Electronic monitoring for improved accountability in western Pacific tuna longline fisheries

The collection of accurate fisheries catch data is critical to ensuring sustainable management of tuna fisheries, mitigating their environmental impacts and for managing transboundary fish stocks. These challenges are exemplified by the western Pacific tuna longline fishery, who's management includes >26 nations, but is informed by critically low coverage of fishing activities by scientific observers. The gap in observer data could be filled by electronic monitoring (EM), but there are few trials that span multiple nations. A large-scale trial of EM systems on tuna longliners based in Palau, Federated States of Micronesia and the Republic of the Marshall Islands, is reported on. Comparisons are made of catch rates of market and bycatch species in corresponding EM, logbook and human observer data. Retained species were under-reported in logbooks by up to three times and discards of many species were not reported in logbooks. Discards identified in the EM data included threatened species such as marine turtles. Catch rate estimates from EM data were comparable to those estimated by human observers. EM data recorded a higher species diversity of catches than logbook data. Analysis of the EM data indicated clusters of bycatch that were associated with specific fishing practices. These results suggest further expansion of EM could inform improved management of both target and bycatch species. Ultimately greater coverage of EM data could contribute to reconciling debates in international stock allocation schemes and support actions to reduce the impacts of the fishery on threatened bycatch species

Inelastic buckling of tubular section beams

104 σ.Στη μηχανική με τον όρο “λυγισμό”, νοείται αστοχία λόγω απώλειας της ευστάθειας ενός φορέα που υπόκειται μόνο σε αυστηρά κεντρικό αξονικό φορτίο. Η ύπαρξη, ωστόσο, αρχικών ατελειών ή εκκεντρότητας του φορτίου, οδηγεί στην καμπτοθλιπτική καταπόνηση του μέλους. Έτσι, η κατανομή των τάσεων καθ’ ύψος της διατομής δεν είναι ομοιόμορφη, και η τάση στη δυσμενέστερη ίνα του μέλους, που είναι η ακραία θλιβόμενη της μεσαίας διατομής, μπορεί να φτάσει την τιμή της τάσης διαρροής πριν φτάσει η φόρτιση το κρίσιμο φορτίο λυγισμού, οπότε και έχουμε πλαστικό λυγισμό. Το φαινόμενο του πλαστικού λυγισμού εμφανίζεται περισσότερο σε ένα εύρος τιμών της λυγηρότητας των υποστυλωμάτων. Στη συγκεκριμένη εργασία επιλέξαμε διάφορες διατομές κλιμακωτά αυξανόμενης διαμέτρου ,τις οποίες ελέγξαμε στο φαινόμενο του πλαστικού λυγισμού, αφού θεωρήσαμε σε αυτές διάφορες τιμές αρχικών βελών, επί του ισχυρού άξονα. Για να το κάνουμε αυτό, θέσαμε κάποιες παραδοχές και εν συνεχεία προσεγγίσαμε θεωρητικά την εκδήλωση του φαινομένου. Το επόμενο βήμα είναι η σύγκριση των αποτελεσμάτων που προέκυψαν από την προσέγγισή μας, με τις αντίστοιχες κρίσιμες τιμές που προκύπτουν από τον Ευρωπαικό Κανονισμό (EC3) και η επαλήθευση των αποτελεσμάτων από πρόγραμμα Η/Υ με τη μέθοδο των πεπερασμένων στοιχείων (Abaqus). Τέλος, παρουσιάζονται διάφορες καμπύλες για τις υπό μελέτη διατομές, όπου φαίνεται η επίδραση της αλλαγής των γεωμετρικών τους στοιχείων,η ποιότητα χάλυβα,οι αρχικές ατέλειες κτλ,στην εκδήλωση του πλαστικού λυγισμού. Το φαινόμενο του πλαστικού λυγισμού, χαρακτηρίζεται από μικρές τιμές του ποσοστού της διαφοράς ανάμεσα στο κρίσιμο φορτίο (πλαστικό) και του ελαστικού φορτίου (φορτίο πρώτης διαρροής) ως προς το δεύτερο. Οι τιμές αυτές της πλαστικής “υπεραντοχής” εξαρτώνται από τη διατομή και την ποιότητα του χάλυβα, αλλά ακόμη περισσότερο από τη λυγηρότητα του κάθε υποστυλώματος. Επίσης, είδαμε ότι όσο πιο μεγάλη είναι η αρχική ατέλεια (αρχικό βέλος κάμψης), τόσο μικρότερο είναι το κρίσιμο φορτίο και τόσο πιο μεγάλη η τελική παραμόρφωση του υποστυλώματος.In mechanics, the term "buckling" means failure due to loss of stability of a member, that is subject of strictly central axial load. The presence, however, of initial imperfections or load eccecintricity leads to compressive and flexural loading of the member. Thus, the stress distribution on height of the section is not uniform., and the stress of the least favourable fiber of the member, which is the farther fiber under compression at the middle section of the member, can reach the value of the characteristic yield stress of the steel, before the load reaches the critical buckling load, so it appears the effect of inelastic buckling. This effect appears more in a value range of the slenderness of the columns.In this particular thesis we chose various sections of increasing diameter ,which we had them tested on the effect of inelastic buckling, since we considered different values of initial bending displacement, on the strong axis. To do that, we have some assumptions and then we approached theoritically the progress of the effect. The next step is the comparison of the theoritical results of our approach, with the corresponding critical values result-ing by the Eurocodes. (EC3) and the verification of the results with the use of a PC programm with finite elements analysis (Abaqus). Finally, are being presented some curves for the studied sections, where we can see the effects of the geometrical changes,steel quality,initial imperfections etc. at inelastic buckling. The effect of inelastic buckling, characterized by small values of the percentage of the difference between the critical load (inelastic) and the elastic load (first failure) divided by the second. The values of this inelastic “overstrength”, depend on the section and the quality of the steel, but even more on the slenderness of each column. We also noticed, that the bigger the initial imperfection (initial bending displacement), the less the critical load, and the bigger the final displacement of the column.Αντώνιος Χ. Ανουσάκη

