369 research outputs found
Generation of Porous Particle Structures using the Void Expansion Method
The newly developed "void expansion method" allows for an efficient
generation of porous packings of spherical particles over a wide range of
volume fractions using the discrete element method. Particles are randomly
placed under addition of much smaller "void-particles". Then, the void-particle
radius is increased repeatedly, thereby rearranging the structural particles
until formation of a dense particle packing.
The structural particles' mean coordination number was used to characterize
the evolving microstructures. At some void radius, a transition from an
initially low to a higher mean coordination number is found, which was used to
characterize the influence of the various simulation parameters. For structural
and void-particle stiffnesses of the same order of magnitude, the transition is
found at constant total volume fraction slightly below the random close packing
limit. For decreasing void-particle stiffness the transition is shifted towards
a smaller void-particle radius and becomes smoother.Comment: 9 pages, 8 figure
Strain-Rate Frequency Superposition (SRFS) - A rheological probe of structural relaxation in soft materials
The rheological properties of soft materials often exhibit surprisingly
universal linear and non-linear features. Here we show that these properties
can be unified by considering the effect of the strain-rate amplitude on the
structural relaxation of the material. We present a new form of oscillatory
rheology, Strain-Rate Frequency Superposition (SRFS), where the strain-rate
amplitude is fixed as the frequency is varied. We show that SRFS can isolate
the response due to structural relaxation, even when it occurs at frequencies
too low to be accessible with standard techniques.Comment: 4 pages, 4 figure
Single Hydrogel Particle Mechanics and Dynamics Studied by Combining Capillary Micromechanics with Osmotic Compression
Hydrogels can exhibit a remarkably complex response to external stimuli and show rich mechanical behavior. Previous studies of the mechanics of hydrogel particles have generally focused on their static, rather than dynamic, response, as traditional methods for measuring single particle response at the microscopic scale cannot readily measure time-dependent mechanics. Here, we study both the static and the time-dependent response of a single batch of polyacrylamide (PAAm) particles by combining direct contact forces, applied by using Capillary Micromechanics, a method where particles are deformed in a tapered capillary, and osmotic forces are applied by a high molecular weight dextran solution. We found higher values of the static compressive and shear elastic moduli for particles exposed to dextran, as compared to water (KDex≈63 kPa vs. Kwater≈36 kPa, and GDex≈16 kPa vs. Gwater≈7 kPa), which we accounted for, theoretically, as being the result of the increased internal polymer concentration. For the dynamic response, we observed surprising behavior, not readily explained by poroelastic theories. The particles exposed to dextran solutions deformed more slowly under applied external forces than did those suspended in water (τDex≈90 s vs. τwater≈15 s). The theoretical expectation was the opposite. However, we could account for this behaviour by considering the diffusion of dextran molecules in the surrounding solution, which we found to dominate the compression dynamics of our hydrogel particles suspended in dextran solutions.</p
Diffusing-wave spectroscopy in a standard dynamic light scattering setup
Diffusing-wave spectroscopy (DWS) extends dynamic light scattering measurements to samples with strong multiple scattering. DWS treats the transport of photons through turbid samples as a diffusion process, thereby making it possible to extract the dynamics of scatterers from measured correlation functions. The analysis of DWS data requires knowledge of the path length distribution of photons traveling through the sample. While for flat sample cells this path length distribution can be readily calculated and expressed in analytical form; no such expression is available for cylindrical sample cells. DWS measurements have therefore typically relied on dedicated setups that use flat sample cells. Here we show how DWS measurements, in particular DWS-based microrheology measurements, can be performed in standard dynamic light scattering setups that use cylindrical sample cells. To do so we perform simple random-walk simulations that yield numerical predictions of the path length distribution as a function of both the transport mean free path and the detection angle. This information is used in experiments to extract the mean-square displacement of tracer particles in the material, as well as the corresponding frequency-dependent viscoelastic response. An important advantage of our approach is that by performing measurements at different detection angles, the average path length through the sample can be varied. For measurements performed on a single sample cell, this gives access to a wider range of length and time scales than obtained in a conventional DWS setup. Such angle-dependent measurements also offer an important consistency check, as for all detection angles the DWS analysis should yield the same tracer dynamics, even though the respective path length distributions are very different. We validate our approach by performing measurements both on aqueous suspensions of tracer particles and on solidlike gelatin samples, for which we find our DWS-based microrheology data to be in good agreement with rheological measurements performed on the same samples
Molecular imaging by micro-CT: specific E-selectin imaging
The primary goal of this study was to design a fluorescent E-selectin-targeted iodine-containing liposome for specific E-selectin imaging with the use of micro-CT. The secondary goal was to correlate the results of micro-CT imaging with other imaging techniques with cellular resolution, i.e., confocal and intravital microscopy. E-selectin-targeted liposomes were tested on endothelial cells in culture and in vivo in HT-29 tumor-bearing mice (n = 12). The liposomes contained iodine (as micro-CT contrast medium) and fluorophore (as optical contrast medium) for confocal and intravital microscopy. Optical imaging methods were used to confirm at the cellular level, the observations made with micro-CT. An ischemia-reperfusion model was used to trigger neovessel formation for intravital imaging. The E-selectin-targeted liposomes were avidly taken up by activated endothelial cells, whereas nontargeted liposomes were not. Direct binding of the E-selectin-targeted liposomes was proved by intravital microscopy, where bright spots clearly appeared on the activated vessels. Micro-CT imaging also demonstrated accumulation of the targeted lipsomes into subcutaneous tumor by an increase of 32 ± 8HU. Hence, internalization by activated endothelial cells was rapid and mediated by E-selectin. We conclude that micro-CT associated with specific molecular contrast agent is able to detect specific molecular markers on activated vessel walls in viv
Combining cardiac magnetic resonance and computed tomography coronary calcium scoring: added value for the assessment of morphological coronary disease?
