Prevalence of stress among Iranian medical students: A questionnaire survey

A cross-sectional study measured the frequency of self-reported stress symptoms among a weighted random sample of medical students in Isfahan, Islamic Republic of Iran. The data were gathered using the Kessler 10-item psychological distress scale. The overall prevalence of stress among 222 students was 61.3% and there were no statistically significant differences in stress levels between students in the pre-clinical and clinical phases or different years of study. Married students had significantly lower scores than single students but there were no differences between the sexes. Students who chose to study medicine had lower stress scores than those who were influenced by family or had no choice about the subject. Students with mild to moderate stress were significantly more likely to suffer physical problems (OR = 4.42). Interventions are needed to tackle stress and improve Iranian medical students' physical and psychological well-being

Evaluation of end bearing capacity of drilled shafts in sand by numerical and SPT-based methods

Drilled shafts are a common type of pile foundations which are often used as foundations for buildings, bridges and other structures. The end bearing capacity of drilled shafts, which plays an important role in their design particularly in sandy soils, has traditionally been estimated using empirical or semi-empirical methods. With advances in computing power, it is now possible to conduct more realistic analyses. In this paper, at first, the end bearing capacity of drilled shafts in sandy soils is analyzed numerically and validated with the results of pile load test. Then, the numerical results are compared with the results of Standard Penetration Test (SPT)-based methods. The comparison indicated that there is a satisfactory agreement between the results of numerical method proposed in this paper and the results achieved by SPT-based methods

EFFECTIVE FACTORS IN THE QUALITY OF LIFE IN PATIENTS WITH TYPE 2 DIABETES IN CHAHARMAHAL & BAKHTEYARI PROVINCE

Abstract: Background and objectives: Quality of life can be considered as a marker of the quality of health care and is a part of the patient's treatment plan. Its measurement in type 2 diabetic patients provides useful information to health authorities Material and Methods: This study is a descriptive-analytic cross–sectional study that has attempted to measure the quality of life in diabetic patients in Chaharmahal & Bakhteyari Province. The number of patients was 254 and they were selected randomly in two stages. Data were collected

Apoptosis/necrosis induction by ultraviolet, in ER positive and ER negative breast cancer cell lines

Background: Ultraviolet (UV) light exposure has been one of the major inducers of apoptosis. UV exposure has caused pyrimidine dimers and DNA fragmentation which might lead to cell cycle arrest and apoptosis signals activation. UV induced apoptosis has investigated in MDA-MB 468 as an ER negative breast adenocarcinoma and MCF-7 as an ER positive breast cancer cell line. Apoptosis induction rate by UV might be different in these two types of cells due to different biological characteristics of the cell. Objectives: In this paper we have evaluated serial dose of UV-B exposure on ER positive and ER negative breast cancer cell lines and its effect on apoptosis or necrosis induction in these cells. Materials and Methods: MDA-MB468 and MCF-7 cell lines have cultured for 24 hours and UV exposure has carried out at 290 nm at dose of 154 J/m2 to 18 KJ/m2 using UV lamp. UV exposed cells have incubated in cell culture condition for 24 or 48 hours following UV exposure and the cells have stained and analyzed by flow cytometry for apoptosis evaluation by Annexin V/PI method. Results: Apoptosis rate (PI and Annexin V double positive cells) after 24 hours incubation was higher in 24 hours in comparison with 48 hours incubation in both cell lines. The frequency of PI positive MDA-MB 468 cells was higher than PI and Annexin V double positive cells after 48 hours. PI positive MDA-MB 468 cells were significantly higher than MCF-7 cells in 24 hours incubation time. Conclusions: The results have shown that MDA-MB 468 cells were more sensitive to UV exposure and DNA fragmentation and necrosis pathway was dominant in these cells. © 2015, Iranian Journal of Cancer Prevention

Population genetic structure of Persian sturgeon (Acipenser persicus) between South Caspian Sea and Sefidrud River using DNA sequencing method

