Ultrasound velocimetry in a shear-thickening wormlike micellar solution: Evidence for the coexistence of radial and vorticity shear bands

Abstract.: We carried out pointwise local velocity measurements on 40mM cetylpyridinium chloride-sodium salicylate (CPyCl-NaSal) wormlike micellar solution using high-frequency ultrasound velocimetry in a Couette shear cell. The studied wormlike solution exhibits Newtonian, shear-thinning and shear-thickening rheological behavior in a stress-controlled environment. Previous rheology, flow visualization and small-angle light/neutron scattering experiments in the shear-thickening regime of this system showed the presence of stress-driven alternating transparent and turbid rings or vorticity bands along the axis of the Couette geometry. Through local velocity measurements we observe a homogeneous flow inside the 1mm gap of the Couette cell in the shear-thinning (stress-plateau) region. Only when the solution is sheared beyond the critical shear stress (shear-thickening regime) in a stress-controlled experiment, we observe inhomogeneous flow characterized by radial or velocity gradient shear bands with a highly sheared band near the rotor and a weakly sheared band near the stator of the Couette geometry. Furthermore, fast measurements performed in the shear-thickening regime to capture the temporal evolution of local velocities indicate coexistence of both radial and vorticity shear bands. However the same measurements carried out in shear rate controlled mode of the rheometer do not show such rheological complexit

Magnetic stress as a driving force of structural distortions: the case of CrN

We show that the observed transition from rocksalt to orthorhombic P$_{nma}$ symmetry in CrN can be understood in terms of stress anisotropy. Using local spin density functional theory, we find that the imbalance between stress stored in spin-paired and spin-unpaired Cr nearest neighbors causes the rocksalt structure to be unstable against distortions and justifies the observed antiferromagnetic ordering. This stress has a purely magnetic origin, and may be important in any system where the coupling between spin ordering and structure is strong.Comment: 4 pages (two columns) 4 figure

Internet of things

Manual of Digital Earth / Editors: Huadong Guo, Michael F. Goodchild, Alessandro Annoni .- Springer, 2020 .- ISBN: 978-981-32-9915-3Digital Earth was born with the aim of replicating the real world within the digital world. Many efforts have been made to observe and sense the Earth, both from space (remote sensing) and by using in situ sensors. Focusing on the latter, advances in Digital Earth have established vital bridges to exploit these sensors and their networks by taking location as a key element. The current era of connectivity envisions that everything is connected to everything. The concept of the Internet of Things(IoT)emergedasaholisticproposaltoenableanecosystemofvaried,heterogeneous networked objects and devices to speak to and interact with each other. To make the IoT ecosystem a reality, it is necessary to understand the electronic components, communication protocols, real-time analysis techniques, and the location of the objects and devices. The IoT ecosystem and the Digital Earth (DE) jointly form interrelated infrastructures for addressing today’s pressing issues and complex challenges. In this chapter, we explore the synergies and frictions in establishing an efficient and permanent collaboration between the two infrastructures, in order to adequately address multidisciplinary and increasingly complex real-world problems. Although there are still some pending issues, the identified synergies generate optimism for a true collaboration between the Internet of Things and the Digital Earth

Competition between Magnetic and Structural Transition in CrN

CrN is observed to undergo a paramagnetic to antiferromagnetic transition accompanied by a shear distortion from cubic NaCl-type to orthorhombic structure. Our first-principle plane wave and ultrasoft pseudopotential calculations confirm that the distorted antiferromagnetic phase with spin configuration arranged in double ferromagnetic sheets along [110] is the most stable. Antiferromagnetic ordering leads to a large depletion of states around Fermi level, but it does not open a gap. Simultaneous occurence of structural distortion and antiferromagnetic order is analyzed.Comment: 10 pages, 10 figure

Production and reliability oriented SOFC cell and stack design

The paper presents an innovative development methodology for a production and reliability oriented SOFC cell and stack design aiming at improving the stacks robustness, manufacturability, efficiency and cost. Multi-physics models allowed a probabilistic approach to consider statistical variations in production, material and operating parameters for the optimization phase. A methodology for 3D description of spatial distribution of material properties based on a random field models was developed and validated by experiments. Homogenized material models on multiple levels of the SOFC stack were established. The probabilistic models were related to the experimentally obtained properties of base materials to establish a statistical relationship between the material properties and the most relevant load effects. Software algorithms for meta models that allow the detection of relationships between input and output parameters and to perform a sensitivity analysis were developed and implemented. The capabilities of the methodology is illustrated on two practical cases

