Initial stage of the 2D-3D transition of a strained SiGe layer on a pit-patterned Si(001) template

We investigate the initial stage of the 2D-3D transition of strained Ge layers deposited on pit-patterned Si(001) templates. Within the pits, which assume the shape of inverted, truncated pyramids after optimized growth of a Si buffer layer, the Ge wetting layer develops a complex morphology consisting exclusively of {105} and (001) facets. These results are attributed to a strain-driven step-meandering instability on the facetted side-walls of the pits, and a step-bunching instability at the sharp concave intersections of these facets. Although both instabilities are strain-driven, their coexistence becomes mainly possible by the geometrical restrictions in the pits. It is shown that the morphological transformation of the pit surface into low-energy facets has strong influence on the preferential nucleation of Ge islands at the flat bottom of the pits.Comment: 19 pages, 7 figure

Magnetic prospection in the Eastern lower city of Artashat-Artaxata in the Ararat Plain of Armenia

In March of 2021, the Berlin-based company cmp continued geophysical prospection works at the ancient city of Artashat-Artaxata (Ararat Province, Armenia). The city was founded by Artashes-Artaxias I in the early 2nd century BC and served as his capital. First magnetic measurements were conducted by the Eastern Atlas company in September 2018. In 2021, during the 5-day survey a total surface of approximately 19.5 ha was investigated by use of the LEA MAX magnetic gradiometer array. This system was configured with seven fluxgate gradiometer probes, similar to the system used in the first survey of 2018. The investigated areas of the Eastern Lower City of Artaxata, located to the south of the investigated field of 2018, had good surface conditions with a moderate amount of sources causing disturbance. However, the general level of the magnetic gradient values measured was significantly lower compared to the 2018 data. Despite the lower magnetic field intensity, a continuation of linear structures towards the south was observed. These lines, most likely reflecting streets and pathways, criss-cross the central part of the Eastern Lower City in a NW–SE and NE–SW direction and exhibit partly positive, partly negative magnetic anomalies. Attached to them, some isolated spots with building remains were identified. The negative linear anomalies point to remains of limestone foundations, as detected in the northern part of the Lower City. The low magnetic intensity and fragmentation of the observed structures are most likely due to severe destruction of the ancient layers by 20th-century earthworks for agricultural purposes. Moreover, the southern part of the surveyed area was affected by major changes caused by modern quarries at Hills XI and XII. In general, the results of the two magnetic prospection campaigns greatly aid our understanding of the archaeological situation in the area of the Eastern Lower City of Artaxata, justifying further investigations that will surely contribute to greater contextualization of the identified archaeological structures. The full data sets are also published in open access on Zenodo

Exotic glass types and the intensity of recycling in the northwest Quarter of Gerasa (Jerash, Jordan)

Major and trace elements are presented for 149 glass fragments ranging in date from the Roman to Early Islamic periods (1st – mid-8th centuries CE), excavated during the Danish-German Jerash Northwest Quarter Project's fieldwork between 2011 and 2016. The results confirm a clear dominance of Levantine glass types, but also reveal 12 glasses of Egyptian and Mesopotamian compositions recovered from two houses destroyed by the major earthquake which hit parts of the Levant in January 749 CE. These closed and undisturbed contexts from the final phase of occupation reveal the presence of relatively more pristine Levantine as well as imported material that is less visible in earlier contexts in the Gerasa assemblage, where the recycling indexes are high and chemical signatures of any exotic glass were largely lost due to remelting and their dilution by the overwhelming quantities of glass produced in the Levantine region. This emphasizes that imported glass may frequently be underestimated or even invisible in glass compositional studies, depending on the archaeological context sampled and the approach taken to artifact quantification. Levantine glass was attributed to Roman, Late Roman (Jalame) and Byzantine/Early Islamic (Apollonia) productions based primarily on MnO, Al_{2}O_{3} and Na_{2}O concentrations, which offered an advantage over previous approaches. While colorants in weakly colored glass indicate recycled material, their concentrations are sensitive to context, with higher concentrations in the early periods when the use of intentionally colored glass was more frequent. We have therefore developed the concept of the intensity of recycling, which was estimated using components modified during prolonged melting, such as K_{2}O, P_{2}O_{5} and Cl. A pronounced enrichment in CaO, also dependent upon the intensity of recycling, may affect the assignment to compositional groups and should be taken into consideration in future. Recycling in Gerasa appears to have been more intensive than was the case for cities closer to the primary production centers on the Mediterranean coast, consistent with the view that the dependency on recycling increases further away from the source of the primary material. In contrast, the cities in the coastal plain could readily exploit the marine transportation network, which appears to have played a major role in the distribution of raw glass

