116 research outputs found
A practical method for optimum seismic design of friction wall dampers
Friction control systems have been widely used as one of the efficient and cost
effective solutions to control structural damage during strong earthquakes.
However, the height-wise distribution of slip loads can significantly affect the
seismic performance of the strengthened frames. In this study, a practical design
methodology is developed for more efficient design of friction wall dampers by
performing extensive nonlinear dynamic analyses on 3, 5, 10, 15, and 20-story RC
frames subjected to seven spectrum-compatible design earthquakes and five
different slip load distribution patterns. The results show that a uniform
cumulative distribution can provide considerably higher energy dissipation
capacity than the commonly used uniform slip load pattern. It is also proved that
for a set of design earthquakes, there is an optimum range for slip loads that is a
function of number of stories. Based on the results of this study, an empirical
equation is proposed to calculate a more efficient slip load distribution of friction
wall dampers for practical applications. The efficiency of the proposed method is
demonstrated through several design examples
Discovery of a Novel hsp65 Genotype within Mycobacterium massiliense Associated with the Rough Colony Morphology
So far, genetic diversity among strains within Mycobacterium massiliense has rarely been studied. To investigate the genetic diversity among M. massiliense, we conducted phylogenetic analysis based on hsp65 (603-bp) and rpoB (711-bp) sequences from 65 M. massiliense Korean isolates. We found that hsp65 sequence analysis could clearly differentiate them into two distinct genotypes, Type I and Type II, which were isolated from 35 (53.8%) and 30 patients (46.2%), respectively. The rpoB sequence analysis revealed a total of four genotypes (R-I to R-IV) within M. massiliense strains, three of which (R-I, R-II and R-III) correlated with hsp65 Type I, and other (R-IV), which correlated with Type II. Interestingly, genotyping by the hsp65 method agreed well with colony morphology. Despite some exceptions, Type I and II correlated with smooth and rough colonies, respectively. Also, both types were completely different from one another in terms of MALDI-TOF mass spectrometry profiles of whole lipid. In addition, we developed PCR-restriction analysis (PRA) based on the Hinf I digestion of 644-bp hsp65 PCR amplicons, which enables the two genotypes within M. massiliense to be easily and reliably separated. In conclusion, two distinct hsp65 genotypes exist within M. massiliense strains, which differ from one another in terms of both morphology and lipid profile. Furthermore, our data indicates that Type II is a novel M. massiliense genotype being herein presented for the first time. The disparity in clinical traits between these two hsp65 genotypes needs to be exploited in the future study
Combining blue native polyacrylamide gel electrophoresis with liquid chromatography tandem mass spectrometry as an effective strategy for analyzing potential membrane protein complexes of Mycobacterium bovis bacillus Calmette-Guérin
<p>Abstract</p> <p>Background</p> <p>Tuberculosis is an infectious bacterial disease in humans caused primarily by <it>Mycobacterium tuberculosis</it>, and infects one-third of the world's total population. <it>Mycobacterium bovis </it>bacillus Calmette-Guérin (BCG) vaccine has been widely used to prevent tuberculosis worldwide since 1921. Membrane proteins play important roles in various cellular processes, and the protein-protein interactions involved in these processes may provide further information about molecular organization and cellular pathways. However, membrane proteins are notoriously under-represented by traditional two-dimensional polyacrylamide gel electrophoresis (2-D PAGE) and little is known about mycobacterial membrane and membrane-associated protein complexes. Here we investigated <it>M. bovis </it>BCG by an alternative proteomic strategy coupling blue native PAGE to liquid chromatography tandem mass spectrometry (LC-MS/MS) to characterize potential protein-protein interactions in membrane fractions.</p> <p>Results</p> <p>Using this approach, we analyzed native molecular composition of protein complexes in BCG membrane fractions. As a result, 40 proteins (including 12 integral membrane proteins), which were organized in 9 different gel bands, were unambiguous identified. The proteins identified have been experimentally confirmed using 2-D SDS PAGE. We identified MmpL8 and four neighboring proteins that were involved in lipid transport complexes, and all subunits of ATP synthase complex in their monomeric states. Two phenolpthiocerol synthases and three arabinosyltransferases belonging to individual operons were obtained in different gel bands. Furthermore, two giant multifunctional enzymes, Pks7 and Pks8, and four mycobacterial Hsp family members were determined. Additionally, seven ribosomal proteins involved in polyribosome complex and two subunits of the succinate dehydrogenase complex were also found. Notablely, some proteins with high hydrophobicity or multiple transmembrane helixes were identified well in our work.</p> <p>Conclusions</p> <p>In this study, we utilized LC-MS/MS in combination with blue native PAGE to characterize modular components of multiprotein complexes in BCG membrane fractions. The results demonstrated that the proteomic strategy was a reliable and reproducible tool for analysis of BCG multiprotein complexes. The identification in our study may provide some evidence for further study of BCG protein interaction.</p
Metal-Substituted Microporous Aluminophosphates
This chapter aims to present the zeotypes aluminophosphates (AlPOs) as a complementary alternative to zeolites in the isomorphic incorporation of metal ions within all-inorganic microporous frameworks as well as to discuss didactically the catalytic consequences derived from the distinctive features of both frameworks. It does not intend to be a compilation of either all or the most significant publications involving metal-substituted microporous aluminophosphates. Families of AlPOs and zeolites, which include metal ion-substituted variants, are the dominant microporous materials. Both these systems are widely used as catalysts, in particular through aliovalent metal ions substitution. Here, some general description of the synthesis procedures and characterization techniques of the MeAPOs (metal-contained aluminophosphates) is given along with catalytic properties. Next, some illustrative examples of the catalytic possibilities of MeAPOs as catalysts in the transformation of the organic molecules are given. The oxidation of the hardly activated hydrocarbons has probably been the most successful use of AlPOs doped with the divalent transition metal ions Co2+, Mn2+, and Fe2+, whose incorporation in zeolites is disfavoured. The catalytic role of these MeAPOs is rationalized based on the knowledge acquired from a combination of the most advanced characterization techniques. Finally, the importance of the high specificity of the structure-directing agents employed in the preparation of MeAPOs is discussed taking N,N-methyldicyclohexylamine in the synthesis of AFI-structured materials as a driving force. It is shown how such a high specificity could be predicted and how it can open great possibilities in the control of parameters as critical in catalysis as crystal size, inter-and intracrystalline mesoporosity, acidity, redox properties, incorporation of a great variety of heteroatom ions or final environment of the metal site (surrounding it by either P or Al)
Facile Preparation of Aluminosilicate RTH across a Wide Composition Range Using a New Organic Structure-Directing Agent
Smart passive damper control for greater building earthquake resilience in sustainable cities
Passive dampers are used recently in many mid and high-rise buildings. This trend is accelerated by the increased demand and desire for safer, more reliable and more comfortable buildings under uncertain external loading and environment. Viscous, visco-elastic, hysteretic and friction dampers are representatives of passive dampers. Such passive dampers also play a key role in the implementation of structural rehabilitation which is essential for the realization and promotion of sustainable buildings. The technique of structural health monitoring is inevitable for the reliable and effective installation of passive dampers during the structural rehabilitation or retrofit. The design earthquake ground motions change from time to time when a new class of ground motions (e.g. long-period ground motions due to surface waves) is observed or a new type of damage appears during severe earthquakes. The concept of critical excitation is useful in responding to this change together with the usage of passive dampers from the viewpoint of sustainable buildings and cities. In this paper, a historical review is made on the development of smart or optimal building structural control with passive dampers and some possibilities of structural rehabilitation by use of passive dampers are discussed
- …