Exploring the Ni redox activity in polyanionic compounds as conceivable high potential cathodes for Na rechargeable batteries

Although nickel-based polyanionic compounds are expected to exhibit a high operating voltage for batteries based on the Ni2+/3+ redox couple activity, some rare experimental studies on the electrochemical performance of these materials are reported, resulting from the poor kinetics of the bulk materials in both Li and Na nonaqueous systems. Herein, the electrochemical activity of the Ni2+/3+ redox couple in the mixed-polyanionic framework Na4Ni3(PO4)2(P2O7) is reported for the first time. This novel material exhibits a remarkably high operating voltage when cycled in sodium cells in both carbonate- and ionic liquid-based electrolytes. The application of a carbon coating and the use of an ionic liquid-based electrolyte enable the reversible sodium ion (de-)insertion in the host structure accompanied by the redox activity of Ni2+/3+ at operating voltages as high as 4.8 V vs Na/Na+. These results present the realization of Ni-based mixed polyanionic compounds with improved electrochemical activity and pave the way for the discovery of new Na-based high potential cathode materials

Recent experimental probes of shear banding

Recent experimental techniques used to investigate shear banding are reviewed. After recalling the rheological signature of shear-banded flows, we summarize the various tools for measuring locally the microstructure and the velocity field under shear. Local velocity measurements using dynamic light scattering and ultrasound are emphasized. A few results are extracted from current works to illustrate open questions and directions for future research.Comment: Review paper, 23 pages, 11 figures, 204 reference

Ultrasound velocimetry in a shear-thickening wormlike micellar solution: Evidence for the coexistence of radial and vorticity shear bands

We carried out pointwise local velocity measurements on 40mM cetylpyridinium chloride-sodium salicylate (CPyCl-NaSal) wormlike micellar solution using high-frequency ultrasound velocimetry in a Couette shear cell. The studied wormlike solution exhibits Newtonian, shear-thinning and shear-thickening rheological behavior in a stress-controlled environment. Previous rheology, flow visualization and small-angle light/neutron scattering experiments in the shear-thickening regime of this system showed the presence of stress-driven alternating transparent and turbid rings or vorticity bands along the axis of the Couette geometry. Through local velocity measurements we observe a homogeneous flow inside the 1mm gap of the Couette cell in the shear-thinning (stress-plateau) region. Only when the solution is sheared beyond the critical shear stress (shear-thickening regime) in a stress-controlled experiment, we observe inhomogeneous flow characterized by radial or velocity gradient shear bands with a highly sheared band near the rotor and a weakly sheared band near the stator of the Couette geometry. Furthermore, fast measurements performed in the shear-thickening regime to capture the temporal evolution of local velocities indicate coexistence of both radial and vorticity shear bands. However the same measurements carried out in shear rate controlled mode of the rheometer do not show such rheological complexity

Triode Solid Oxide Fuel Cell Operation Under Sulfur-Poisoning Conditions

The triode solid oxide fuel cell (SOFC) is a three electrodes configuration. The third electrode, so-called auxiliary, is connected in a way to run in electrolysis mode, while cathode and anode operate in normal fuel cell mode. This mixed operation allows to reach anode-cathode potential differences which are not accessible in normal operation. In this work, the benefits of triode operation under sulfur-poisoning conditions are shown. In particular, the difference between conventional and triode operation mode under 2ppm of H2S in H-2 are analyzed. The partial reversibility of sulfur poisoning is investigated and the observed regeneration processes are discussed for both the conventional and triode operation. After each sequence of exposure and regeneration, IV and EIS characteristics are taken. The electrochemical impedance spectra are further processed by computing the distribution of relaxation times (DRT). During triode operation, less degradation during exposure and faster stabilization after exposure and regeneration with respect to conventional operation mode are observed