886 research outputs found
Multivariate Analysis, Retrieval, and Storage System (MARS). Volume 6: MARS System - A Sample Problem (Gross Weight of Subsonic Transports)
The Mars system is a tool for rapid prediction of aircraft or engine characteristics based on correlation-regression analysis of past designs stored in the data bases. An example of output obtained from the MARS system, which involves derivation of an expression for gross weight of subsonic transport aircraft in terms of nine independent variables is given. The need is illustrated for careful selection of correlation variables and for continual review of the resulting estimation equations. For Vol. 1, see N76-10089
Multivariate Analysis, Retrieval, and Storage System (MARS). Volume 1: MARS System and Analysis Techniques
A method for rapidly examining the probable applicability of weight estimating formulae to a specific aerospace vehicle design is presented. The Multivariate Analysis Retrieval and Storage System (MARS) is comprised of three computer programs which sequentially operate on the weight and geometry characteristics of past aerospace vehicles designs. Weight and geometric characteristics are stored in a set of data bases which are fully computerized. Additional data bases are readily added to the MARS system and/or the existing data bases may be easily expanded to include additional vehicles or vehicle characteristics
Highly sensitive alkane odour sensors based on functionalised gold nanoparticles
We deposit dense, ordered, thin films of Au-dodecanethiol core/shell nanoparticles by the Langmuir-Schafer (LS) printing method, and find that their resistance at ambient temperature responds selectively and sensitively to alkane odours. Response is a rapid resistance increase due to swelling, and is strongest for alkane odours where the alkane chain is similar in length to the dodecane shell. For decane odours, we find a response to concentrations as low as 15 ppm, about 600 times below the lower explosive limit. Response is weaker, but still significant, to aromatic odours (e.g. Toluene, Xylene), while potential interferants such as polar and/or hydrogen-bonding odours (e.g. alcohols, ketones, water vapour) are somewhat rejected. Resistance is weakly dependent on temperature, and recovers rapidly and completely to its original value within the error margin of measurement. (C) 2011 Elsevier B.V. All rights reserved
Multivariate Analysis, Retrieval, and Storage System (MARS). Volume 4: Turbojet and Turbofan Data Base (By Engine)
A partial listing of turbojet and turbofan engine specifications data, as provided by the MARS (Multivariable Data Analysis, Retrieval, and Storage) system, was given for a number of engines
Realization of an Inductance Scale Traceable to the Quantum Hall Effect Using an Automated Synchronous Sampling System
In this paper, the realization of an inductance scale from 1~H to 10~H
for frequencies ranging between 50~Hz to 20~kHz is presented. The scale is
realized directly from a series of resistance standards using a fully automated
synchronous sampling system. A careful systematic characterization of the
system shows that the lowest uncertainties, around 12~H/H, are obtained
for inductances in the range from 10~mH to 100~mH at frequencies in the kHz
range. This new measurement system which was successfully evaluated during an
international comparison, provides a primary realization of the henry, directly
traceable to the quantum Hall effect. An additional key feature of this system
is its versatility. In addition to resistance-inductance (R-L) comparison, any
kind of impedances can be compared: R-R, R-C, L-L or C-C, giving this sampling
system a great potential of use in many laboratories around the world
Regular Strategies in Pushdown Reachability Games
International audienceWe show that positional winning strategies in pushdown reachability games can be implemented by deterministic finite state au-tomata of exponential size. Such automata read the stack and control state of a given pushdown configuration and output the set of winning moves playable from that position. This result can originally be attributed to Kupferman, Piterman and Vardi using an approach based on two-way tree automata. We present a more direct approach that builds upon the popular saturation technique. Saturation for analysing pushdown systems has been successfully implemented by Moped and WALi. Thus, our approach has the potential for practical applications to controller-synthesis problems
Combined inkjet printing and infrared sintering of silver nanoparticles using a swathe-by-swathe and layer-by-layer approach for 3-dimensional structures
Despite the advancement of additive manufacturing (AM)/3-dimensional (3D) printing, single-step fabrication of multifunctional parts using AM is limited. With the view of enabling multifunctional AM (MFAM), in this study, sintering of metal nanoparticles was performed to obtain conductivity for continuous line inkjet printing of electronics. This was achieved using a bespoke three dimensional (3D) inkjet-printing machine, JETx®, capable of printing a range of materials and utilizing different post processing procedures to print multi-layered 3D structures in a single manufacturing step. Multiple layers of silver were printed from an ink containing silver nanoparticles (AgNPs) and infra-red sintered using a swathe-by-swathe (SS) and layer-by-layer sintering (LS) regime. The differences in the heat profile for the SS and LS was observed to influence the coalescence of the AgNPs. Void percentage of both SS and LS samples was higher towards the top layer than the bottom layer due to relatively less IR exposure in the top than the bottom. The results depicted a homogeneous microstructure for LS of AgNPs and showed less deformation compared to the SS. Electrical resistivity of the LS tracks (13.6 ± 1μΩ cm) was lower than the SS tracks (22.5 ± 1 μΩ cm). This study recommends the use of LS method to sinter the AgNPs to obtain a conductive track in 25% less time than SS method for MFAM
A Three-Point Cosmic Ray Anisotropy Method
The two-point angular correlation function is a traditional method used to
search for deviations from expectations of isotropy. In this paper we develop
and explore a statistically descriptive three-point method with the intended
application being the search for deviations from isotropy in the highest energy
cosmic rays. We compare the sensitivity of a two-point method and a
"shape-strength" method for a variety of Monte-Carlo simulated anisotropic
signals. Studies are done with anisotropic source signals diluted by an
isotropic background. Type I and II errors for rejecting the hypothesis of
isotropic cosmic ray arrival directions are evaluated for four different event
sample sizes: 27, 40, 60 and 80 events, consistent with near term data
expectations from the Pierre Auger Observatory. In all cases the ability to
reject the isotropic hypothesis improves with event size and with the fraction
of anisotropic signal. While ~40 event data sets should be sufficient for
reliable identification of anisotropy in cases of rather extreme (highly
anisotropic) data, much larger data sets are suggested for reliable
identification of more subtle anisotropies. The shape-strength method
consistently performs better than the two point method and can be easily
adapted to an arbitrary experimental exposure on the celestial sphere.Comment: Fixed PDF erro
Changing platforms without stopping the train: experiences of data management and data management systems when adapting platform protocols by adding and closing comparisons.
