The electromagnetic environment in CFC structures

Extensive measurements of induced voltages and currents were made using a CFC (carbon fiber composites) horizontal stabilizer from the A320 as a test bed. The work was done to investigate the efficacy of various protection schemes to reduce the magnitudes of the induced voltages and validate a computer program INDCAL. Results indicate that a good understanding of the various induced voltage mechanisms including the long wave effect due to current redistribution was obtained

Solar Irradiance Variability and Climate

The brightness of the Sun varies on all time scales on which it has been observed, and there is increasing evidence that it has an influence on climate. The amplitudes of such variations depend on the wavelength and possibly on the time scale. Although many aspects of this variability are well established, the exact magnitude of secular variations (going beyond a solar cycle) and the spectral dependence of variations are under discussion. The main drivers of solar variability are thought to be magnetic features at the solar surface. The climate reponse can be, on a global scale, largely accounted for by simple energetic considerations, but understanding the regional climate effects is more difficult. Promising mechanisms for such a driving have been identified, including through the influence of UV irradiance on the stratosphere and dynamical coupling to the surface. Here we provide an overview of the current state of our knowledge, as well as of the main open questions

Measurements of some parameters of thermal sparks with respect to their ability to ignite aviation fuel/air mixtures

A method used to generate thermal sparks for experimental purposes and methods by which parameters of the sparks, such as speed, size, and temperature, were measured are described. Values are given of the range of such parameters within these spark showers. Titanium sparks were used almost exclusively, since it is particles of this metal which are found to be ejected during simulation tests to carbon fiber composite (CFC) joints. Tests were then carried out in which titanium sparks and spark showers were injected into JP4/(AVTAG F40) mixtures with air. Single large sparks and dense showers of small sparks were found to be capable of causing ignition. Tests were then repeated using ethylene/air mixtures, which were found to be more easily ignited by thermal sparks than the JP4/ air mixtures

Assessing the relationship between spectral solar irradiance and stratospheric ozone using Bayesian inference

We investigate the relationship between spectral solar irradiance (SSI) and ozone in the tropical upper stratosphere. We find that solar cycle (SC) changes in ozone can be well approximated by considering the ozone response to SSI changes in a small number individual wavelength bands between 176 and 310 nm, operating independently of each other. Additionally, we find that the ozone varies approximately linearly with changes in the SSI. Using these facts, we present a Bayesian formalism for inferring SC SSI changes and uncertainties from measured SC ozone profiles. Bayesian inference is a powerful, mathematically self-consistent method of considering both the uncertainties of the data and additional external information to provide the best estimate of parameters being estimated. Using this method, we show that, given measurement uncertainties in both ozone and SSI datasets, it is not currently possible to distinguish between observed or modelled SSI datasets using available estimates of ozone change profiles, although this might be possible by the inclusion of other external constraints. Our methodology has the potential, using wider datasets, to provide better understanding of both variations in SSI and the atmospheric response.Comment: 21 pages, 4 figures, Journal of Space Weather and Space Climate (accepted), pdf version is in draft mode of Space Weather and Space Climat

Assessment of base capacity of open-ended tubular piles installed by the Rotary Cutting Press-in method

The ‘press-in’ method is a piling technique that installs piles with a static jacking force while obtaining a reaction force from previously installed piles. The applicable ground conditions of this method have been significantly expanded by the ‘Rotary Cutting Press-in (RCP)’ method, whereby a vertical jacking force and a torque are applied simultaneously onto a pile with cutting teeth on its base while water is injected around the pile base. In this paper, a method to estimate the base capacity of RCP piles is proposed based on UWA-05 framework. The proposed method utilizes CPT or SPT results as input parameters and estimates the plugging condition (Incremental Filling Ratio, IFR) from these results. Four static load tests on open-ended RCP piles were shown to be well-predicted by the proposed method in terms of the base capacity, regardless of the embedment depth into a bearing stratum.Giken Lt

Optical studies of two LMC X-ray transients : RX J0544.1-7100 and RX J0520.5-6932

We report observations which confirm the identities of the optical counterpart to the transient sources RX J0544.1-7100 and RX J0520.5-6932. The counterparts are suggested to be a B-type stars. Optical data from the observations carried out at ESO and SAAO, together with results from the OGLE data base, are presented. In addition, X-ray data from the RXTE all-sky monitor are investigated for long term periodicities. A strong suggestion for a binary period of 24.4d is seen in RX J0520.5-6932 from the OGLE data.Comment: 6 pages, 7 figure

Implementation of a local principal curves algorithm for neutrino interaction reconstruction in a liquid argon volume

A local principal curve algorithm has been implemented in three dimensions for automated track and shower reconstruction of neutrino interactions in a liquid argon time projection chamber. We present details of the algorithm and characterise its performance on simulated data sets.Comment: 14 pages, 17 figures; typing correction to Eq 5, the definition of the local covariance matri

Developing a partcipatory approach to seed production and varietal selection

The performance of UK winter wheat varieties was tested under organic conditions involving farmer participation. Three breadmaking varieties (Hereward, Solstice and Xi19) and their mixture (1:1:1) were grown at 19 UK farms in 2003/04 and 2004/05. The variability of productivity on organic farms was illustrated with more variation among farm sites than among varieties. Seed health was generally high over all sites. Although the trials were successful, more time was needed at project initiation to improve farmer involvement. Some farmers expected more researcher visits, and were reticent about assessing the trials themselves. In contrast, some participants valued the variety performance data on their farms particularly when related to that of other growers. The balance between the goals of the researchers relative to the farmers needs to be defined at project initiation

A Practical C Language Compiler/Optimizer for Real-Time Implementations on a Family of Floating Point DSPs

Digital signal processors (DSPs) have traditionally been used in real-time applications with very high data throughput. For this reason, system designers have been reluctant to accept the degradation in performance inherent in machine code compiled from high-level languages such as C. The problem is compounded by the fact that DSPs use pipelined architectures to achieve their high data throughput, resulting in hazards and latencies between instructions. Simple compiler implementation cannot take advantage of latent instructions, resulting in a conservative and inefficient executable program. This problem has been addressed in the C compiler package for the AT&T WE DSP32 by the addition of a postoptimizer and an extensive application library. The authors give an overview of the DSP32 family architecture, describe the operation of the basic compiler and optimization strategies, and provide an example of the use of the compile