Magnetic reversal processes and critical thickness in FePt/{\alpha}-Fe/FePt trilayers

Magnetic reversal processes of a FePt/{\alpha}-Fe/FePt trilayer system with in-plane easy axes have been investigated within a micromagnetic approach. It is found that the magnetic reversal process consists of three steps: nucleation of a prototype of domain wall in the soft phase, the evolution as well as the motion of the domain wall from the soft to the hard phase and finally, the magnetic reversal of the hard phase. For small soft layer thickness Ls, the three steps are reduced to one single step, where the magnetizations in the two phases reverse simultaneously and the hysteresis loops are square with nucleation as the coercivity mechanism. As Ls increases, both nucleation and pinning fields decrease. In the meantime, the single-step reversal expands to a standard three-step one and the coercivity mechanism changes from nucleation to pinning. The critical thickness where the coercivity mechanism alters, could be derived analytically, which is found to be inversely proportional to the square root of the crystalline anisotropy of the hard phase. Further increase of Ls leads to the change of the coercivity mechanism from pinning to nucleation.Comment: 21 pages, 5 figures, pdf file, figures include

An MPEG-7 scheme for semantic content modelling and filtering of digital video

Abstract Part 5 of the MPEG-7 standard specifies Multimedia Description Schemes (MDS); that is, the format multimedia content models should conform to in order to ensure interoperability across multiple platforms and applications. However, the standard does not specify how the content or the associated model may be filtered. This paper proposes an MPEG-7 scheme which can be deployed for digital video content modelling and filtering. The proposed scheme, COSMOS-7, produces rich and multi-faceted semantic content models and supports a content-based filtering approach that only analyses content relating directly to the preferred content requirements of the user. We present details of the scheme, front-end systems used for content modelling and filtering and experiences with a number of users

A plasticity model for powder compaction processes incorporating particle deformation and rearrangement

This article is available open access through the publisher’s website at the link below. Copyright @ 2008 Elsevier Ltd.This paper develops a mechanistic model of granular materials that can be used with a commercial finite element package (ABAQUS). The model draws on the ideas of critical state soil mechanics and combines them with the theory of envelopes to develop an elasto-plastic model with a non-associated flow rule. The model incorporates both local deformation at the granule contacts, and rearrangement of the granules so that jointly they account for any bulk deformation. The mechanics of the model closely reflect the physicality of the material behaviour and the model parameters are closely linked (although not simplistically identical) to the characteristics of the granules. This not only gives an insight into the material behaviour, but also enables the model to be used to facilitate design of the material, its processing properties and, hence, component development. The model is used to simulate drained triaxial tests, settlement of a powder in a bin, and some examples of die pressing. Simulations are compared with experimental data and with predictions obtained using other models

An Experimental Study of the Dynamic Split Tension Properties of Reinforced Concrete

Dynamic split tensile tests of reinforced concrete were carried out using the split Hopkinson pressure bar experimental technique to determine the failure modes of reinforced concrete at different strain rates, and the effect of reinforcement ratio and reinforcement layouts on the dynamic performance. The specimens with nine reinforcement ratios were used in the tests. Experimental results show that the tensile strength of reinforced concrete exhibits a critical strain rate, beyond which larger increases in dynamic strength of specimens occur. The dynamic split tension strength of reinforced concrete is demonstrated to be greater than the plain concrete with the same strength grade over the range of tested strain rate. The results also indicate that the dynamic split tension strength of specimens enhances with the increase of reinforcement ratio. These findings are instrumental to guide the structural design of reinforced concrete in engineering constructions

A batch-service queueing model with a discrete batch Markovian arrival process

Queueing systems with batch service have been investigated extensively during the past decades. However, nearly all the studied models share the common feature that an uncorrelated arrival process is considered, which is unrealistic in several real-life situations. In this paper, we study a discrete-time queueing model, with a server that only initiates service when the amount of customers in system (system content) reaches or exceeds a threshold. Correlation is taken into account by assuming a discrete batch Markovian arrival process (D-BMAP), i.e. the distribution of the number of customer arrivals per slot depends on a background state which is determined by a first-order Markov chain. We deduce the probability generating function of the system content at random slot marks and we examine the influence of correlation in the arrival process on the behavior of the system. We show that correlation merely has a small impact on the threshold that minimizes the mean system content. In addition, we demonstrate that correlation might have a significant influence on the system content and therefore has to be included in the model

Spatio-temporal dynamics of quantum-well excitons

We investigate the lateral transport of excitons in ZnSe quantum wells by using time-resolved micro-photoluminescence enhanced by the introduction of a solid immersion lens. The spatial and temporal resolutions are 200 nm and 5 ps, respectively. Strong deviation from classical diffusion is observed up to 400 ps. This feature is attributed to the hot-exciton effects, consistent with previous experiments under cw excitation. The coupled transport-relaxation process of hot excitons is modelled by Monte Carlo simulation. We prove that two basic assumptions typically accepted in photoluminescence investigations on excitonic transport, namely (i) the classical diffusion model as well as (ii) the equivalence between the temporal and spatial evolution of the exciton population and of the measured photoluminescence, are not valid for low-temperature experiments.Comment: 8 pages, 6 figure