260 research outputs found
Doping dependence of the superconducting gap in Bi2Sr2CaCu2O{8 + delta}
Bi2Sr2CaCu2O{8 + \delta} crystals with varying hole concentrations (0.12 < p
< 0.23) were studied to investigate the effects of doping on the symmetry and
magnitude of the superconducting gap. Electronic Raman scattering experiments
that sample regions of the Fermi surface near the diagonal (B_{2g}) and
principal axes (B_{1g}) of the Brillouin Zone have been utilized. The frequency
dependence of the Raman response function at low energies is found to be linear
for B_{2g} and cubic for B_{1g} (T< T_c). The latter observations have led us
to conclude that the doping dependence of the superconducting gap is consistent
with d_{x^2-y^2} symmetry, for slightly underdoped and overdoped crystals.
Studies of the pair-breaking peak found in the B_{1g} spectra demonstrate that
the magnitude of the maximum gap decreases monotonically with increasing hole
doping, for p > 0.12. Based on the magnitude of the B_{1g} renormalization, it
is found that the number of quasiparticles participating in pairing increases
monotonically with increased doping. On the other hand, the B_{2g} spectra show
a weak "pair-breaking peak" that follows a parabolic-like dependence on hole
concentration, for 0.12 < p < 0.23.Comment: 9 pages REvTex document including 8 eps figures; new table II;
changes to Fig. 5 and tex
Contamination in trials of educational interventions
Objectives: To consider the effects of contamination on the magnitude and statistical significance (or precision) of the estimated effect of an educational intervention, to investigate the mechanisms of contamination, and to consider how contamination can be avoided. Data sources: Major electronic databases were searched up to May 2005. Methods: An exploratory literature search was conducted. The results of trials included in previous relevant systematic reviews were then analysed to see whether studies that avoided contamination resulted in larger effect estimates than those that did not. Expertsâ opinions were elicited about factors more or less likely to lead to contamination. We simulated contamination processes to compare contamination biases between cluster and individually randomised trials. Statistical adjustment was made for contamination using Complier Average Causal Effect analytic methods, using published and simulated data. The bias and power of cluster and individually randomised trials were compared, as were Complier Average Causal Effect, intention-to-treat and per protocol methods of analysis. Results: Few relevant studies quantified contamination. Experts largely agreed on where contamination was more or less likely. Simulation of contamination processes showed that, with various combinations of timing, intensity and baseline dependence of contamination, cluster randomised trials might produce biases greater than or similar to those of individually randomised trials. Complier Average Causal Effect analyses produced results that were less biased than intention-to-treat or per protocol analyses. They also showed that individually randomised trials would in most situations be more powerful than cluster randomised trials despite contamination. Conclusions: The probability, nature and process of contamination should be considered when designing and analysing controlled trials of educational interventions in health. Cluster randomisation may or may not be appropriate and should not be uncritically assumed always to be a solution. Complier Average Causal Effect models are an appropriate way to adjust for contamination if it can be measured. When conducting such trials in future, it is a priority to report the extent, nature and effects of contamination.We are grateful to the National Health Service Research and Development National Coordinating Centre for Research Methodology for funding this research
Distributed automated manufacturing of pluripotent stem cell products
Establishing how to effectively manufacture cell therapies is an industry-level problem. Decentralised manufacturing is of increasing importance, and its challenges are recognised by healthcare regulators with deviations and comparability issues receiving specific attention from them. This paper is the first to report the deviations and other risks encountered when implementing the expansion of human pluripotent stem cells (hPSCs) in an automated three international siteâdecentralised manufacturing setting. An experimental demonstrator project expanded a human embryonal carcinoma cell line (2102Ep) at three development sites in France, Germany and the UK using the CompacT SelecT (Sartorius Stedim, Royston, UK) automated cell culture platform. Anticipated variations between sites spanned material input, features of the process itself and production system details including different quality management systems and personnel. Where possible, these were pre-addressed by implementing strategies including standardisation, cell bank mycoplasma testing and specific engineering and process improvements. However, despite such measures, unexpected deviations occurred between sites including software incompatibility and machine/process errors together with uncharacteristic contaminations. Many only became apparent during process proving or during the process run. Further, parameters including growth rate and viability discrepancies could only be determined post-run, preventing âliveâ corrective measures. The work confirms the critical nature of approaches usually taken in Good Manufacturing Practice (GMP) manufacturing settings and especially emphasises the requirement for monitoring steps to be included within the production system. Real-time process monitoring coupled with carefully structured quality systems is essential for multiple site working including clarity of decision-making roles. Additionally, an over-reliance upon post-process visual microscopic comparisons has major limitations; it is difficult for non-experts to detect deleterious culture changes and such detection is slow
Using the past to constrain the future: how the palaeorecord can improve estimates of global warming
Climate sensitivity is defined as the change in global mean equilibrium
temperature after a doubling of atmospheric CO2 concentration and provides a
simple measure of global warming. An early estimate of climate sensitivity,
1.5-4.5{\deg}C, has changed little subsequently, including the latest
assessment by the Intergovernmental Panel on Climate Change.
