475 research outputs found
Impact of the aqueous corrosion induced alteration layer on mechanical properties of pharmaceutical glasses.
It is known that network modifying ions (such as alkali or alkaline earth ions) make glasses susceptible to aqueous corrosion, resulting in the alteration of their surface layers. However, the effect of the altered layers on the mechanical properties of glasses has not been well understood. In this work we study this effect using the pharmaceutical boroaluminosilicate (BAS) glasses as objects by performing nano- and macroscale mechanical tests. The results show that extending the corrosion time increases the thickness of the alteration layer of the BAS glass. The water-related species in the alteration layer lowers the nanohardness, the reduced modulus, the nanowear resistance and Vickers hardness. The corrosion-induced âsilica-likeâ structure in alteration layer benefits the densification of the subsurface caused by nanoindentation and nanowear, and thereby enhances the fracture toughness of the BAS glass. The correlation between the water content in the alteration layer and the mechanical properties has been revealed. This work is instrumental in the design of the next generation of pharmaceutical glasses with higher toughness
Adsorption and desorption of methylene blue on porous carbon monoliths and nanocrystalline cellulose
The dynamic batch adsorption of methylene blue (MB), a widely used and toxic dye, onto nanocrystalline cellulose (NCC) and crushed powder of carbon monolith (CM) was investigated using the pseudo-first- and -second-order kinetics. CM outperformed NCC with a maximum capacity of 127 mg/g compared to 101 mg/g for NCC. The Langmuir isotherm model was applicable for describing the binding data for MB on CM and NCC, indicating the homogeneous surface of these two materials. The Gibbs free energy of â15.22 kJ/mol estimated for CM unravelled the spontaneous nature of this adsorbent for MB, appreciably faster than the use of NCC (â4.47 kJ/mol). Both pH and temperature exhibited only a modest effect on the adsorption of MB onto CM. The desorption of MB from CM using acetonitrile was very effective with more than 94 % of MB desorbed from CM within 10 min to allow the reusability of this porous carbon material. In contrast, acetonitrile was less effective than ethanol in desorbing MB from NCC. The two solvents were incapable of completely desorbing MB on commercial granular coal-derived activated carbon
Fabrication and characterization of nanotemplated carbon monolithic material
A novel hierarchical nanotemplated carbon monolithic rod (NTCM) was prepared using a novel facile nanotemplating approach. The NTCM was obtained using C60-fullerene modified silica gels as hard templates, which were embedded in a phenolic resin containing a metal catalyst for localized graphitization, followed by bulk carbonization, and template and catalyst removal. TEM, SEM, and BET measurements revealed that NTCM possessed an integrated open hierarchical porous structure, with a trimodal pore distribution. This porous material also possessed a high mesopore volume and narrow mesopore size distribution.
During the course of carbonization, the C60 conjugated to aminated silica was partly decomposed, leading to the formation of micropores. The Raman signature of NTCM was very similar to that of multiwalled carbon nanotubes as exemplified by three major peaks as commonly observed for other carbon materials, i.e., the sp3 and sp2 carbon phases coexisted in the sample. Surface area measurements were obtained using both nitrogen adsorption/desorption isotherms (BET) and with a methylene blue binding assay, with BET results showing the NTCM material possessed an average specific surface area of 435 m2 gâ1, compared to an area of 372 m2 gâ1 obtained using the methylene blue assay. Electrochemical studies using NTCM modified glassy carbon or boron doped diamond (BDD) electrodes displayed quasi-reversible oxidation/reduction with ferricyanide. In addition, the BDD electrode modified with NTCM was able to detect hydrogen peroxide with a detection limit of below 300 nM, whereas the pristine BDD electrode was not responsive to this target compound
phase shifts and CP Violation in Decay
In the study of CP violation signals in {\O}\to\pi\Xi nonleptonic decays,
the strong =3/2 and phase shifts for the final-state
interactions are needed. These phases are calculated using an effective
Lagrangian model, including , (1530), and the -term,
in the intermediate states. The -term is calculated in terms of the
scalar form factor of the baryon.Comment: 6 pages, 2 figure
Measurement of Ultra-Low Potassium Contaminations with Accelerator Mass Spectrometry
Levels of trace radiopurity in active detector materials is a subject of
major concern in low-background experiments. Among the radio-isotopes, \k40
is one of the most abundant and yet whose signatures are difficult to reject.
