interfacial physico-chemical reactions that are not favored under abiotic conditions. In the case of metallic materials, undesirable changes in material properties due to a biofilm (or a biofouling layer) are referred to as biocorrosion or microbially influenced corrosion (MIC). Biofouling and biocorrosion occur in aquatic and terrestrial habitats varying in nutrient content, temperature, pressure and pH. Interfacial chemistry in such systems reflects a wide variety of physiological activities carried out by diverse microbial populations thriving within biofilms. Biocorrosion can be viewed as a consequence of coupled biological and abiotic electron-transfer reactions, i.e. redox reactions of metals, enabled by microbial ecology. Microbially produced extracellular polymeric substances (EPS), which comprise different macromolecules, mediate initial cell adhesion to the material surface and constitute a biofilm matrix. Despite their unquestionable importance in biofilm development, the extent to which EPS contribute to biocorrosion is not well-understood. This review offers a current perspective on material/microbe interactions pertinent to biocorrosion and biofouling, with EPS as a focal point, while emphasizing the role atomic force spectroscopy and mass spectrometry techniques can play in elucidating such interactions. [Int Microbiol 2005; 8(3):157-168

    Direct Profiling of Phytochemicals in Tulip Tissues and In Vivo Monitoring of the Change of Carbohydrate Content in Tulip Bulbs by Probe Electrospray Ionization Mass Spectrometry

    Get PDF
    Probe electrospray ionization (PESI) is a recently developed ESI-based ionization technique which generates electrospray from the tip of a solid needle. In this study, we have applied PESI interfaced with a time of flight mass spectrometer (TOF-MS) for direct profiling of phytochemicals in a section of a tulip bulb in different regions, including basal plate, outer and inner rims of scale, flower bud and foliage leaves. Different parts of tulip petals and leaves have also been investigated. Carbohydrates, amino acids and other phytochemicals were detected. A series of in vivo PESI-MS experiments were carried out on the second outermost scales of four living tulip bulbs to monitoring the change of carbohydrate content during the first week of initial growth. The breakdown of carbohydrates was observed which was in accordance with previous reports achieved by other techniques. This study has indicated that PESI-MS can be used for rapid and direct analysis of phytochemicals in living biological systems with advantages of low sample consumption and little sample preparation. Therefore, PESI-MS can be a new choice for direct analysis/profiling of bioactive compounds or monitoring metabolic changes in living biological systems

    On-site single pollen metabolomics reveals varietal differences in phosphatidylinositol synthesis under heat stress conditions in rice

    Get PDF
    Although a loss of healthy pollen grains induced by metabolic heat responses has been indicated to be a major cause of heat-induced spikelet sterility under global climate change, to date detailed information at pollen level has been lacking due to the technical limitations. In this study, we used picolitre pressure-probe-electrospray-ionization mass spectrometry (picoPPESI-MS) to directly determine the metabolites in heat-treated single mature pollen grains in two cultivars, heat-tolerant cultivar, N22 and heat-sensitive cultivar, Koshihikari. Heat-induced spikelet fertility in N22 and Koshihikari was 90.0% and 46.8%, respectively. While no treatment difference in in vitro pollen viability was observed in each cultivar, contrasting varietal differences in phosphatidylinositol (PI)(34:3) have been detected in mature pollen, together with other 106 metabolites. Greater PI content was detected in N22 pollen regardless of the treatment, but not for Koshihikari pollen. In contrast, there was little detection for phosphoinositide in the single mature pollen grains in both cultivars. Our findings indicate that picoPPESI-MS analysis can efficiently identify the metabolites in intact single pollen. Since PI is a precursor of phosphoinositide that induces multiple signaling for pollen germination and tube growth, the active synthesis of PI(34:3) prior to germination may be closely associated with sustaining spikelet fertility even at high temperatures.Fil: Wada, Hiroshi. Kyushu Okinawa Agricultural Research Center, National Agriculture and Food Research Organization; JapónFil: Hatakeyama, Yuto. Kyushu Okinawa Agricultural Research Center, National Agriculture and Food Research Organization; JapónFil: Nakashima, Taiken. Hokkaido University; JapónFil: Nonami, Hiroshi. Ehime University; JapónFil: Erra Balsells, Rosa. Consejo Nacional de Investigaciones Científicas y Técnicas. Oficina de Coordinación Administrativa Ciudad Universitaria. Centro de Investigaciones en Hidratos de Carbono. Universidad de Buenos Aires. Facultad de Ciencias Exactas y Naturales. Centro de Investigaciones en Hidratos de Carbono; ArgentinaFil: Hakata, Makoto. Kyushu Okinawa Agricultural Research Center, National Agriculture and Food Research Organization; JapónFil: Nakata, Keisuke. Ehime University; JapónFil: Hiraoka, Kenzo. University Of Yamanashi; JapónFil: Onda, Yayoi. Ehime University; JapónFil: Nakano, Hiroshi. Kyushu Okinawa Agricultural Research Center, National Agriculture and Food Research Organization; Japó

