A model for film-forming with Newtonian and shear-thinning fluids

The formation of a thin film by (i) the slow penetration of a gas bubble into a liquid filled tube, (ii) the withdrawal of a planar substrate from a liquid filled gap, is investigated theoretically for the cases of both Newtonian and shear-thinning liquids; the latter conforming to either a power-law or Ellis model. Formulated as a boundary value problem underpinned by lubrication theory, the analysis gives rise to a system of ordinary differential equations which are solved numerically subject to appropriate boundary conditions. For Newtonian liquids comparison of the predicted residual film thickness for a wide range of capillary number, Ca ∈ (10-4, 10), is made with others obtained using existing expressions, including the classical one of Bretherton, in the region of parameter space over which they apply. In the case of (i), prediction of the behaviour of the residual fluid fraction and gap-to-film thickness ratio, for a Newtonian liquid and one that is shear-thinning and modelled via a power-law, is found to be in particularly good agreement with experimental data for Ca < 0.2. For (ii), both shear-thinning models are utilized and contour plots of residual film thickness generated as a function of Ca and the defining parameters characteristic of each model. © 2009 Elsevier B.V. All rights reserved

Dynamics of transversally vibrating non-prismatic Timoshenko cantilever beams

TurkAz Enerji Lt

A porohyperelastic lubrication model for articular cartilage in the natural synovial joint

This work focuses on the proposed mechanisms for the lubrication of synovial joints and applies them to an idealised bearing geometry considering a porohyperelastic material (cartilage) rotating against a stationary rigid impermeable surface. The model captures the behaviour of all lubrication regimes including fluid film formation and boundary contact as the load capacity is increased, representing a major advancement in modelling cartilage mechanics. Transient responses in the fluid phase are shown to be faster than those in the solid phase with the former decaying over time as fluid is exuded from the material. The complex behaviour of fluid migrating to and from the lubricating film is captured which leads to a better understanding of the hydration and friction mechanisms observed

Internal twist drill coolant channel modelling using computational fluid dynamics

Coolant technologies have become increasingly used within twist-drill machining. Internal helical coolant channels are a common means of delivering high-pressure coolant directly to the cutting edge to increase the transfer of heat away from the cutting edge and to aid with chip evacuation. However, the complex behaviour of Coriolis and centrifugal forces generated by large angular velocities and the curvature of the coiled channel govern the highly turbulent flow of coolant. This research uses Computational Fluid Dynamics (CFD) to study the design of internal coolant channels across the internal section of the drill bit

Fabrication of cartilage-inspired hydrogel/entangled polymer–elastomer structures possessing poro-elastic properties

The ability to replicate the load-bearing properties of articular cartilage is attractive for many engineering applications, particularly bearings where low friction, low wear, and high durability are required. Hydrogels are widely used materials spanning many diverse applications owing to their lubricity and unique mechanical/chemical properties. The poor mechanical characteristics of conventional hydrogels, especially their compressive behavior, limit their application in load-bearing applications despite their favorable properties such as poro/viscoelasticity and lubricity. This paper demonstrates a cartilage-inspired approach to produce a structure that benefits from water-swelling resistant and ultrafast recovery behavior of elastomers as well as the stress-relaxation and energy dissipation properties of hydrogels. A method is presented in this work to fabricate interconnected macro-porous elastomers based on sintering poly(methyl methacrylate) beads. The porous elastomer imparted structural support and resilience to its composite with an infused-grafted hydrogel. At 30% strain and depending upon the strain rate, the composite exhibited a load-bearing behavior that was 14–19 times greater than that of pristine hydrogel and approximately 3 times greater than that of the porous elastomer. The equilibrium elastic modulus of the composite was 452 kPa at a strain range of 10%–30%, which was close to the values reported for the modulus of cartilage tested with similar experimental parameters defined in this study. The dissipated energy for the composite at strain rates of 1 and 10–3 s–1 was enhanced by 25-, 25-, 5-, and 15-fold as compared to that for the pristine hydrogel and the porous elastomer, respectively. The cyclic loading tests at two strain rates showed that the composite immediately recovers its load-bearing properties with the maximum load recovery staying above 95% of its initial values throughout the testing. The permeability of the structures was measured experimentally, and the results showed a decrease of permeability by 3 orders of magnitude following hydrogel grafting

Aerodynamic Drag Reduction of Emergency Response Vehicles

This paper presents the first experimental and computational investigation into the aerodynamics of emergency response vehicles and focusses on reducing the additional drag that results from the customary practice of adding light-bars onto the vehicles’ roofs. A series of wind tunnel experiments demonstrate the significant increase in drag that results from the light bars and show these can be minimized by reducing the flow separation caused by them. Simple potential improvements in the aerodynamic design of the light bars are investigated by combining Computational Fluid Dynamics (CFD) with Design of Experiments and metamodelling methods. An aerofoil-based roof design concept is shown to reduce the overall aerodynamic drag by up to 20% and an analysis of its effect on overall fuel consumption indicates that it offers a significant opportunity for improving the fuel economy and reducing emissions from emergency response vehicles. These benefits are now being realised by the UK’s ambulance service

A multiscale method for optimising surface topography in elastohydrodynamic lubrication (EHL) using metamodels