The persistence of such large uncertainties in this simple measure casts
doubt on our understanding of the mechanisms of climate change and our ability
to predict the response of the climate system to future perturbations. This has
motivated continued attempts to constrain the range with climate data, alone or
in conjunction with models. The majority of studies use data from the
instrumental period (post-1850) but recent work has made use of information
about the large climate changes experienced in the geological past.
In this review, we first outline approaches that estimate climate sensitivity
using instrumental climate observations and then summarise attempts to use the
record of climate change on geological timescales. We examine the limitations
of these studies and suggest ways in which the power of the palaeoclimate
record could be better used to reduce uncertainties in our predictions of
climate sensitivity.Comment: The final, definitive version of this paper has been published in
Progress in Physical Geography, 31(5), 2007 by SAGE Publications Ltd, All
rights reserved. \c{opyright} 2007 Edwards, Crucifix and Harriso
Gravitational Lensing at Millimeter Wavelengths
With today's millimeter and submillimeter instruments observers use
gravitational lensing mostly as a tool to boost the sensitivity when observing
distant objects. This is evident through the dominance of gravitationally
lensed objects among those detected in CO rotational lines at z>1. It is also
evident in the use of lensing magnification by galaxy clusters in order to
reach faint submm/mm continuum sources. There are, however, a few cases where
millimeter lines have been directly involved in understanding lensing
configurations. Future mm/submm instruments, such as the ALMA interferometer,
will have both the sensitivity and the angular resolution to allow detailed
observations of gravitational lenses. The almost constant sensitivity to dust
emission over the redshift range z=1-10 means that the likelihood for strong
lensing of dust continuum sources is much higher than for optically selected
sources. A large number of new strong lenses are therefore likely to be
discovered with ALMA, allowing a direct assessment of cosmological parameters
through lens statistics. Combined with an angular resolution <0.1", ALMA will
also be efficient for probing the gravitational potential of galaxy clusters,
where we will be able to study both the sources and the lenses themselves, free
of obscuration and extinction corrections, derive rotation curves for the
lenses, their orientation and, thus, greatly constrain lens models.Comment: 69 pages, Review on quasar lensing. Part of a LNP Topical Volume on
"Dark matter and gravitational lensing", eds. F. Courbin, D. Minniti. To be
published by Springer-Verlag 2002. Paper with full resolution figures can be
found at ftp://oden.oso.chalmers.se/pub/tommy/mmviews.ps.g
Can occupational therapist-led home environmental assessment prevent falls in older people? A modified cohort randomised controlled trial protocol
INTRODUCTION: Falls and fall-related injuries are a serious cause of morbidity and cost to society. Environmental hazards are implicated as a major contributor to falls among older people. A recent Cochrane review found an environmental assessment, undertaken by an occupational therapist, to be an effective approach to reducing falls. However, none of the trials included a cost-effectiveness evaluation in the UK setting. This protocol describes a large multicentre trial investigating the clinical and cost-effectiveness of environmental assessment and modification within the home with the aim of preventing falls in older people. METHODS AND ANALYSIS: A two-arm, modified cohort randomised controlled trial, conducted within England, with 1299 community-dwelling participants aged 65 years and above, who are at an increased risk of falls. Participants will be randomised 2:1 to receive either usual care or home assessment and modification. The primary outcome is rate of falls (falls/person/time) over 12 months assessed by monthly patient self-report falls calendars. Secondary self-reported outcome measures include: the proportion of single and multiple fallers, time to first fall over a 12-month period, quality of life (EuroQoL EQ-5D-5L) and health service utilisation at 4, 8 and 12 months. A nested qualitative study will examine the feasibility of providing the intervention and explore barriers, facilitators, workload implications and readiness to employ these interventions into routine practice. An economic evaluation will assess value for money in terms of cost per fall averted. ETHICS AND DISSEMINATION: This study protocol (including the original application and subsequent amendments) received a favourable ethical opinion from National Health Service West of Scotland REC 3. The trial results will be published in peer-reviewed journals and at conference presentations. A summary of the findings will be sent to participants. TRIAL REGISTRATION NUMBER: ISRCTN22202133; Pre-results