Procedures were devised to measure trace potassium concentrations in the
inorganic salt CsI as well as in organic liquid scintillator (LS) with
Accelerator Mass Spectrometry (AMS), giving, respectively, the
\k40-contamination levels of and g/g.
Measurement flexibilities and sensitivities are improved over conventional
methods. The projected limiting sensitivities if no excess of potassium signals
had been observed over background are g/g and g/g for the CsI and LS, respectively. Studies of the LS samples
indicate that the radioactive contaminations come mainly in the dye solutes,
while the base solvents are orders of magnitude cleaner. The work demonstrate
the possibilities of measuring naturally-occurring isotopes with the AMS
techniques.Comment: 18 pages, 4 figures, 3 table
Franck-Condon Effect in Central Spin System
We study the quantum transitions of a central spin surrounded by a
collective-spin environment. It is found that the influence of the
environmental spins on the absorption spectrum of the central spin can be
explained with the analog of the Franck-Condon (FC) effect in conventional
electron-phonon interaction system. Here, the collective spins of the
environment behave as the vibrational mode, which makes the electron to be
transitioned mainly with the so-called "vertical transitions" in the
conventional FC effect. The "vertical transition" for the central spin in the
spin environment manifests as, the certain collective spin states of the
environment is favored, which corresponds to the minimal change in the average
of the total spin angular momentum.Comment: 8 pages, 8 figure
Nonintegrable Interaction of Ion-Acoustic and Electromagnetic Waves in a Plasma
In this paper we re-examine the one-dimensional interaction of
electromagnetic and ion acoustic waves in a plasma. Our model is similar to one
solved by Rao et al. (Phys. Fluids, vol. 26, 2488 (1983)) under a number of
analytical approximations. Here we perform a numerical investigation to examine
the stability of the model. We find that for slightly over dense plasmas, the
propagation of stable solitary modes can occur in an adiabatic regime where the
ion acoustic electric field potential is enslaved to the electromagnetic field
of a laser. But if the laser intensity or plasma density increases or the laser
frequency decreases, the adiabatic regime loses stability via a transition to
chaos. New asymptotic states are attained when the adiabatic regime no longer
exists. In these new states, the plasma becomes rarefied, and the laser field
tends to behave like a vacuum field.Comment: 19 pages, REVTeX, 6 ps figures, accepted for publication in Phys.
Rev.
Measurement of Trace I-129 Concentrations in CsI Powder and Organic Liquid Scintillator with Accelerator Mass Spectrometry
Levels of trace radiopurity in active detector materials is a subject of
major concern in low-background experiments. Procedures were devised to measure
trace concentrations of I-129 in the inorganic salt CsI as well as in organic
liquid scintillator with Accelerator Mass Spectrometry (AMS) which leads to
improvement in sensitivities by several orders of magnitude over other methods.
No evidence of their existence in these materials were observed. Limits of < 6
X 10^{-13} g/g and < 2.6 X 10^{-17} g/g on the contaminations of I-129 in CsI
and liquid scintillator, respectively, were derived.These are the first results
in a research program whose goals are to develop techniques to measure trace
radioactivity in detector materials by AMS.Comment: Proceedings of 10th International Conference on Accelerator Mass
Spectrometr
A CsI(Tl) Scintillating Crystal Detector for the Studies of Low Energy Neutrino Interactions
Scintillating crystal detector may offer some potential advantages in the
low-energy, low-background experiments. A 500 kg CsI(Tl) detector to be placed
near the core of Nuclear Power Station II in Taiwan is being constructed for
the studies of electron-neutrino scatterings and other keV-MeV range neutrino
interactions. The motivations of this detector approach, the physics to be
addressed, the basic experimental design, and the characteristic performance of
prototype modules are described. The expected background channels and their
experimental handles are discussed.Comment: 34 pages, 11 figures, submitted to Nucl. Instrum. Method
High Altitude test of RPCs for the ARGO-YBJ experiment
A 50 m**2 RPC carpet was operated at the YangBaJing Cosmic Ray Laboratory
(Tibet) located 4300 m a.s.l. The performance of RPCs in detecting Extensive
Air Showers was studied. Efficiency and time resolution measurements at the
pressure and temperature conditions typical of high mountain laboratories, are
reported.Comment: 16 pages, 10 figures, submitted to Nucl. Instr. Met
- âŠ