Magnetic Boron Nitride Nanoribbons with Tunable Electronic Properties

We present theoretical evidence, based on total-energy first-principles calculations, of the existence of spin-polarized states well localized at and extended along the edges of bare zigzag boron nitride nanoribbons. Our calculations predict that all the magnetic configurations studied in this work are thermally accessible at room temperature and present an energy gap. In particular, we show that the high spin state, with a magnetic moment of 1 $\mu_B$ at each edge atom, presents a rich spectrum of electronic behaviors as it can be controlled by applying an external electric field in order to obtain metallic $\leftrightarrow$ semiconducting $\leftrightarrow$ half-metallic transitions.Comment: 12 pages, 5 figures, 2 table

"Narrow" Graphene Nanoribbons Made Easier by Partial Hydrogenation

It is a challenge to synthesize graphene nanoribbons (GNRs) with narrow widths and smooth edges in large scale. Our first principles study on the hydrogenation of GNRs shows that the hydrogenation starts from the edges of GNRs and proceeds gradually toward the middle of the GNRs so as to maximize the number of carbon-carbon $\pi$-$\pi$ bonds. Furthermore, the partially hydrogenated wide GNRs have similar electronic and magnetic properties as those of narrow GNRs. Therefore, it is not necessary to directly produce narrow GNRs for realistic applications because partial hydrogenation could make wide GNRs "narrower"

Screening of suitable cationic dopants for solar absorber material CZTS/Se: A first principles study

The earth abundant and non-toxic solar absorber material kesterite Cu2ZnSn(S/Se)(4) has been studied to achieve high power conversion efficiency beyond various limitations, such as secondary phases, antisite defects, band gap adjustment and microstructure. To alleviate these hurdles, we employed screening based approach to find suitable cationic dopant that can promote the current density and the theoretical maximum upper limit of the energy conversion efficiency (P(%)) of CZTS/Se solar devices. For this task, the hybrid functional (Heyd, Scuseria and Ernzerhof, HSE06) were used to study the electronic and optical properties of cation (Al, Sb, Ga, Ba) doped CZTS/Se. Our in-depth investigation reveals that the Sb atom is suitable dopant of CZTS/CZTSe and also it has comparable bulk modulus as of pure material. The optical absorption coefficient of Sb doped CZTS/Se is considerably larger than the pure materials because of easy formation of visible range exciton due to the presence of defect state below the Fermi level, which leads to an increase in the current density and P(%). Our results demonstrate that the lower formation energy, preferable energy gap and excellent optical absorption of the Sb doped CZTS/Se make it potential component for relatively high efficient solar cells

Electromechanical properties of suspended Graphene Nanoribbons

Graphene nanoribbons present diverse electronic properties ranging from semiconducting to half-metallic, depending on their geometry, dimensions and chemical composition. Here we present a route to control these properties via externally applied mechanical deformations. Using state-of-the-art density functional theory calculations combined with classical elasticity theory considerations, we find a remarkable Young's modulus value of ~7 TPa for ultra-narrow graphene strips and a pronounced electromechanical response towards bending and torsional deformations. Given the current advances in the synthesis of nanoscale graphene derivatives, our predictions can be experimentally verified opening the way to the design and fabrication of miniature electromechanical sensors and devices based on ultra-narrow graphene nanoribbons.Comment: 12 pages, 6 figure

Quasiparticle interfacial level alignment of highly hybridized frontier levels: H2_2O on TiO2_2(110)

Knowledge of the frontier levels' alignment prior to photo-irradiation is necessary to achieve a complete quantitative description of H$_2$O photocatalysis on TiO$_2$(110). Although H$_2$O on rutile TiO$_2$(110) has been thoroughly studied both experimentally and theoretically, a quantitative value for the energy of the highest H$_2$O occupied levels is still lacking. For experiment, this is due to the H$_2$O levels being obscured by hybridization with TiO$_2$(110) levels in the difference spectra obtained via ultraviolet photoemission spectroscopy (UPS). For theory, this is due to inherent difficulties in properly describing many-body effects at the H$_2$O-TiO$_2$(110) interface. Using the projected density of states (DOS) from state-of-the-art quasiparticle (QP) $G_0W_0$, we disentangle the adsorbate and surface contributions to the complex UPS spectra of H$_2$O on TiO$_2$(110). We perform this separation as a function of H$_2$O coverage and dissociation on stoichiometric and reduced surfaces. Due to hybridization with the TiO$_2$(110) surface, the H$_2$O 3a$_1$ and 1b$_1$ levels are broadened into several peaks between 5 and 1 eV below the TiO$_2$(110) valence band maximum (VBM). These peaks have both intermolecular and interfacial bonding and antibonding character. We find the highest occupied levels of H$_2$O adsorbed intact and dissociated on stoichiometric TiO$_2$(110) are 1.1 and 0.9 eV below the VBM. We also find a similar energy of 1.1 eV for the highest occupied levels of H$_2$O when adsorbed dissociatively on a bridging O vacancy of the reduced surface. In both cases, these energies are significantly higher (by 0.6 to 2.6 eV) than those estimated from UPS difference spectra, which are inconclusive in this energy region. Finally, we apply self-consistent QP$GW$ (scQP$GW$1) to obtain the ionization potential of the H$_2$O-TiO$_2$(110) interface.Comment: 12 pages, 12 figures, 1 tabl