Comparison of pharmacopeial statistical methods applied in microbiological assay for antibiotics potency determination using parallel lines and three-dose level
Systems genetics identifies a role for Cacna2d1 regulation in elevated intraocular pressure and glaucoma susceptibility
Glaucoma is a multi-factorial blinding disease in which genetic factors play an important role. Elevated intraocular pressure is a highly heritable risk factor for primary open angle glaucoma and currently the only target for glaucoma therapy. Our study helps to better understand underlying genetic and molecular mechanisms that regulate intraocular pressure, and identifies a new candidate gene, Cacna2d1, that modulates intraocular pressure and a promising therapeutic, pregabalin, which binds to CACNA2D1 protein and lowers intraocular pressure significantly. Because our study utilizes a genetically diverse population of mice with kno
Protocol for the TRANSLATE prospective, multicentre, randomised clinical trial of prostate biopsy technique
OBJECTIVES: Primary objectives: to determine whether local anaesthetic transperineal prostate (LATP) biopsy improves the detection of clinically significant prostate cancer (csPCa), defined as International Society of Urological Pathology (ISUP) Grade Group â„2 disease (i.e., any Gleason pattern 4 disease), compared to transrectal ultrasound-guided (TRUS) prostate biopsy, in biopsy-naĂŻve men undergoing biopsy based on suspicion of csPCa. SECONDARY OBJECTIVES: to compare (i) infection rates, (ii) health-related quality of life, (iii) patient-reported procedure tolerability, (iv) patient-reported biopsy-related complications (including bleeding, bruising, pain, loss of erectile function), (v) number of subsequent prostate biopsy procedures required, (vi) cost-effectiveness, (vii) other histological parameters, and (viii) burden and rate of detection of clinically insignificant PCa (ISUP Grade Group 1 disease) in men undergoing these two types of prostate biopsy. PATIENTS AND METHODS: The TRANSLATE trial is a UK-wide, multicentre, randomised clinical trial that meets the criteria for level-one evidence in diagnostic test evaluation. TRANSLATE is investigating whether LATP biopsy leads to a higher rate of detection of csPCa compared to TRUS prostate biopsy. Both biopsies are being performed with an average of 12 systematic cores in six sectors (depending on prostate size), plus three to five target cores per multiparametric/bi-parametric magnetic resonance imaging lesion. LATP biopsy is performed using an ultrasound probe-mounted needle-guidance device (either the 'Precision-Point' or BK UA1232 system). TRUS biopsy is performed according to each hospital's standard practice. The study is 90% powered to detect a 10% difference (LATP biopsy hypothesised at 55% detection rate for csPCa vs 45% for TRUS biopsy). A total of 1042 biopsy-naĂŻve men referred with suspected PCa need to be recruited. CONCLUSIONS: This trial will provide robust prospective data to determine the diagnostic ability of LATP biopsy vs TRUS biopsy in the primary diagnostic setting
DEVELOPMENT of the MODEL of GALACTIC INTERSTELLAR EMISSION for STANDARD POINT-SOURCE ANALYSIS of FERMI LARGE AREA TELESCOPE DATA
Most of the celestial \u3b3 rays detected by the Large Area Telescope (LAT) on board the Fermi Gamma-ray Space Telescope originate from the interstellar medium when energetic cosmic rays interact with interstellar nucleons and photons. Conventional point-source and extended-source studies rely on the modeling of this diffuse emission for accurate characterization. Here, we describe the development of the Galactic Interstellar Emission Model (GIEM), which is the standard adopted by the LAT Collaboration and is publicly available. This model is based on a linear combination of maps for interstellar gas column density in Galactocentric annuli and for the inverse-Compton emission produced in the Galaxy. In the GIEM, we also include large-scale structures like Loop I and the Fermi bubbles. The measured gas emissivity spectra confirm that the cosmic-ray proton density decreases with Galactocentric distance beyond 5 kpc from the Galactic Center. The measurements also suggest a softening of the proton spectrum with Galactocentric distance. We observe that the Fermi bubbles have boundaries with a shape similar to a catenary at latitudes below 20\ub0 and we observe an enhanced emission toward their base extending in the north and south Galactic directions and located within \u2dc4\ub0 of the Galactic Center
- âŠ