Investigation of a Pt containing washcoat on SiC foam for hydrogen combustion applications

A commercial Pt based washcoat, used for catalytic methane combustion, was studied supported on a commercial SiC foam as catalytic material (Pt/SiC) for catalytic hydrogen combustion (CHC). Structural and chemical characterization was performed using Electron Microscopy, X-Ray Diffraction (XRD) and X-Ray Photoelectron Spectroscopy (XPS). The reaction was monitored following water concentration by Fourier Transform Infrared spectra (FTIR). The FTIR method was compared with H2 detection by Gas Cromatography (GC) and has shown to be adequate to study the kinetics of the CHC reaction in steady state under our experimental conditions (very lean 1% (v/v) H2/air mixtures). The catalyst is composed of 5–20 nm disperse Pt nanoparticles decorating a mixture of high surface area Al2O3 and small amounts of ceria supported on the SiC foam which also contains alumina as binder. The Pt/SiC catalytic material has demonstrated to be active enough to start up the reaction in a few seconds at room temperature. The material has been able to convert at least 18.5 Lhydrogen min−1 gPt−1 at room temperature in conditions of excess of catalyst. The Pt/SiC material was studied after use using XPS and no significant changes on Pt oxidation states were found. The material was characterized from a kinetic point of view. From the conversion-temperature plot a T50 (temperature for 50% conversion) of 34 °C was obtained. Activation energy measured in our conditions was 35 ± 1 kJ mol−1.Peer reviewe

Reaction mechanism of the direct gas phase synthesis of H2O2 catalyzed by Au3

The gas phase reaction of molecular oxygen and hydrogen catalyzed by a Au3cluster to yield H2O2 was investigated theoretically using second order Z-averaged perturbation theory, with the final energies obtained with the fully size extensive completely renormalized CR-CC(2,3) coupled clustertheory. The proposed reaction mechanism is initiated by adsorption and activation of O2 on the Au3cluster. Molecular hydrogen then binds to the Au3O2 global minimum without an energy barrier. The reaction between the activated oxygen and hydrogen molecules proceeds through formation of hydroperoxide (HO2) and a hydrogen atom, which subsequently react to form the product hydrogen peroxide. All reactants, intermediates, and product remain bound to the goldcluster throughout the course of the reaction. The steps in the proposed reaction mechanism have low activation energy barriers below 15kcal∕mol. The overall reaction is highly exothermic by ∼30kcal∕mol

Paclitaxel plus Carboplatin Chemotherapy for Primary Peritoneal Carcinoma: A Study of 22 Cases and Comparison with Stage III–IV Ovarian Serous Carcinoma

The aim of this study was to assess the clinical characteristics and outcome of patients with either primary peritoneal carcinoma (PPC) or ovarian serous carcinoma (OSC) treated with paclitaxel plus carboplatin chemotherapy. We retrospectively identified 22 PPC patients and 55 stage III–IV OSC patients treated between 2002 and 2007. After exploratory laparotomy, all patients received paclitaxel and carboplatin every 3 weeks, with the goal of optimal cytoreduction. There were no statistically significant differences between the PPC and OSC groups with regard to tumor stage, residual tumor after debulking surgery (initial or interval), serum cancer antigen (CA) 125 levels at diagnosis, and completion of first-line chemotherapy. The progression-free survival (PFS) durations were 12.7 months (95% CI, 6.3–18.5) in the patients with PPC and 15.9 months (95% CI, 13.3–18.5) in those with OSC (p = 0.016). However, the median survival durations were 26.5 months (95% CI, 14.6–38.3) in the patients with PPC and 38 months (95% CI, 23.8–53.8) in those with OSC (p = 0.188). Survival was longer for all patients whose CA125 levels normalized to 26 U/ml during and after treatment. Overall survival (OS) of the patients with PPC was similar to that of the patients with OSC, suggesting that management for advanced-stage OSC would be similar to that for PPC. The combination of optimal debulking with paclitaxel plus carboplatin chemotherapy may offer patients the most effective treatment. The CA125 nadir after cytoreductive surgery can be considered a prognostic factor for OS and PFS in patients with PPC

Homogeneous Gold Catalysis through Relativistic Effects: Addition of Water to Propyne

In the catalytic addition of water to propyne the Au(III) catalyst is not stable under non-relativistic conditions and dissociates into a Au(I) compound and Cl2. This implies that one link in the chain of events in the catalytic cycle is broken and relativity may well be seen as the reason why Au(III) compounds are effective catalysts.Comment: 12 pages, 3 figures, 1 tabl

Speciation-controlled incipient wetness impregnation: A rational synthetic approach to prepare sub-nanosized and highly active ceria–zirconia supported gold catalysts

On the basis of calculated thermodynamic species distribution diagrams and by appropriately controlling the pH of aqueous HAuCl4 solutions, it has been possible to prepare, using a Speciation-controlled Incipient Wetness Impregnation (ScIWI) approach, Au catalysts supported on ceria–zirconia mixed oxides featuring both high gold loadings and excellent metal dispersions. This rational synthesis method is carried out at room temperature. It is both much simpler, in equipment terms, and less expensive than widely used Deposition–Precipitation (DP). Moreover, the use of ScIWI allows overcoming the severe limitations of previously assayed impregnation methods. With this procedure it is possible to prepare active catalysts in CO oxidation with high efficiency in terms of gold precursor usage, i.e. minimizing Au losses during synthesis. Therefore this, quite amenable, novel strategy for the facile preparation of highly dispersed supported gold catalysts gathers the necessary requirements for both its use at lab scale and an easy scaling-up to industrial levels

A QM/MM approach for the study of monolayer-protected gold clusters

We report the development and implementation of hybrid methods that combine quantum mechanics (QM) with molecular mechanics (MM) to theoretically characterize thiolated gold clusters. We use, as training systems, structures such as Au25(SCH2-R)18 and Au38(SCH2-R)24, which can be readily compared with recent crystallographic data. We envision that such an approach will lead to an accurate description of key structural and electronic signatures at a fraction of the cost of a full quantum chemical treatment. As an example, we demonstrate that calculations of the 1H and 13C NMR shielding constants with our proposed QM/MM model maintain the qualitative features of a full DFT calculation, with an order-of-magnitude increase in computational efficiency.Comment: Journal of Materials Science, 201

Identifying the Azobenzene/Aniline reaction intermediate on TiO2-(110) : a DFT Study

Density functional theory (DFT) calculations, both with and without dispersion corrections, have been performed to investigate the nature of the common surface reaction intermediate that has been shown to exist on TiO2(110) as a result of exposure to either azobenzene (C6H5N═NC6H5) or aniline (C6H5NH2). Our results confirm the results of a previous DFT study that dissociation of azobenzene into two adsorbed phenyl imide (C6H5N) fragments, as was originally proposed, is not energetically favorable. We also find that deprotonation of aniline to produce this surface species is even more strongly energetically disfavored. A range of alternative surface species has been considered, and while dissociation of azobenzene to form surface C6H4NH species is energetically favored, the same surface species cannot form from adsorbed aniline. On the contrary, adsorbed aniline is much the most stable surface species. Comparisons with experimental determinations of the local adsorption site, the Ti–N bond length, the molecular orientation, and the associated C 1s and N 1s photoelectron core level shifts are all consistent with the DFT results for adsorbed aniline and are inconsistent with other adsorbed species considered. Possible mechanisms for the hydrogenation of azobenzene required to produce this surface species are discussed