H2 production by the photocatalytic reforming of cellulose and raw biomass using Ni, Pd, Pt and Au on titania

Here, we report a method for sustainable hydrogen production using sunlight and biomass. It is shown that cellulose can be photoreformed to produce hydrogen, even in solid form, by use of metal-loaded titania photocatalysts. The experiments performed verified that the process is enabled by initial hydrolysis via glucose, which itself is shown to be efficiently converted to produce hydrogen by photocatalysis. Importantly, it is shown that not only precious metals such as Pt, Pd and Au can be used as the metal component, but also much more economic and less environmentally damaging Ni is effective. Even more importantly, we show for the first time, to the best our knowledge, that fescue grass as raw biomass can be effective for hydrogen production without significant pretreatment. This provides additional benefits for the efficiency of biomass hydrogen production, because fewer processing steps for the raw material are required than in the production of purer forms of cellulose, for example

Probing the dynamics and structure of confined benzene in MCM-41 based catalysts

A combination of Molecular Dynamics (MD) simulations and Quasielastic Neutron Scattering (QENS) experiments has been used to investigate the dynamics and structure of benzene in MCM-41 based catalysts. QENS experiments of benzene as both an unconfined liquid and confined in the catalyst Pt/MCM-41 find that the mobility of benzene decreases upon confinement as shown by the decreased diffusion coefficients. Complementary MD simulations on benzene in MCM-41 show agreement with the QENS experiments when using a novel fully flexible model of MCM-41. Structural information from the MD simulations show that benzene in MCM-41 has a significantly different structure from that of the bulk liquid; with benzene molecules closer together and no prefered orientation

Influence of Fluorination on the Solubilities of Carbon Dioxide, Ethane, and Nitrogen in 1‑n‑Fluoro-alkyl-3-methylimidazolium Bis(n‑fluoroalkylsulfonyl)amide Ionic Liquids

International audienceThe effect on gas solubilities of adding partially fluorinated alkyl side chains either on imidazolium-based cations or on bis(perfluoroalkylsulfonyl)amide anions was studied. The aim was to gain knowledge of the mechanisms of dissolution of gases in fluorinated ionic liquids and, if possible, to improve physical absorption of carbon dioxide in ionic liquids. We have determined experimentally, in the temperature range of 298–343 K and at pressures close to atmospheric pressure, the solubility and thermodynamics of solvation of carbon dioxide, ethane, and nitrogen in the ionic liquids 1-octyl-3-methylimidazolium bis[trifluoromethylsulfonyl]amide ([C8mim][NTf2]), 1-octyl-3-methylimidazolium bis[pentafluoroethylsulfonyl]amide ([C8mim][BETI]), 1-(3,3,4,4,5,5,6,6,7,7,8,8,8-tridecafluorooctyl)-3-methylimidazolium bis[trifluoromethylsulfonyl]amide ([C8H4F13mim][NTf2]), and 1-(3,3,4,4,5,5,6,6,7,7,8,8,8-tridecafluorooctyl)-3-methylimidazolium bis[pentafluoroethylsulfonyl]amide ([C8H4F13mim][BETI]). Ionic liquids with partial fluorination on the cation were found to exhibit higher carbon dioxide and nitrogen mole fraction solubilities but lower ethane solubilities, compared to those of their hydrogenated counterparts. Molecular simulation provided insights about the mechanisms of solvation of the different gases in the ionic liquids

Combined EXAFS, XRD, DRIFTS, and DFT Study of Nano Copper-Based Catalysts for CO2 Hydrogenation

Highly monodispersed CuO nanoparticles (NPs) were synthesized via continuous hydrothermal flow synthesis (CHFS) and then tested as catalysts for CO2 hydrogenation. The catalytic behavior of unsupported 11 nm sized nanoparticles from the same batch was characterized by diffuse reflectance infrared fourier transform spectroscopy (DRIFTS), extended X-ray absorption fine structure (EXAFS), X-ray diffraction (XRD), and catalytic testing, under CO2/H2 in the temperature range 25–500 °C in consistent experimental conditions. This was done to highlight the relationship among structural evolution, surface products, and reaction yields; the experimental results were compared with modeling predictions based on density functional theory (DFT) simulations of the CuO system. In situ DRIFTS revealed the formation of surface formate species at temperatures as low as 70 °C. DFT calculations of CO2 hydrogenation on the CuO surface suggested that hydrogenation reduced the CuO surface to Cu2O, which facilitated the formation of formate. In situ EXAFS supported a strong correlation between the Cu2O phase fraction and the formate peak intensity, with the maxima corresponding to where Cu2O was the only detectable phase at 170 °C, before the onset of reduction to Cu at 190 °C. The concurrent phase and crystallite size evolution were monitored by in situ XRD, which suggested that the CuO NPs were stable in size before the onset of reduction, with smaller Cu2O crystallites being observed from 130 °C. Further reduction to Cu from 190 °C was followed by a rapid decrease of surface formate and the detection of adsorbed CO from 250 °C; these results are in agreement with heterogeneous catalytic tests where surface CO was observed over the same temperature range. Furthermore, CH4 was detected in correspondence with the decomposition of formate and formation of the Cu phase, with a maximum conversion rate of 2.8% measured at 470 °C (on completely reduced copper), supporting the indication of independent reaction pathways for the conversion of CO2 to CH4 and CO that was suggested by catalytic tests. The resulting Cu NPs had a final crystallite size of ca. 44 nm at 500 °C and retained a significantly active surface

