Do good health and material circumstances protect older people from the increased risk of death after bereavement?

This is an open access Article. Copyright @ 2012 The AuthorsAn increased risk of death in persons who have suffered spousal bereavement has been described in many populations. The impact of modifying factors, such as chronic disease and material circumstances, is less well understood. The authors followed 171,120 couples 60 years of age or older in a United Kingdom primary care database between 2005 and 2010 for an average of 4 years. A total of 26,646 (15.5%) couples experienced bereavement, with mean follow up after bereavement of 2 years. In a model adjusted for age, sex, comorbid conditions at baseline, material deprivation based on area of residence, season, and smoking status, the hazard ratio for mortality in the first year after bereavement was 1.25 (95% confidence interval: 1.18, 1.33). Further adjustment for changes in comorbid conditions throughout follow up did not alter the hazard ratio for bereavement (hazard ratio = 1.27, 95% confidence interval: 1.19, 1.35). The association was strongest in individuals with no significant chronic comorbid conditions throughout follow up (hazard ratio = 1.50, 95% confidence interval: 1.28, 1.77) and in more affluent couples (P = 0.035). In the first year after bereavement, the association between bereavement and death is not primarily mediated through worsening or new onset of chronic disease. Good health and material circumstances do not protect individuals from increased mortality rates after bereavement.This study was funded by a grant from the Dunhill Medical Trust

Characterising the vertical separation of shale-gas source rocks and aquifers across England and Wales (UK)

Shale gas is considered by many to have the potential to provide the UK with greater energy security, economic growth and jobs. However, development of a shale gas industry is highly contentious due to environmental concerns including the risk of groundwater pollution. Evidence suggests that the vertical separation between exploited shale units and aquifers is an important factor in the risk to groundwater from shale gas exploitation. A methodology is presented to assess the vertical separation between different pairs of aquifers and shales that are present across England and Wales. The application of the method is then demonstrated for two of these pairs—the Cretaceous Chalk Group aquifer and the Upper Jurassic Kimmeridge Clay Formation, and the Triassic sandstone aquifer and the Carboniferous Bowland Shale Formation. Challenges in defining what might be considered criteria for ‘safe separation’ between a shale gas formation and an overlying aquifer are discussed, in particular with respect to uncertainties in geological properties, aquifer extents and determination of socially acceptable risk levels. Modelled vertical separations suggest that the risk of aquifer contamination from shale exploration will vary greatly between shale–aquifer pairs and between regions and this will need to be considered carefully as part of the risk assessment and management for any shale gas development

An effective route to the additive manufacturing of a mechanically gradient supramolecular polymer nanocomposite structure

3D Printing techniques are additive methods of fabricating parts directly from computer-aided designs. Whilst the clearest benefit is the realisation of geometrical freedom, multi-material printing allows the introduction of compositional variation and highly tailored product functionality. The paper reports a proof-of-concept additive manufacturing study to deposit a supramolecular polymer and a complementary organic filler to form composites with gradient composition to enable spatial distribution of mechanical properties and functionality by tuning the number of supramolecular interactions. We use a dual-feed extrusion 3D printing process, with feed stocks based on the supramolecular polymer and its organic composite, delivered at ratios predetermined. This allows for production of a graded specimen with varying filler concentration that dictates the mechanical properties. The printed specimen was inspected under dynamic load in a tensile test using digital image correlation to produce full-field deformation maps, which showed clear differences in deformation in regions with varying compositions, corresponding to the designed-in variations. This approach affords a novel method for printing material with graded mechanical properties which are not currently commercially available or easily accessible, however, the method can potentially be directly translated to the generation of biomaterial-based composites featuring gradients of mechanical properties

Reversible, High-Affinity Surface Capturing of Proteins Directed by Supramolecular Assembly

The ability to design surfaces with reversible, high-affinity protein binding sites represents a significant step forward in the advancement of analytical methods for diverse biochemical and biomedical applications. Herein, we report a dynamic supramolecular strategy to directly assemble proteins on surfaces based on multivalent host–guest interactions. The host–guest interactions are achieved by one-step nanofabrication of a well-oriented β-cyclodextrin host-derived self-assembled monolayer on gold (β-CD-SAM) that forms specific inclusion complexes with hydrophobic amino acids located on the surface of the protein. Cytochrome c, insulin, α-chymotrypsin, and RNase A are used as model guest proteins. Surface plasmon resonance and static time-of-flight secondary ion mass spectrometry studies demonstrate that all four proteins interact with the β-CD-SAM in a specific manner via the hydrophobic amino acids on the surface of the protein. The β-CD-SAMs bind the proteins with high nanomolar to single-digit micromolar dissociation constants (KD). Importantly, while the proteins can be captured with high affinity, their release from the surface can be achieved under very mild conditions. Our results expose the great advantages of using a supramolecular approach for controlling protein immobilization, in which the strategy described herein provides unprecedented opportunities to create advanced bioanalytic and biosensor technologies