Background There is limited research and literature on the data management challenges encountered in multi-arm, multi-stage platform and umbrella protocols. These trial designs allow both (1) seamless addition of new research comparisons and (2) early stopping of accrual to individual comparisons that do not show sufficient activity. FOCUS4 (colorectal cancer) and STAMPEDE (prostate cancer), run from the Medical Research Council Clinical Trials Unit (CTU) at UCL, are two leading UK examples of clinical trials implementing adaptive platform protocol designs. To date, STAMPEDE has added five new research comparisons, closed two research comparisons following pre-planned interim analysis (lack of benefit), adapted the control arm following results from STAMPEDE and other relevant trials, and completed recruitment to six research comparisons. FOCUS4 has closed one research comparison following pre-planned interim analysis (lack of benefit) and added one new research comparison, with a number of further comparisons in the pipeline. We share our experiences from the operational aspects of running these adaptive trials, focusing on data management.Methods We held discussion groups with STAMPEDE and FOCUS4 CTU data management staff to identify data management challenges specific to adaptive platform protocols. We collated data on a number of case report form (CRF) changes, database amendments and database growth since each trial began.Discussion We found similar adaptive protocol-specific challenges in both trials. Adding comparisons to and removing them from open trials provides extra layers of complexity to CRF and database development. At the start of an adaptive trial, CRFs and databases must be designed to be flexible and scalable in order to cope with the continuous changes, ensuring future data requirements are considered where possible. When adding or stopping a comparison, the challenge is to incorporate new data requirements while ensuring data collection within ongoing comparisons is unaffected. Some changes may apply to all comparisons; others may be comparison-specific or applicable only to patients recruited during a specific time period. We discuss the advantages and disadvantages of the different approaches to CRF and database design we implemented in these trials, particularly in relation to use and maintenance of generic versus comparison-specific CRFs and databases. The work required to add or remove a comparison, including the development and testing of changes, updating of documentation, and training of sites, must be undertaken alongside data management of ongoing comparisons. Adequate resource is required for these competing data management tasks, especially in trials with long follow-up. A plan is needed for regular and pre-analysis data cleaning for multiple comparisons that could recruit at different rates and periods of time. Data-cleaning activities may need to be split and prioritised, especially if analyses for different comparisons overlap in time.Conclusions Adaptive trials offer an efficient model to run randomised controlled trials, but setting up and conducting the data management activities in these trials can be operationally challenging. Trialists and funders must plan for scalability in data collection and the resource required to cope with additional competing data management tasks
A feasibility and pilot randomised dismantling trial of the efficacy of self-as-context during acceptance and commitment therapy
The comparative clinical utility of the components of the psychological flexibility model of acceptance and commitment therapy (ACT) have not been equally evaluated. This study therefore conducted a feasibility and pilot two-arm dismantling trial by quarantining the self-as-context component. Sixteen participants were randomised to either 8 sessions of protocol-based ACT (Full-ACT) or 8 sessions of protocol-based ACT minus self-as-context (ACT-SAC). Process measures (flexibility and decentring) were taken at start of treatment, end of treatment, and at 6-week follow-up. Clinical outcome measures (functioning, anxiety, and depression) were collected on a session-by-session basis. Randomisation was well tolerated, all measures were completed, both interventions were competently delivered, and one adverse effect occurred in the full-ACT arm. Ten participants attended all 8 sessions creating a dropout rate of 37.50%. Clinical change appeared linear in both treatments and that treatment gains were maintained. Findings suggest that a full trial is possible and sample size calculations and methodological improvements are provided for this
- …