Interregionalism's impact on regional integration in developing countries: the case of Mercosur

This article examines the impact of interregionalism on deepening regional integration processes in non-European Union (EU) regions, specifically the Southern Common Market (Mercosur). It considers whether ‘capacity-building’ functions of interregionalism are present in EU–Mercosur relations. It argues that although negotiations for an association agreement might have helped Mercosur survive periods of severe crisis in the past, the terms of the agreement under negotiation were not sufficiently attractive to encourage deeper integration in Mercosur. Moreover, interregionalism cannot be expected to compensate for low institutionalization, nor substitute for weak political willingness to deepen integration. Ultimately, Mercosur alone can decide how far it wants to take its regional integration

Physical-Chemical Characterization of Binary Mixtures of 1-Butyl-1-methylpyrrolidinium Bis{(trifluoromethyl)sulfonyl}imide and Aliphatic Nitrile Solvents as Potential Electrolytes for Electrochemical Energy Storage Applications

In the scope of improving the energy and power densities of electrochemical double layer capacitors (EDLCs), the development of high performance electrolytes with enhanced operative voltages is imperative. The formulation of mixtures containing ionic liquids with organic molecular solvents is an important strategy in the pursuit of developing highly electrochemically stable and safe materials while retaining fast transport properties for high power applications. In this work, we report on the physical–chemical investigations into binary mixtures containing the ionic liquid 1-butyl-1-methylpyrrolidinium bis{(trifluoromethyl)sulfonyl}imide with one mononitrile solvent, butyronitrile, and two dinitrile solvents, glutaronitrile and adiponitrile, as potential electrolytes for EDLCs. The thermal, volumetric, and transport properties of the binary mixtures are investigated as functions of the electrolyte composition and temperature. Furthermore, the electrolyte composition which exhibits the highest conductivity for each of the binary mixtures was determined, and its electrochemical stability is reported using a glassy carbon macrodisk electrode

Complex Pediatric Elbow Injury: An Uncommon Case

BACKGROUND: There is paucity of literature describing complex elbow trauma in the pediatric population. We described a case of an uncommon pediatric elbow injury comprised of lateral condyle fracture associated with posterolateral dislocation of elbow. CASE PRESENTATION: A 12-year-old boy sustained a direct elbow trauma and presented with Milch type II lateral condyle fracture associated with posterolateral dislocation of elbow. Elbow dislocation was managed by closed reduction. The elbow stability was assessed under general anaesthesia, followed by open K-wiring for the lateral condylar fracture fixation. The patient had an uneventful recovery with an excellent outcome at 39 months follow-up. CONCLUSION: Complex pediatric elbow injuries are quite unusual to encounter, the management of such fractures can be technically demanding. Concomitant elbow dislocation should be managed by closed reduction followed by open reduction and internal fixation (K-wires or cannulated screws) of the lateral condyle fracture

Highly selective and solvent-dependent reduction of Nitrobenzene to N-phenylhydroxylamine, azoxybenzene, and aniline catalyzed by phosphino-modified polymer immobilized ionic liquid-stabilized AuNPs

Gold nanoparticles stabilized by phosphine-decorated polymer immobilized ionic liquids (AuNP@PPh2-PIILP) is an extremely efficient multiproduct selective catalyst for the sodium borohydride-mediated reduction of nitrobenzene giving N-phenylhydroxylamine, azoxybenzene, or aniline as the sole product under mild conditions and a very low catalyst loading. The use of a single nanoparticle-based catalyst for the partial and complete reduction of nitroarenes to afford three different products with exceptionally high selectivities is unprecedented. Under optimum conditions, thermodynamically unfavorable N-phenylhydroxylamine can be obtained as the sole product in near quantitative yield in water, whereas a change in reaction solvent to ethanol results in a dramatic switch in selectivity to afford azoxybenzene. The key to obtaining such a high selectivity for N-phenylhydroxylamine is the use of a nitrogen atmosphere at room temperature as reactions conducted under an inert atmosphere occur via the direct pathway and are essentially irreversible, while reactions in air afford significant amounts of azoxy-based products by virtue of competing condensation due to reversible formation of N-phenylhydroxylamine. Ultimately, aniline can also be obtained quantitatively and selectively by adjusting the reaction temperature and time accordingly. Introduction of PEG onto the polyionic liquid resulted in a dramatic improvement in catalyst efficiency such that N-phenylhydroxylamine could be obtained with a turnover number (TON) of 100 000 (turnover frequency (TOF) of 73 000 h–1, with >99% selectivity), azoxybenzene with a TON of 55 000 (TOF of 37 000 h–1 with 100% selectivity), and aniline with a TON of 500 000 (TOF of 62 500 h–1, with 100% selectivity). As the combination of ionic liquid and phosphine is required to achieve high activity and selectivity, further studies are currently underway to explore whether interfacial electronic effects influence adsorption and thereby selectivity and whether channeling of the substrate by the electrostatic potential around the AuNPs is responsible for the high activity. This is the first report of a AuNP-based system that can selectively reduce nitroarenes to either of two synthetically important intermediates as well as aniline and, in this regard, is an exciting discovery that will form the basis to develop a continuous flow process enabling facile scale-up