Early detection of corrosion activity in reinforced concrete slab by AE technique

Chloride induced corrosion of steel reinforcement in concrete is the main cause of damage to concrete structures in marine, or structures exposed to de-icing salt environments. The need for early detection of corrosion in reinforced concrete structures is widely acknowledged in corrosion health monitoring for strategic civil engineering projects. This paper summarizes results from a laboratory experiment, using Acoustic Emission (AE) technique, regarding early detection of corrosion in reinforced concrete slabs that are exposed to chloride. The Results showed that while AE was able to determine the initiation of corrosion in reinforced concrete slab, Half-cell potential (HCP) was not able to detect it at the early stage of corrosion

The preparation and characterization of chitosan/poly (vinyl alcohol) blended films : mechanical, thermal and surface investigations

In this study, blends of chitosan (CS) and polyvinyl alcohol (PVA) (CS/PVA) having various proportions were prepared and characterized by universal mechanical tester, the differential scanning calorimetry (DSC) and contact angle measurements. Studying the mechanical properties of the films showed that blending improved the tensile strength, which increased with increasing PVA content up to 40% while the elongation% at break of the blends was decreased compared to that of the pure components. The obtained results of DSC suggested that some interaction between chitosan and PVA mostly took place. Static water contact angle measurements showed an improvement in the wettability of the obtained films

Physico-mechanical properties of polymer concrete containing micro-filler of palm oil fuel ash

Objective of this study is to present a research conducted on ground (fine) and unground (coarse) POFA in polymer concrete (PC) followed by determination on the physico-mechanical properties of PC. Physical properties of micro-fillers and mechanical properties of produced PCs were characterized. Calcium carbonate and silica sand were also used as micro-fillers for comparison purpose. The samples were subjected to compression and flexural. Morphology images of the particles were captured under morphology test to support the findings. Results showed that fine POFA micro-filler has a highly promising potential in becoming PC filler compared to coarse micro-filler. Additionally, its produced PC had comparable strength to PC with calcium carbonate. From the strength development and sustainability stand point, fine POFA has demonstrated its capability to produce quality and sustainable P

Predicting the capability of oxidized cnw adsorbents for the remediation of copper under optimal operating conditions using rsm and ann models

Metal pollutants such as copper released into the aqueous environment have been increasing as a result of anthropogenic activities. Adsorption-based treatment technologies offer opportunities to remediate metal pollutants from municipal and industrial wastewater effluent. The aim of this work was to evaluate the capability of modified cellulose nanowhisker (CNW) adsorbents for the remediation of copper from water matrices under realistic conditions using response surface methodology (RSM) and artificial neural network (ANN) models. Considerations for design and application to remediate Cu(II) from wastewater by developing a continuous flow experiment are described in this study. However, the physical structure of modified CNW adsorbents renders them unsuitable for use in column operation. Therefore, a more detailed study of the mechanical properties of CNW adsorbents would be necessary in order to improve the strength and stability of the adsorbents. This work has demonstrated that modified CNW are promising adsorbents to remediate copper from water matrices under realistic conditions including wastewater complexity and variability. The use of models to predict the test parameter system and account for matrix variability when evaluating CNW adsorbents for remediating Cu from a real-world wastewater matrix may also provide the foundation for assessing other treatment technologies in the future

Green Technology Policy as a Driver for Change Sustainability Practices among the Community in Melaka

The suggestion for people to change their minds towards a developed society in line with the idea of implementing green technology urban development is a necessity to achieve sustainable development. Therefore, this study attempts to analyze the issues related to the need to change society’s practices so that society is able to face the cultural environment of society based on green technology towards sustainability. This study uses a quantitative method that is using by a questionnaire instrument involving a total of 308 respondents. The results of the analysis found that those living in areas involved with green technology were higher their awareness towards green lifestyle compared to communities outside the green technology declaration area. In general, there are various challenges in the implementation of green technology urban development in Melaka, especially in changing the lifestyle of the community towards the ideology of sustainable development based on green technology

A study of reverse osmosis reject water at Bukit Gambir, Tangkak Haemodialysis Centre

