1,898 research outputs found
Air pollution from aircraft
A model which predicts nitric oxide and carbon monoxide emissions from a swirl can modular combustor is discussed. A detailed analysis of the turbulent fuel-air mixing process in the swirl can module wake region is reviewed. Hot wire anemometry was employed, and gas sampling analysis of fuel combustion emissions were performed
Air pollution from aircraft
A series of fundamental problems related to jet engine air pollution and combustion were examined. These include soot formation and oxidation, nitric oxide and carbon monoxide emissions mechanisms, pollutant dispension, flow and combustion characteristics of the NASA swirl can combustor, fuel atomization and fuel-air mixing processes, fuel spray drop velocity and size measurement, ignition and blowout. A summary of this work, and a bibliography of 41 theses and publications which describe this work, with abstracts, is included
Computer simulation of the heavy-duty turbo-compounded diesel cycle for studies of engine efficiency and performance
Reductions in heat loss at appropriate points in the diesel engine which result in substantially increased exhaust enthalpy were shown. The concepts for this increased enthalpy are the turbocharged, turbocompounded diesel engine cycle. A computer simulation of the heavy duty turbocharged turbo-compounded diesel engine system was undertaken. This allows the definition of the tradeoffs which are associated with the introduction of ceramic materials in various parts of the total engine system, and the study of system optimization. The basic assumptions and the mathematical relationships used in the simulation of the model engine are described
Simulation of Hydrogen Generation from Methane Partial Oxidation in a Plasma Fuel Reformer
A model for the chemistry in a plasma fuel reformer or plasmatron has been developed. The plasma fuel reformer is set up to produce syngas (hydrogen and carbon monoxide gas mixture) from partial oxidation of hydrocarbons. The behavior of methane as fuel has been investigated to characterize and simulate the plasmatron performance. The goal of this work has been improved understanding of the physical/chemical processes within the reactor. The simulation tool used was CHEMKIN 3.7, using the GRI methane combustion mechanism. The Partially Stirred Reactor application (PASR) simulates random mixing by a frequency mixing parameter, which is directly dependant of the system fluid dynamic properties. The fuel reformer was designed as a reactor where combustion is initiated by an electric discharge due to ohmic heating of the arc region. From discharge observations, energy estimations and model simulations, it was found that the electric arc initiates combustion by locally raising the temperature and then propagating the reaction by heat and mass transfer/mixing to the surroundings. Simulation results demonstrated that there is an optimum characteristic mixing time for each residence time, depending on the initial temperature reached at the arc. It was also found that for given power input into the system, the more spread the energy is, or the more mass is heated to a moderate temperature, the better the calculated performance
A computer simulation of the turbocharged turbo compounded diesel engine system: A description of the thermodynamic and heat transfer models
A computer simulation of the turbocharged turbocompounded direct-injection diesel engine system was developed in order to study the performance characteristics of the total system as major design parameters and materials are varied. Quasi-steady flow models of the compressor, turbines, manifolds, intercooler, and ducting are coupled with a multicylinder reciprocator diesel model, where each cylinder undergoes the same thermodynamic cycle. The master cylinder model describes the reciprocator intake, compression, combustion and exhaust processes in sufficient detail to define the mass and energy transfers in each subsystem of the total engine system. Appropriate thermal loading models relate the heat flow through critical system components to material properties and design details. From this information, the simulation predicts the performance gains, and assesses the system design trade-offs which would result from the introduction of selected heat transfer reduction materials in key system components, over a range of operating conditions
Further Observations of the Intermediate Mass Black Hole Candidate ESO 243-49 HLX-1
The brightest Ultra-Luminous X-ray source HLX-1 in the galaxy ESO 243-49
currently provides strong evidence for the existence of intermediate mass black
holes. Here we present the latest multi-wavelength results on this intriguing
source in X-ray, UV and radio bands. We have refined the X-ray position to
sub-arcsecond accuracy. We also report the detection of UV emission that could
indicate ongoing star formation in the region around HLX-1. The lack of
detectable radio emission at the X-ray position strengthens the argument
against a background AGN.Comment: 4 pages, 2 figures. Accepted 11th of Feb 2010. Contributed talk to
appear in Proceedings of "X-ray Astronomy 2009: Present Status,
Multi-Wavelength Approach and Future Perspectives", Bologna, Italy, September
7-11, 2009, AIP, eds. A. Comastri, M. Cappi, and L. Angelin
Evaluation of the Thermal NO formation mechanism under low-temperature diesel combustion conditions
Over the past two decades, the amount of exhaust gas pollutants emissions has been significantly reduced due to the
severe emission legislation imposed in most countries worldwide. Initial strategies simply required the employment of
simple after-treatment and engine control devices; however, as the restrictions become more stringent, these strategies
are evolving in the development of different combustion modes, specially characterized by having low-temperature combustion
characteristics. These new working conditions demand the need to check the suitability of the current NO predictive
models that coexist nowadays under standard diesel combustion characteristics, paying closer attention to the
Thermal mechanism. In order to do so, a common chemical-kinetic software was employed to simulate, for n-heptane
and methane fuels, fixed local conditions (standard diesel and low-temperature combustion) described by constant pressure,
relative mixture fraction, oxygen mass fraction and initial and final reaction temperature. The study reflects a common
trend between all the studied cases, independently of the considered local conditions, making it applicable to more
complex situations such as real NO formation processes in diesel sprays. This relationship was characterized by a
fourth-degree polynomial equation capable of substantially improving the NO prediction by just using the Thermal NO
predictive model.The authors thank the Ministerio de Ciencia e Innovacion of the Spanish government for contributing to this work with the grant BES-2009-021897.Desantes Fernández, JM.; López, JJ.; Redón Lurbe, P.; Arregle, JJP. (2012). Evaluation of the Thermal NO formation mechanism under low-temperature diesel combustion conditions. International Journal of Engine Research. 13(6):531-539. https://doi.org/10.1177/1468087411429638S53153913
- …