Long-term TNT and DNT contamination: 1-D modeling of natural attenuation in the vadose zone: case study, Portugal

The vadose zone of a trinitrotoluene (TNT) and dinitrotoluene (DNT) contaminated site was investigated to assess the mobility of those explosives under natural conditions. Located in the left margin of the River Tejo Basin, Portugal, the site is located on unconsolidated sediments. Wastewaters associated with the 50-year explosives production were disposed in excavated ponds, from where water would infiltrate and pollute the unsaturated and saturated parts of the local aquifers. Two boreholes were drilled to 9 m depth in such a former waste pond to investigate the contaminant's fate in the vadose zone. Sediment samples were taken every 1-2 m for analysis of the polynitroaromatics (p-NACs) and organic volatile compounds, pH, organic carbon content, cation exchange capacity and grain size analysis. The main contaminant was TNT representing >70 % of the total p-NACs concentration that peaked approximately 7 mg/kg in one borehole, even if the median in both boreholes was of similar to 1 mg/kg. DNT was 4-30 % of the total p-NACs and nitrotoluene (NT), up to 5 %. No other (volatile) organic compound was detected. The predominance of TNT as the main contaminant implies that any natural mass reduction has been inefficient to clean the site. Several 1-D model simulations of p-NACs cleaning of the vadose zone under natural conditions indicated that the most probable scenario of combined advection and partitioning will only remove TNT after 10's of years, whereas DNT and NT will hardly be removed. Such low concentrations and long times for the p-NACs removal, suggest that by now those compounds have been washed-out to a level below standard limits

The Science Performance of JWST as Characterized in Commissioning

This paper characterizes the actual science performance of the James Webb Space Telescope (JWST), as determined from the six month commissioning period. We summarize the performance of the spacecraft, telescope, science instruments, and ground system, with an emphasis on differences from pre-launch expectations. Commissioning has made clear that JWST is fully capable of achieving the discoveries for which it was built. Moreover, almost across the board, the science performance of JWST is better than expected; in most cases, JWST will go deeper faster than expected. The telescope and instrument suite have demonstrated the sensitivity, stability, image quality, and spectral range that are necessary to transform our understanding of the cosmos through observations spanning from near-earth asteroids to the most distant galaxies

The James Webb Space Telescope Mission

Twenty-six years ago a small committee report, building on earlier studies, expounded a compelling and poetic vision for the future of astronomy, calling for an infrared-optimized space telescope with an aperture of at least $4m$. With the support of their governments in the US, Europe, and Canada, 20,000 people realized that vision as the $6.5m$ James Webb Space Telescope. A generation of astronomers will celebrate their accomplishments for the life of the mission, potentially as long as 20 years, and beyond. This report and the scientific discoveries that follow are extended thank-you notes to the 20,000 team members. The telescope is working perfectly, with much better image quality than expected. In this and accompanying papers, we give a brief history, describe the observatory, outline its objectives and current observing program, and discuss the inventions and people who made it possible. We cite detailed reports on the design and the measured performance on orbit.Comment: Accepted by PASP for the special issue on The James Webb Space Telescope Overview, 29 pages, 4 figure

Reduction Of Polyhalogenated Methanes By Surface-Bound Fe(Ii) In Aqueous Suspensions Of Iron Oxides

Uptake of ferrous iron from aqueous solution by iron oxides results in the formation of a variety of reactive surface species capable of reducing polyhalogenated methanes (PHMs). Pseudo-first-order reaction rate constants, kobs, of PHMs increased in the order CHBrCl2 \u3c CHBr2Cl \u3c CHBr3 \u3c CCl4 \u3c CFBr3 \u3c CBrCl3 \u3c CBr2Cl2. The kobs values increased with the exposure time, teq, of Fe(II) to suspended iron oxides which was attributed to the rearrangement of initially sorbed Fe(II) species to more reactive surface species with time. At pH 7.2, the kobs values of PHMs also increased with the concentration of surface-bound ferrous iron, Fe(II)sorb, particularly when Fe(II)tot was increased to concentrations where surface precipitation becomes likely. At fixed total Fe(II) concentrations, kobs values increased exponentially with pH. The highest reactivities were associated with pH conditions where surface precipitation of Fe(II) is expected. Fe(II)sorb and pH, however, had opposite effects on the product formation of PHMs. At pH 7.2, the formation of formate from CX4 (X = Cl, Br) increased with Fe(II)sorb, whereas increasing pH favored the formation of CHX3. The ratio of halogenated products and formate formed is indicative of the relative importance of initial one- or two-electron-transfer processes, respectively, and was found to depend on the type of iron oxide mineral also. Our data form a basis to assess the importance of chemical reactions in natural attenuation processes of PHMs in environmental systems under iron-reducing conditions

Reactivity of Fe(II) Species Associated with Clay Minerals

Mineral-bound Fe(II) species represent important natural reductants of pollutants in the anaerobic subsurface. At clay minerals, three types of Fe(II) species in fundamentally different chemical environments may be present simultaneously, i.e., structural Fe(II), Fe(II) complexed by surface hydroxyl groups, and Fe(II) bound by ion exchange. We investigated the accessibility and reactivity of these three types of Fe(II) species in suspensions of two different clay minerals containing either ferrous iron-bearing nontronite or iron-free hectorite. Nitroaromatic compounds (NACs) exhibiting different sorption behavior on clays were used to probe the reactivity of the various types of reduced iron species. The clay treatment allowed for a preparation of nontronite and hectorite surfaces with Fe(II) adsorbed by surface hydroxyl groups at the edge surfaces. Furthermore, hectorite suspensions with additional Fe(II) bound to the ion exchange sites at the basal siloxane surfaces were set up. We found that both structural Fe(II) and Fe(II) complexed by surface hydroxyl groups of nontronite reduced the NACs to anilines. An electron balance revealed that more than 10% of the total iron in nontronite was reactive Fe(II). Fe(II) bound by ion exchange did not contribute to the observed reduction of NACs. Reversible adsorption of the NACs at the basal siloxane surface of the clays strongly retarded NAC reduction, even in the presence of high concentrations of Fe(II) bound by ion exchange to the basal siloxane surfaces. Our work shows that in natural systems a fraction of the total Fe(II) present on clays may contribute to the pool of highly reactive Fe(II) species in the subsurface. Furthermore, this work may help to distinguish between Fe(II) species of different reactivity regarding pollutant reduction. Although structural iron in clays represents only a small fraction of the total iron pool in soils and aquifers, reactive Fe(II) species originating from the reduction of structural Fe(III) in clays may contribute significantly to the biogeochemical cycling of electrons in the subsurface since it is not subject to depletion by reductive dissolution