Study and program plan for improved heavy duty gas turbine engine ceramic component development

Fuel economy in a commercially viable gas turbine engine was demonstrated through use of ceramic materials. Study results show that increased turbine inlet and generator inlet temperatures, through the use of ceramic materials, contribute the greatest amount to achieving fuel economy goals. Improved component efficiencies show significant additional gains in fuel economy

Advanced Gas Turbine (AGT) power-train system development

Technical work on the design and component testing of a 74.5 kW (100 hp) advanced automotive gas turbine is described. Selected component ceramic component design, and procurement were tested. Compressor tests of a modified rotor showed high speed performance improvement over previous rotor designs; efficiency improved by 2.5%, corrected flow by 4.6%, and pressure ratio by 11.6% at 100% speed. The aerodynamic design is completed for both the gasifier and power turbines. Ceramic (silicon carbide) gasifier rotors were spin tested to failure. Improving strengths is indicated by burst speeds and the group of five rotors failed at speeds between 104% and 116% of engine rated speed. The emission results from combustor testing showed NOx levels to be nearly one order of magnitude lower than with previous designs. A one piece ceramic exhaust duct/regenerator seal platform is designed with acceptable low stress levels

Closed-loop recycling of plastics enabled by dynamic covalent diketoenamine bonds.

Recycled plastics are low-value commodities due to residual impurities and the degradation of polymer properties with each cycle of re-use. Plastics that undergo reversible polymerization allow high-value monomers to be recovered and re-manufactured into pristine materials, which should incentivize recycling in closed-loop life cycles. However, monomer recovery is often costly, incompatible with complex mixtures and energy-intensive. Here, we show that next-generation plastics-polymerized using dynamic covalent diketoenamine bonds-allow the recovery of monomers from common additives, even in mixed waste streams. Poly(diketoenamine)s 'click' together from a wide variety of triketones and aromatic or aliphatic amines, yielding only water as a by-product. Recovered monomers can be re-manufactured into the same polymer formulation, without loss of performance, as well as other polymer formulations with differentiated properties. The ease with which poly(diketoenamine)s can be manufactured, used, recycled and re-used-without losing value-points to new directions in designing sustainable polymers with minimal environmental impact

Nutritional strategies of British professional and amateur natural bodybuilders during competition preparation

Background: To prepare for competition, bodybuilders employ strategies based around: energy restriction, resistance training, cardiovascular exercise, isometric "posing", and supplementation. Cohorts of professional (PRO) natural bodybuilders offer insights into how these strategies are implemented by elite competitors, and are undocumented in the scientific literature. Methods: Forty-seven competitors (33 male (8 PRO, 25 amateur (AMA), 14 female (5 PRO, 9 AMA) participated in the study. All PROs were eligible to compete with the Drug Free Athletes Coalition (DFAC), and all AMAs were recruited from the British Natural Bodybuilding Federation (BNBF). Competitors in these organisations are subject to a polygraph and are drug tested in accordance with the World Anti-Doping Agency. We report the results of a cross-sectional study of drug free bodybuilders competing at BNBF qualifying events, and the DFAC and World Natural Bodybuilding Federation finals. Participants completed a 34-item questionnaire assessing dietary intake at three time points (start, middle and end) of competition preparation. Participants recorded their food intake over a 24-h period in grams and/or portions. Dietary intakes of PRO and AMA competitors were then compared. Repeated measures ANOVA was used to test if nutrient intake changed over time, and for associations with division. Results: Male PROs reported significantly (p < 0.05) more bodybuilding experience than AMAs (PRO: 12.3 +/- 9.2, AMA: 2.4 +/- 1.4 yrs). Male PROs lost less body mass per week (PRO: 0.5 +/- 0.1, AMA: 0.7 +/- 0.2%, p < 0.05), and reported more weeks dieting (PRO: 28.1 +/- 8.1, AMA: 21.0 +/- 9.4 wks, P = 0.06). Significant differences (p < 0.05) of carbohydrate and energy were also recorded, as well as a difference (p = 0.03) in the estimated energy deficit (EED), between male PRO (2.0 +/- 5.5 kcal) and AMA (- 3.4 +/- 5.5 kcal) competitors. Conclusions: Longer diets and slower weight loss utilized by PROs likely contributed towards a lower EED compared to the AMAs. Slower weight loss may constitute an effective strategy for maintaining energy availability and muscle mass during an energy deficit. These findings require corroboration, but will interest bodybuilders and coaches

Advanced Gas Turbine (AGT): Power-train system development

Technical work on the design and effort leading to the testing of a 74.5 kW (100 hp) automotive gas turbine is described. The general effort was concentrated on building an engine for test starting in July. The buildup progressed with only routine problems and the engine was delivered to the test stand 9 July. In addition to the engine build effort, work continued in selected component areas. Ceramic turbine parts were built and tested. Burst tests of ceramic rotors show strengths are approaching that achieved in test bars; proof testing is required for acceptable strength ceramic vanes. Over 25 hours was accumulated on the combustor rig in three test modes: pilot nozzle only, start nozzle, and main nozzle operation. Satisfactory ignition was achieved for a wide range of starting speeds and the lean blowout limit was as low as 0.06 kg/b (0.14 lb/hr). Lean blowout was more a function of nozzle atomization than fuel/air ratio. A variety of cycle points were tested. Transition from start nozzle flow to main nozzle flow was done manually without difficulty. Regenerator parts were qualification tested without incident and the parts were assembled on schedule. Rig based performance matched first build requirements. Repeated failures in the harmonic drive gearbox during rig testing resulted in that concept being abandoned for an alternate scheme

Racial Dynamics in Counselor Training: The Racial Identity Social Interaction Model

Counselors frequently receive their initial training about the dynamics of race and culture in the counseling process in didactic group settings, such as multicultural courses and experiential skills-building labs. Whereas multicultural and diversity courses reportedly have been growth promoting for students, counselor educators describe several difficulties that arise as they attempt to teach these courses. Yet virtually no research has focused on examination of instructors’ difficulties from a theoretical perspective. To examine the complex, intersecting dynamics that occur when teaching groups of counselor trainees about race and culture, we used Directed Content Analysis with theoretical guidance from the Racial Identity Social Interaction Model. We analyzed interviews obtained from instructors (n = 8) who had led small-group counseling skills labs with a multicultural and social justice perspective. Problematic dynamics occurred in three major domains, group, leader, and institutional dynamics. Implications for teaching about race and culture in group settings are discussed