Interlaminar crack growth in fiber reinforced composites during fatigue, part 3

Interlaminar crack growth behavior in fiber-reinforced composites subjected to fatigue loading was investigated experimentally and theoretically. In the experimental phase, inter-laminar crack propagation rates and mechanisms were determined for the cases of various geometries, laminate parameters and cyclic stress levels. A singular hybrid-stress finite element method was used in conjuction with the experimental results to examine the local crack-tip behavior and to characterize the crack propagation during fatigue. Results elucidate the basic nature of the cyclic delamination damage, and relate the interlaminar crack growth rate to the range of mixed-mode crack-tip stress intensity factors. The results show that crack growth rates are directly related to the range of the mixed-mode cyclic stress intensity factors by a power law relationship

DISCHARGE OXIDE STORAGE CAPACITY AND VOLTAGE LOSS IN LI-AIR BATTERY

Air cathodes, where oxygen reacts with Li ions and electrons with discharge oxide stored in their pore structure, are often considered as the most challenging component in nonaqueous Lithium-air batteries. In non-aqueous electrolytes, discharge oxides are usually insoluble and hence precipitate at local reaction site, raising the oxygen transport resistance in the pore network. Due to their low electric conductivity, their presence causes electrode passivation. This study aims to investigate the air cathode's performance through analytically obtaining oxygen profiles, modeling electrode passivation, evaluating the transport polarization raised by discharge oxide precipitate, and developing analytical formulas for insoluble Li oxides storage capacity. The variations of cathode quantities, including oxygen content and temperature, are evaluated and related to a single dimensionless parameter - the Damköhler Number (Da). An approximate model is developed to predict discharge voltage loss, along with validation against two sets of experimental data. Air cathode properties, including tortuosity, surface coverage factor and the Da number, and their effects on the cathode's capacity of storing Li oxides are formulated and discussed

Large amplitude drop shape oscillations

An experimental study of large amplitude drop shape oscillation was conducted in immiscible liquids systems and with levitated free liquid drops in air. In liquid-liquid systems the results indicate the existence of familiar characteristics of nonlinear phenomena. The resonance frequency of the fundamental quadrupole mode of stationary, low viscosity Silicone oil drops acoustically levitated in water falls to noticeably low values as the amplitude of oscillation is increased. A typical, experimentally determined relative frequency decrease of a 0.5 cubic centimeters drop would be about 10% when the maximum deformed shape is characterized by a major to minor axial ratio of 1.9. On the other hand, no change in the fundamental mode frequency could be detected for 1 mm drops levitated in air. The experimental data for the decay constant of the quadrupole mode of drops immersed in a liquid host indicate a slight increase for larger oscillation amplitudes. A qualitative investigation of the internal fluid flows for such drops revealed the existence of steady internal circulation within drops oscillating in the fundamental and higher modes. The flow field configuration in the outer host liquid is also significantly altered when the drop oscillation amplitude becomes large

Unsupervised learning of generative topic saliency for person re-identification

(c) 2014. The copyright of this document resides with its authors. It may be distributed unchanged freely in print or electronic forms.© 2014. The copyright of this document resides with its authors. Existing approaches to person re-identification (re-id) are dominated by supervised learning based methods which focus on learning optimal similarity distance metrics. However, supervised learning based models require a large number of manually labelled pairs of person images across every pair of camera views. This thus limits their ability to scale to large camera networks. To overcome this problem, this paper proposes a novel unsupervised re-id modelling approach by exploring generative probabilistic topic modelling. Given abundant unlabelled data, our topic model learns to simultaneously both (1) discover localised person foreground appearance saliency (salient image patches) that are more informative for re-id matching, and (2) remove busy background clutters surrounding a person. Extensive experiments are carried out to demonstrate that the proposed model outperforms existing unsupervised learning re-id methods with significantly simplified model complexity. In the meantime, it still retains comparable re-id accuracy when compared to the state-of-the-art supervised re-id methods but without any need for pair-wise labelled training data

Quantum gravitational decoherence of light and matter

T.O. is most grateful for a Carnegie Scholarship. C.W. acknowledges support from the EPSRC GG-Top Project.Peer reviewedPublisher PD

Statistical study of free magnetic energy and flare productivity of solar active regions

Photospheric vector magnetograms from Helioseismic and Magnetic Imager on board the Solar Dynamic Observatory are utilized as the boundary conditions to extrapolate both non-linear force-free and potential magnetic fields in solar corona. Based on the extrapolations, we are able to determine the free magnetic energy (FME) stored in active regions (ARs). Over 3000 vector magnetograms in 61 ARs were analyzed. We compare FME with ARs' flare index (FI) and find that there is a weak correlation ($<60\%$) between FME and FI. FME shows slightly improved flare predictability relative to total unsigned magnetic flux of ARs in the following two aspects: (1) the flare productivity predicted by FME is higher than that predicted by magnetic flux and (2) the correlation between FI and FME is higher than that between FI and magnetic flux. However, this improvement is not significant enough to make a substantial difference in time-accumulated FI, rather than individual flare, predictions.Comment: The paper was submitted to ApJ and it is accepted no

Analytical Results For The Steady State Of Traffic Flow Models With Stochastic Delay

Exact mean field equations are derived analytically to give the fundamental diagrams, i.e., the average speed - car density relations, for the Fukui-Ishibashi one-dimensional traffic flow cellular automaton model of high speed vehicles $(v_{max}=M>1)$ with stochastic delay. Starting with the basic equation describing the time evolution of the number of empty sites in front of each car, the concepts of inter-car spacings longer and shorter than $M$ are introduced. The probabilities of having long and short spacings on the road are calculated. For high car densities $(\rho \geq 1/M)$, it is shown that inter-car spacings longer than $M$ will be shortened as the traffic flow evolves in time, and any initial configurations approach a steady state in which all the inter-car spacings are of the short type. Similarly for low car densities $(\rho \leq 1/M)$, it can be shown that traffic flow approaches an asymptotic steady state in which all the inter-car spacings are longer than $M-2$. The average traffic speed is then obtained analytically as a function of car density in the asymptotic steady state. The fundamental diagram so obtained is in excellent agreement with simulation data.Comment: 12 pages, latex, 2 figure

System for monitoring physical characteristics of fluids

An apparatus and method are described for measuring physical characteristics of fluid, by placing a drop of the fluid in a batch of a second fluid and passing acoustic waves through the bath. The applied frequency of the acoustic waves is varied, to determine the precise value of a frequency at which the drop undergoes resonant oscillations. The resonant frequency indicates the interfacial tension of the drop in the bath, and the interfacial tension can indicate physical properties of the fluid in the drop