Electronic Properties of Vinylene-Linked Heterocyclic Conducting Polymers: Predictive Design and Rational Guidance from DFT Calculations

The band structure and electronic properties in a series of vinylene-linked heterocyclic conducting polymers are investigated using density functional theory (DFT). In order to accurately calculate electronic band gaps, we utilize hybrid functionals with fully periodic boundary conditions to understand the effect of chemical functionalization on the electronic structure of these materials. The use of predictive first-principles calculations coupled with simple chemical arguments highlights the critical role that aromaticity plays in obtaining a low band gap polymer. Contrary to some approaches which erroneously attempt to lower the band gap by increasing the aromaticity of the polymer backbone, we show that being aromatic (or quinoidal) in itself does not insure a low band gap. Rather, an iterative approach which destabilizes the ground state of the parent polymer towards the aromatic \leftrightarrow quinoidal level-crossing on the potential energy surface is a more effective way of lowering the band gap in these conjugated systems. Our results highlight the use of predictive calculations guided by rational chemical intuition for designing low band gap polymers in photovoltaic materials.Comment: Accepted by the Journal of Physical Chemistry

Tunable stress and controlled thickness modification in graphene by annealing

Graphene has many unique properties which make it an attractive material for fundamental study as well as for potential applications. In this paper, we report the first experimental study of process-induced defects and stress in graphene using Raman spectroscopy and imaging. While defects lead to the observation of defect-related Raman bands, stress causes shift in phonon frequency. A compressive stress (as high as 2.1 GPa) was induced in graphene by depositing a 5 nm SiO2 followed by annealing, whereas a tensile stress (~ 0.7 GPa) was obtained by depositing a thin silicon capping layer. In the former case, both the magnitude of the compressive stress and number of graphene layers can be controlled or modified by the annealing temperature. As both the stress and thickness affect the physical properties of graphene, this study may open up the possibility of utilizing thickness and stress engineering to improve the performance of graphene-based devices. Local heating techniques may be used to either induce the stress or reduce the thickness selectively.Comment: 19 pages, 7 figures, accepted by ACS nan

Advances in ab-initio theory of Multiferroics. Materials and mechanisms: modelling and understanding

Within the broad class of multiferroics (compounds showing a coexistence of magnetism and ferroelectricity), we focus on the subclass of "improper electronic ferroelectrics", i.e. correlated materials where electronic degrees of freedom (such as spin, charge or orbital) drive ferroelectricity. In particular, in spin-induced ferroelectrics, there is not only a {\em coexistence} of the two intriguing magnetic and dipolar orders; rather, there is such an intimate link that one drives the other, suggesting a giant magnetoelectric coupling. Via first-principles approaches based on density functional theory, we review the microscopic mechanisms at the basis of multiferroicity in several compounds, ranging from transition metal oxides to organic multiferroics (MFs) to organic-inorganic hybrids (i.e. metal-organic frameworks, MOFs)Comment: 22 pages, 9 figure

Platinum Integrated Graphene for Methanol Fuel Cells

Uniform and porous graphene nanoflake films (GNFs) have been investigated as a support for catalytic Pt nanoclusters in direct methanol electro-oxidation. Pt nanoclusters of varying thickness are deposited on GNFs using magnetron sputtering, and their effects on the electrocatalytic activity for oxidizing methanol are systemically studied. GNF supported Pt nanoclusters with ultralow catalyst loading exhibit high performance for methanol electrocatalytic oxidation with a large mass-specific peak current density and a ratio of forward to backward peak currents up to 1.4. These characteristics compare favorably to the majority of Pt−C based electrodes, except for those of carbon nanotubes with Pt decoration on both the inner and the outer wall surfaces. The results obtained are ascribed to a highly coupled network made of high-density 2−4 nm Pt monolayer nanoclusters on both the basal and edge planes of each nanoflakes of graphene. GNFs are a promising support material for developing next-generation advanced Pt based fuel cells and their relevant electrodes in the field of energy