Water is categorized by their few aspects according to the specific feature and it function usage in a certain compatible condition. Yet with rapidly population growth increasing around the world by about 85 million per year, the accessibility for fresh water supply per persons keep declining [1]. The increasing clean water demand causes the increasing environmental risks, costs and economic exploitation as it may disturb surrounding nature which leads into the more distant sources or greater depth. At this state, the minimization of waste water produce should be focused on to prevent it become worsen

Awareness on 3R practice: a case study at UTHM Pagoh residential college

Solid waste can be defined as any scrap material; or unwanted surplus substance; or rejected products arising from the application of any process [1]. This also includes any substance required to be disposed of as being broken, worn out, contaminated or otherwise spoiled. Over the years, the problems of solid waste generation are increasing all over the world. In the year 2016, cities around the world generated 2.01 billion tonnes of solid waste, amounting to a footprint of 0.74 kilograms per person per day [2]. With rapid population growth and urbanisation, the annual waste generation is expected to increase to 3.4 billion tonnes by year 2050. The same trend can be seen in Malaysia. The waste generation rate in this country has been steadily increasing from 12.3 million tonnes in year 2013 to 13.9 million tonnes in year 2018 [3]. This amount is expected to increase to 14.4 million tonnes by year 2020

Knowledge and Attitudes of Population Towards HIV/Aids in Four States, Sudan

Back ground: HIV/AIDS is a public health problem in the Sudan. The country is the most severely affected in North Africa and the Middle East with an estimated 500,000 people living with HIV/AIDS. The objectives of the study were to determine knowledge and attitude of the localpopulation in selected states about HIV/ AIDS and to determine the relation between knowledge and attitude towards HIV/AIDS and associated social factors.Methodology: Design was descriptive, cross-sectional, community- based study conducted in Gezira, Sinnar, River Nile and Northern states. The population was those found in their settings during the visits in April 2009. Both sexes were enrolled and children below the age of 15 years ofboth sexes were excluded from the study. Data were collected by a pre- coded and pre -tested questionnaire and were analyzed by the computer using SPSS, version 13, soft ware.Results: Knowledge of the population in the selected four states about HIV/AIDS was favorable (73%). Tolerant attitude towards HIV-infected people was low (40%). Results showed that males acquired better knowledge than females (76.2% versus 71.8%) but females were more tolerant towards HIV/AIDS than males (42% versus 37.4%). Results showed that HIV/AIDS Knowledge increased as the educational level increased. Level of knowledge was higher among university graduates (92.6%) followed by basic and secondary (76.7%). Illiterates acquired the least level of knowledge (42.4%). The study showed that tolerance of population towards PLWHA increased according to the level of education. The university graduated was more tolerant (55.1%) than thebasic/secondary (40.5%) and the illiterates (21.9%). It was shown that the single population was more tolerant towards PLWHA, followed by the married, the divorced and the widowed constituting 41.6%, 40.4%, 31.4% and 25% respectively.Conclusion: The study concluded that, level of knowledge about HIV/AIDS of the population in the selected states was good. Level of knowledge among males, the working force and the single population was higher than the females, those without jobs and the married. Level of HIV/AIDSknowledge increased according to the level of education, was higher among university graduates followed by basic / secondary and Illiterates. Attitude of the population in the selected states towards people living with HIV/AIDS “PLWHA” was low, only 40% had more tolerant attitude.Females, the highly educated and the working population were more tolerant towards HIV/AIDS than males, the less educated, and the nonworking population

Modeling of Single Bay Precast Residential House Using Ruaumoko 2D Program

Precast residential houses are normally constructed in Malaysia using precast shear-key wall panel and precast wall panel are designed using BS8110 where there is no provision for earthquake. However, the safety of this house under moderate and strong earthquake is still questionable. Consequently, the full-scale of residential house are designed, constructed, tested and analyzed under in-plane lateral cyclic loading. Hysteresis loops are plotted based on the experimental work and compared with modeling of hysteresis loops using HYSTERES in RUAUMOKO 2D program. Modified Takeda hysteresis model is chosen to behave a similar pattern with experimental work. This program will display the earthquake excitations, spectral displacements, pseudo spectral acceleration, and deformation shape of the structure. It can be concluded that this building is suffering severe cracks and damage under moderate and severe earthquake