The goal of this study was to analyse the population genetic structure of the Persian sturgeon (Acipenser persicus) between South Caspian Sea and Sefidrud River with mtDNA control region (Dloop gene) and DNA sequencing method during 2010 – 2012 sturgeon stock assessment project. Fish speciemns were collected by bottom trawl net. Extraction of DNA, PCR and DNA sequencing were carried out. Diversity index, the gamma distribution shape parameter for the rate heterogeneity among sites and nucleotide sequence, Fst index, exact test, the historical demographic pattern using neutrality tests and mismatch distribution analysis (D test of Tajima and Fs test of Fu) were analysed. Thirteen haplotypes were obtained, average (±SD) for haplotype diversity was 0.961 ± 0.101, nucleotide diversity was 0.038 ± 0.015, the gamma distribution shape parameter was 0.19, Fst index revealed little genetic structure between populations and the significant Fst value was seen by 10000 permutation only between Sefidrud River and Other Areas (P≤ 0.05) and was confirmed by exact test of population differentiation. Mismatch distribution for Acipenser persicus appeared to be unimodal, which closely matched the expected distributions under the sudden expansion model and supported by the low Harpending’s Raggedness index (0.061). Tajima’s D and Fu’s Fs statistics were -0.84 and - 0.220, respectively, and was not significant. The results of this study showed that the population of Acipenser persicus in Sefidrud River were genetically differentiated from South Caspian Sea and three other areas represented a single panmictic populations. Therefore, fisheries managements of this valuable species should be directed towards conservation of gene pools and increasing different populations

The effect of hydro-alcoholic extract of celery (Apium graveolens) leaves on serum level of testosterone, FSH and LH in male rats

Background and Objective: Celery (Apium graveolens) is a plant from Apiaceae family with high nutritional and medicinal use.This plant has many phytoestrogens that can affect the pituitary-gonadal axis. The purpose of this study was to investigate the effect of hydro-alcoholic extract of celery leaves on serum level of testosterone, FSH and LH in male rats. Materials and Methods: In this experimental study, thirty-two male wistar rats were randomly divided into four groups of eight rats each. The control group did not receive anything. The sham group received distilled water (as a solvent), and the experimental groups received doses of 200 and 300 mg/kg/ BW of hydro-alcoholic extract of celery leaves for 20 days. The extract was gavaged once a day. One day after the last gavage, the rats were anaesthetized and blood samples were collected from the heart and then serum levels of testosterone, LH and FSH were measured. The data were analyzed using SPSS software and ANOVA test. Results: Concentration of LH in the treatment group with doses of 200 mg/kg (0.39±0.02 mIU/dl) reduced in comparison with control (0.67±0.01 mIU/dl) and sham (0.73±0.02 mIU/dl) groups (P0.05). Conclusion: The results indicated that the administration of 200 mg/kg doses of celery extract causes a significant reduction in serum LH concentration, but it has no effect on ganadotropin and testosterone hormones in highest doses used in this study. This finding may be due to the presence of flavonoid and antioxidant proporties of celery

CHARACTERIZATION OF UNDERLYING LAYER STABILIZATION MATERIAL FOR MECHANISTIC-EMPIRICAL DESIGN OF RIGID PAVEMENTS

The Mechanistic-Empirical Pavement Design Guide (MEPDG) is applied to calculate pavement responses against the cumulative damage over time, taking into account the general properties of materials, traffic, environmental conditions and pavement structure. The procedure described in the guide was used in this paper to provide appropriate design alternatives for the existing conditions. The two most common types of rigid pavements for highways, Continuously Reinforced Concrete Pavement (CRCP) and Jointed Plain Concrete Pavement (JPCP) were considered in the design. The base layer material was chosen in such a way that a reasonable design life and distress level can be obtained. For each type of chemical stabilization techniques of the underlying layers, the satisfactory design cases were proposed based on the M-E design procedure. For CRCP, the results were also compared with those obtained from the procedure suggested by Texas Department of Transportation (TxDOT) pavement design manual

Flood loss modelling with FLF-IT: a new flood loss function for Italian residential structures

The damage triggered by different flood events costs the Italian economy millions of euros each year. This cost is likely to increase in the future due to climate variability and economic development. In order to avoid or reduce such significant financial losses, risk management requires tools which can provide a reliable estimate of potential flood impacts across the country. Flood loss functions are an internationally accepted method for estimating physical flood damage in urban areas. In this study, we derived a new flood loss function for Italian residential structures (FLF-IT), on the basis of empirical damage data collected from a recent flood event in the region of Emilia-Romagna. The function was developed based on a new Australian approach (FLFA), which represents the confidence limits that exist around the parameterized functional depth–damage relationship. After model calibration, the performance of the model was validated for the prediction of loss ratios and absolute damage values. It was also contrasted with an uncalibrated relative model with frequent usage in Europe. In this regard, a three-fold cross-validation procedure was carried out over the empirical sample to measure the range of uncertainty from the actual damage data. The predictive capability has also been studied for some sub-classes of water depth. The validation procedure shows that the newly derived function performs well (no bias and only 10 % mean absolute error), especially when the water depth is high. Results of these validation tests illustrate the importance of model calibration. The advantages of the FLF-IT model over other Italian models include calibration with empirical data, consideration of the epistemic uncertainty of data, and the ability to change parameters based on building practices across Italy