License prices for financially constrained firms

It is often alleged that high auction prices inhibit service deployment. We investigate this claim under the extreme case of financially constrained bidders. If demand is just slightly elastic, auctions maximize consumer surplus if consumer surplus is a convex function of quantity (a common assumption), or if consumer surplus is concave and the proportion of expenditure spent on deployment is greater than one over the elasticity of demand. The latter condition appears to be true for most of the large telecom auctions in the US and Europe. Thus, even if high auction prices inhibit service deployment, auctions appear to be optimal from the consumers’ point of view

Enhancement of microphase ordering and mechanical properties of supramolecular hydrogen-bonded polyurethane networks

The improvement of the mechanical properties of supramolecular polymer networks is currently receiving significant interest both within academic and industrial circles in order to enable the application of these desirable stimuli-responsive materials in real world situations. In this study, structural units within phase separated supramolecular polyurethane (SPU) networks have been changed to assess the role of the hard segment composition on the mechanical characteristics of the resultant materials. Notably, increasing the degrees of conformational freedom within the hard segment component of a SPU was found to improve the phase separation and as a consequence also increase the storage modulus of the polymer network. Specifically, replacing 4,4′-methylene diphenyl diisocyanate with 4,4’-dibenzyl diisocyanate within a SPU improved the packing efficiency of the isocyanate derived hard segments and improved the physical properties of the supramolecular polymer network. This study utilised a combination of SAXS, WAXS and AFM analysis to assess the degree of crystallinity within the hard segment component of the polymer network whilst rheological analysis was used to establish the mechanical characteristics of the polymers

Acute high-intensity exercise and skeletal muscle mitochondrial respiratory function: role of metabolic perturbation

Recently it was documented that fatiguing, high-intensity exercise resulted in a significant attenuation in maximal skeletal muscle mitochondrial respiratory capacity, potentially due to the intramuscular metabolic perturbation elicited by such intense exercise. With the utilization of intrathecal fentanyl to attenuate afferent feedback from group III/IV muscle afferents, permitting increased muscle activation and greater intramuscular metabolic disturbance, this study aimed to better elucidate the role of metabolic perturbation on mitochondrial respiratory function. Eight young, healthy males performed high-intensity cycle exercise in control (CTRL) and fentanyl-treated (FENT) conditions. Liquid chromatography-mass spectrometry and high-resolution respirometry were used to assess metabolites and mitochondrial respiratory function, respectively, pre- and postexercise in muscle biopsies from the vastus lateralis. Compared with CTRL, FENT yielded a significantly greater exercise-induced metabolic perturbation (PCr: −67% vs. −82%, Pi: 353% vs. 534%, pH: −0.22 vs. −0.31, lactate: 820% vs. 1,160%). Somewhat surprisingly, despite this greater metabolic perturbation in FENT compared with CTRL, with the only exception of respiratory control ratio (RCR) (−3% and −36%) for which the impact of FENT was significantly greater, the degree of attenuated mitochondrial respiratory capacity postexercise was not different between CTRL and FENT, respectively, as assessed by maximal respiratory flux through complex I (−15% and −33%), complex II (−36% and −23%), complex I + II (−31% and −20%), and state 3CI+CII control ratio (−24% and −39%). Although a basement effect cannot be ruled out, this failure of an augmented metabolic perturbation to extensively further attenuate mitochondrial function questions the direct role of high-intensity exercise-induced metabolite accumulation in this postexercise response

A shortest path algorithm for graphs featuring transfer costs at their vertices

This paper examines the problem of finding shortest paths in graphs that feature additional penalties – transfer costs – at their vertices. We propose a shortest path algorithm that can cope with these additional penalties without the need of first performing a graph expansion, which is the typical algorithmic strategy. While our method exhibits an inferior growth rate compared to existing approaches, we show that it is more efficient on sparse graphs

Simulating human behavior for national security human interactions.

This 3-year research and development effort focused on what we believe is a significant technical gap in existing modeling and simulation capabilities: the representation of plausible human cognition and behaviors within a dynamic, simulated environment. Specifically, the intent of the ''Simulating Human Behavior for National Security Human Interactions'' project was to demonstrate initial simulated human modeling capability that realistically represents intra- and inter-group interaction behaviors between simulated humans and human-controlled avatars as they respond to their environment. Significant process was made towards simulating human behaviors through the development of a framework that produces realistic characteristics and movement. The simulated humans were created from models designed to be psychologically plausible by being based on robust psychological research and theory. Progress was also made towards enhancing Sandia National Laboratories existing cognitive models to support culturally plausible behaviors that are important in representing group interactions. These models were implemented in the modular, interoperable, and commercially supported Umbra{reg_sign} simulation framework

A generation apart? Youth and political participation in Britain

Conventional wisdom holds that young people in Britain are alienated from politics, with some claiming that this reflects a wider crisis of legitimacy that should be met by initiatives to increase citizenship. This article addresses these areas, presenting both panel survey and focus group data from first-time voters. It concludes that, contrary to the findings from many predominantly quantitative studies of political participation, young people are interested in political matters, and do support the democratic process. However they feel a sense of anti-climax having voted for the first time, and are critical of those who have been elected to positions of political power. If they are a generation apart, this is less to do with apathy, and more to do with their engaged scepticism about ‘formal’ politics in Britain