To investigate prospectively, in patients with suspicion of coronary artery disease (CAD), the added value of coronary calcium scoring (CS) as adjunct to cardiac magnetic resonance (CMR) for the diagnosis of morphological coronary stenosis in comparison to catheter angiography (CA). Sixty consecutive patients (8 women; 64±10years) referred to CA underwent CMR (1.5 T) including perfusion and late gadolinium-enhancement imaging as well as CS with computed tomography. Diagnostic performance was evaluated for CMR and CS separately, and for both methods combined, with CA as reference standard. Best CS threshold combined with a specificity >90% to predict significant stenosis in patients without abnormalities on CMR was determined from receiver operator characteristics (ROC) analysis. Abnormal CMR results were considered to indicate significant stenosis regardless of CS; CS above threshold reclassified patients to have CAD regardless of CMR. CA identified 104/960 (11%) coronary segments with coronary artery stenosis >50% in 36/60 (60%) patients. ROC revealed an area-under-the-curve of 0.83 (95%CI: 0.68-0.99) with the best CS threshold of 495 Agatston score (sensitivity 50%). CMR depicted 128/960 (13%) myocardial segments with abnormalities in 31/60 (52%) patients. Sensitivity, specificity, negative (NPV) and positive predictive value (PPV) of CMR were 78, 88, 72 and 90%. When adding CS to CMR, sensitivity and NPV increased to 89 and 83%, while specificity and PPV slightly decreased to 83 and 89%. Accuracy of the combined approach (87%) was significantly (P<0.05) higher than that of CMR (82%) alone. Adding CS to CMR improves the accuracy for the detection of morphological CA
A Experiência da Construção do Sujeito Ético-polÃtico nos Espaços do Fórum Bem Maior
RESUMO
Esta dissertação discute a construção do sujeito ético-polÃtico nos espaços de um fórum de desenvolvimento comunitário, chamado Bem Maior, localizado na cidade de Vitória - ES. A partir da narrativa de algumas experiências vivenciadas junto ao Fórum Bem Maior e com base nas entrevistas que realizamos com 16 lideranças atuantes nesse espaço, buscamos acompanhar o processo de constituição ético-polÃtica da subjetividade engendrada quando do encontro com a alteridade.
Recorremos, principalmente, ao pensamento de Michel Foucault, utilizando alguns de seus principais conceitos como ferramentas teóricas de modo a problematizar a relação entre polÃtica e ética. Isso possibilitou-nos pensar a experiência polÃtica situada exatamente na trama articulada entre o poder e a resistência, tomada nos termos éticos do cuidado de si.
Esse estudo pretendeu ressaltar o componente ético de constituição da subjetividade como indispensável para a construção do sujeito polÃtico como cidadão e a possibilidade de limitação de relações de dominação e sujeição por meio de um exercÃcio ético do cuidado e cultivo da liberdade.
Palavras-chave: Cidadania; Ética; PolÃtica
Magnetically actuated glaucoma drainage device for regulating intraocular pressure after implantation
The key risk factor for glaucoma is increased intraocular pressure (IOP). Glaucoma drainage devices implanted in the eye can reduce IOP and thus stop disease progression. However, most devices currently used in clinical practice are passive and do not allow for postsurgical IOP control, which may result in serious complications such as hypotony (i.e., excessively low IOP). To enable noninvasive IOP control, we demonstrate a novel, miniature glaucoma implant that will enable the repeated adjustment of the hydrodynamic resistance after implantation. This is achieved by integrating a magnetic microvalve containing a micropencil-shaped plug that is moved using an external magnet, thereby opening or closing fluidic channels. The microplug is made from biocompatible poly(styrene-block-isobutylene-block-styrene) (SIBS) containing iron microparticles. The complete implant consists of an SIBS drainage tube and a housing element containing the microvalve and fabricated with hot embossing using femtosecond laser-machined glass molds. Using in vitro and ex vivo microfluidic experiments, we demonstrate that when the microvalve is closed, it can provide sufficient hydrodynamic resistance to overcome hypotony. Valve function is repeatable and stable over time. Due to its small size, our implant is a promising, safe, easy-to-implant, minimally invasive glaucoma surgery device. [Figure not available: see fulltext.]</p
Capillary micromechanics: Measuring the elasticity of microscopic soft objects
We present a simple method for accessing the elastic properties of
microscopic deformable particles. This method is based on measuring the
pressure-induced deformation of soft particles as they are forced through a
tapered glass microcapillary. It allows us to determine both the compressive
and the shear modulus of a deformable object in one single experiment.
Measurements on a model system of poly-acrylamide microgel particles exhibit
excellent agreement with measurements on bulk gels of identical composition.
Our approach is applicable over a wide range of mechanical properties and
should thus be a valuable tool for the characterization of a variety of soft
and biological materials
- …