    クラスター二次イオン質量分析法の展望

    No full text

    CHARACTERISTIC ENERGY LOSSES BY SLOW ELECTRON IMPACT ON MOLECULAR SOLIDS

    No full text
    Author Institution: Department of Chemistry and the Radiation Laboratory, University of Notre Dame Notre DameQuantized energy losses by slow electron impact on solids are characteristic of the substance, but independent of its thickness and of the initial energy. They have been observed for aromatics, alkanes, alkenes, alcohols, acetone, ice, alkali halides and metals. Correlated luminescence has been investigated for some of these systems. The targets are supported thin films (100({\sim}100 \AA), usually at 77K77^{\circ} K, and in a 10910^{-9} torr enclosure. In one mode the backscattered electron current is energy-analyzed by a modulated retarding potential ramp at each incident energy. In a second mode the thermionic emitter ramp voltage V is modulated and the current I transmitted by the film is measured. In either case the spectrum is presented as dI/dV vs V. The range 0--50 eV has been used occasionally, but events lying below the first optically allowed transition are of principal interest. Such losses have been observed without exception in all systems examined

    Denaturation of Lysozyme and Myoglobin in Laser Spray

    Get PDF
    In laser spray, the tip of an electrospray capillary is irradiated with a continuous CO2 laser beam. Here, we report results from a modified laser spray method that employs a relatively low laser irradiance level. With a laser power of ∼2 W and a focal spot size (∼0.3 mm), which covered the entire front surface of the electrospray capillary, the irradiance was ∼3 × 103 W/cm2. This resulted in a quiescent and smooth vaporization of aqueous solutions. This “evaporation-mode” laser spray method yielded the best results so far obtained in our laboratory with laser-irradiated electrospray, producing higher and more stable signals. The method was applied to the analysis of aqueous solutions of lysozyme and myoglobin. Mass spectra were obtained as a function of laser power from 0 W (electrospray) to ∼2 W. The spray generated at the tip of the stainless steel capillary was observed with a CCD camera. With increase of laser power, the droplets in the spray became finer and the Taylor cone became progressively smaller. The strongest ion signals were recorded when the sample solution protruded only slightly from the tip of the capillary. A broadening of the lysozyme charge-state distribution, attributable to protein unfolding, was observed with a laser power of 2 W. No denaturation of myoglobin took place up to a laser power of 1.6 W. However, a sudden onset of denaturation was observed at 1.8 W as a broadening of the myoglobin charge distribution and the appearance of apo-myoglobin peaks. These findings demonstrate that laser spray is capable of dissociating the noncovalent complexes selectively without breaking covalent bonds

    Characteristics of Charged Droplet Beams Produced from Vacuum Electrospray

    No full text

    Development of an Ion Gun Using Vacuum Electrospray

    No full text

    Living Cell Manipulation, Manageable Sampling, and Shotgun Picoliter Electrospray Mass Spectrometry for Profiling Metabolites

    Get PDF
    A modified cell pressure probe and an online Orbitrap mass spectrometer were used to sample in situ plant single cells without any additional manipulation. The cell pressure probe, a quartz capillary tip filled with an oil mixture, was penetrated to various depths into parenchyma cells of tulip bulb scale, followed by a hydraulic continuity test to determine the exact location of the tip inside target cells. The operation was conducted under a digital microscope, and the capillary tip was photographed to calculate the volume of the cell sap sucked. The cell sap sample was then directly nebulized/ionized under high-voltage conditions at the entrance of the mass spectrometer. Several sugars, amino acids, organic acids, vitamins, fatty acids, and secondary metabolites were detected. Because picoliter solutions can be accurately handled and measured, known volumes of standard solutions can be added to cell sap samples inside the capillary tip to be used as references for metabolite characterization and relative quantitation. The high precision and sensitivity of the cell pressure probe and Orbitrap mass spectrometer allow for the manipulation and analysis of both femtoliter cell sap samples and standard solutions.Fil: Gholipour, Yousef. Ehime University; JapónFil: Erra Balsells, Rosa. Consejo Nacional de Investigaciones Científicas y Técnicas. Oficina de Coordinación Administrativa Ciudad Universitaria. Centro de Investigaciones en Hidratos de Carbono; ArgentinaFil: Hiraoka, Kenzo. University of Yamanash; JapónFil: Nonami, Hiroshi. Ehime University; Japó

    Application of Electrospray Droplet Impact (EDI) to Surface Science

    No full text
    corecore