Post‐release survival of shortfin mako ( Isurus oxyrinchus ) and silky ( Carcharhinus falciformis ) sharks released from pelagic tuna longlines in the Pacific Ocean

Substantial global population declines in pelagic sharks have led to the introduction of management and conservation measures, including gear restrictions and no-retention policies, to curb declines and encourage stock recovery. As the rate of discarding sharks increases, there is a growing need to understand prognostic factors that influence their post-release survival (PRS) outcomes. PRS was measured with survival pop-up satellite archival tags attached to shortfin mako (Isurus oxyrinchus) and silky sharks (Carcharhinus falciformis) released or discarded from pelagic tuna longline fishing vessels operating in the Western and Central Pacific Fisheries Commission Convention Area. In total, 117 tags were deployed on 60 mako and 57 silky sharks captured as bycatch during commercial pelagic longline fishing trips in New Zealand (n = 35), Fiji (n = 58), New Caledonia (n = 10) and the Republic of the Marshall Islands (n = 14). Mako engaged in long-distance movements between New Zealand, Australia, Fiji and New Caledonia, while silky sharks tagged in the Marshall Islands showed evidence of seasonal movements eastward. PRS was determined for 110 sharks (57 mako, 53 silky sharks). Most tagged sharks of both species were uninjured (89%) at capture and most sharks (88%) survived post-release until tag loss or the programmed pop-up date (60 days). However, when considering a complete fishing interaction (haulback, handling, release), PRS estimates were markedly reduced to 48.6% and 52.3% for mako and silky sharks, respectively. For both species, survivorship was greater in large (>150 cm fork length) uninjured sharks and sharks released with low shark length to trailing branchline ratios. While these findings suggest that retention bans offer sharks an increased chance of survival, continued efforts should be made to improve handling and release practices, reduce trailing gear and minimize pelagic shark bycatch