The frictional performance of a bearing is of significant interest in any mechanical system where there are lubricated surfaces under load and in relative motion. Surface topography plays a major role in determining the coefficient of friction for the bearing because the size of the fluid film and topography are of a comparable order. The problem of optimising topography for such a system is complicated by the separation in scales between the size of the lubricated domain and that of the topography, which is of at least one order of magnitude or more smaller. This paper introduces a multiscale method for optimising the small scale topography for improved frictional performance of the large scale bearing. The approach fully couples the elastohydrodynamic lubrication at both scales between pressure generated in the lubricant and deformation of the bounding surfaces. Homogenised small scale data is used to inform the large scale model and is represented using Moving Least Squares metamodels calibrated by cross validation. An optimal topography for a minimum coefficient of friction for the bearing is identified and comparisons made of local minima in the response, where very different topographies with similar frictional performance are observed. Comparisons of the optimal topography with the smooth surface model demonstrated the complexity of capturing the non-linear effect of topography and the necessity of the multiscale method in capturing this. Deviations from the smooth surface model were quantified by the metamodel coefficients and showed how topographies with a similar frictional performance have very different characteristics

Integrated metatranscriptomic and metagenomic analyses of stratified microbial assemblages in the open ocean

As part of an ongoing survey of microbial community gene expression in the ocean, we sequenced and compared ~38 Mbp of community transcriptomes and ~157 Mbp of community genomes from four bacterioplankton samples, along a defined depth profile at Station ALOHA in North Pacific subtropical gyre (NPSG). Taxonomic analysis suggested that the samples were dominated by three taxa: Prochlorales, Consistiales and Cenarchaeales, which comprised 36–69% and 29–63% of the annotated sequences in the four DNA and four cDNA libraries, respectively. The relative abundance of these taxonomic groups was sometimes very different in the DNA and cDNA libraries, suggesting differential relative transcriptional activities per cell. For example, the 125 m sample genomic library was dominated by Pelagibacter (~36% of sequence reads), which contributed fewer sequences to the community transcriptome (~11%). Functional characterization of highly expressed genes suggested taxon-specific contributions to specific biogeochemical processes. Examples included Roseobacter relatives involved in aerobic anoxygenic phototrophy at 75 m, and an unexpected contribution of low abundance Crenarchaea to ammonia oxidation at 125 m. Read recruitment using reference microbial genomes indicated depth-specific partitioning of coexisting microbial populations, highlighted by a transcriptionally active high-light-like Prochlorococcus population in the bottom of the photic zone. Additionally, nutrient-uptake genes dominated Pelagibacter transcripts, with apparent enrichment for certain transporter types (for example, the C4-dicarboxylate transport system) over others (for example, phosphate transporters). In total, the data support the utility of coupled DNA and cDNA analyses for describing taxonomic and functional attributes of microbial communities in their natural habitats.Gordon and Betty Moore FoundationUnited States. Dept. of EnergyNational Science Foundation (U.S.) (Science and Technology Center Award EF0424599

Phylodynamics and movement of Phycodnaviruses among aquatic environments

Phycodnaviruses have a significant role in modulating the dynamics of phytoplankton, thereby influencing community structure and succession, nutrient cycles and potentially atmospheric composition because phytoplankton fix about half the carbon dioxide (CO2) on the planet, and some algae release dimethylsulphoniopropionate when lysed by viruses. Despite their ecological importance and widespread distribution, relatively little is known about the evolutionary history, phylogenetic relationships and phylodynamics of the Phycodnaviruses from freshwater environments. Herein we provide novel data on Phycodnaviruses from the largest river system on earth—the Amazon Basin—that were compared with samples from different aquatic systems from several places around the world. Based on phylogenetic inference using DNA polymerase (pol) sequences we show the presence of distinct populations of Phycodnaviridae. Preliminary coarse-grained phylodynamics and phylogeographic inferences revealed a complex dynamics characterized by long-term fluctuations in viral population sizes, with a remarkable worldwide reduction of the effective population around 400 thousand years before the present (KYBP), followed by a recovery near to the present time. Moreover, we present evidence for significant viral gene flow between freshwater environments, but crucially almost none between freshwater and marine environments

High-Resolution Melting Analysis as a Powerful Tool to Discriminate and Genotype Pseudomonas savastanoi Pathovars and Strains

Pseudomonas savastanoi is a serious pathogen of Olive, Oleander, Ash, and several other Oleaceae. Its epiphytic or endophytic presence in asymptomatic plants is crucial for the spread of Olive and Oleander knot disease, as already ascertained for P. savastanoi pv. savastanoi (Psv) on Olive and for pv. nerii (Psn) on Oleander, while no information is available for pv. fraxini (Psf) on Ash. Nothing is known yet about the distribution on the different host plants and the real host range of these pathovars in nature, although cross-infections were observed following artificial inoculations. A multiplex Real-Time PCR assay was recently developed to simultaneously and quantitatively discriminate in vitro and in planta these P. savastanoi pathovars, for routine culture confirmation and for epidemiological and diagnostical studies. Here an innovative High-Resolution Melting Analysis (HRMA)-based assay was set up to unequivocally discriminate Psv, Psn and Psf, according to several single nucleotide polymorphisms found in their Type Three Secretion System clusters. The genetic distances among 56 P. savastanoi strains belonging to these pathovars were also evaluated, confirming and refining data previously obtained by fAFLP. To our knowledge, this is the first time that HRMA is applied to a bacterial plant pathogen, and one of the few multiplex HRMA-based assays developed so far. This protocol provides a rapid, sensitive, specific tool to differentiate and detect Psv, Psn and Psf strains, also in vivo and against other related bacteria, with lower costs than conventional multiplex Real-Time PCR. Its application is particularly suitable for sanitary certification programs for P. savastanoi, aimed at avoiding the spreading of this phytopathogen through asymptomatic plants