Copper-based metalwork in Roman to early Islamic Jerash (Jordan): Insights into production and recycling through alloy compositions and lead isotopes

Metallographic, chemical and lead isotopic analyses of copper-based artefacts recovered from the Northwest Quarter in Jerash (ancient Gerasa) in Jordan provide new information on the civic life and material culture from a key urban site in the Roman Empire's eastern provinces. The samples span the city's occupation from its flourishing under Roman rule into the Byzantine and early Islamic periods. We examined 49 copper-based artefacts using reflected light microscopy and micro-X-ray fluorescence. A subset of these artefacts was analysed by electron microprobe spectroscopy for major and minor elements at higher spatial resolution, and by multi-collector inductively coupled plasma mass spectrometry for lead isotopes. Results imply that binary bronze dominated the Roman period, (leaded) brass characterised the Byzantine period, while tin-containing alloys were prevalent during the Islamic period. Lead isotopes suggest that during the Roman and Byzantine periods some of the metal in Jerash came from European and/or Mediterranean sources, while copper used during the Islamic period may have been sourced more locally from Timna. The changes in alloy types and lead isotopes suggest that recycling of metals took place in Jerash possibly as early as the Roman period and more frequent from the Byzantine period onwards

The unitary ability of IQ and indexes in WAIS-IV

Lichtenberger and Kaufman (2009, p. 167) defined unitary ability as ‘an ability […] that is represented by a cohesive set of scaled scores, each reflecting slightly different or unique aspects of the ability’. Flanagan and Kaufman (2009) and Lichtenberger and Kaufman (2012) used a difference of 23 IQ points between the highest score (Max) and the lowest score (Min) obtained by a subject in the four Indexes of the WAIS-IV to define unitarity of the total IQ score. A similar method has been used to assess the unitary ability of the four Indexes, with a threshold of 5 points. Such difference scores (of 23 for IQ and 5 for Indexes) are considered high and infrequent and the authors therefore conclude that the corresponding Full-Scale IQ score or Index score is uninterpretable. In this paper we argue that these thresholds are inappropriate because they are based on the wrong standard deviation. The main aim of this study was to establish variability thresholds for IQ and the WAIS-IV Indexes for the American standardization sample and to compare these thresholds with those for the Italian standardization sample. We also consider an alternative approach to determining whether an IQ score represents a unitary ability, based on the maximum difference score for the 10 core subtests that contribute to Full-Scale IQ scores

Transient-Enhanced Surface Diffusion on Natural-Oxide-Covered Si(001) Templates during Vacuum Annealing

We report on the transient-enhanced shape transformation of nano-structured Si(001) surfaces upon in vacuo annealing at relatively low temperatures of 900 -950 °C for a few minutes. We find dramatic surface mass transport concomitant with the development of low-energy facets on surfaces that are covered by native oxide. The enhanced surface mass transport ceases after the oxide is completely desorbed, and it is not observed on surfaces where the native oxide had been removed by HF before annealing

Razvoj i fizikokemijsko vrednovanje farmakosoma diklofenaka

Pharmacosomes are amphiphilic lipid vesicular systems that have shown their potential in improving the bioavailability of poorly water soluble as well as poorly lipophilic drugs. Diclofenac is a poorly water soluble drug and also causes gastrointestinal toxicity. To improve the water solublity of diclofenac, its pharmacosomes (phospholipid complex) have been prepared and evaluated for physicochemical analysis. Diclofenac was complexed with phosphatidylcholine (80 %) in equimolar ratio, in the presence of dichloromethane, by the conventional solvent evaporation technique. Pharmacosomes thus prepared were evaluated for drug solubility, drug content, surface morphology (by scanning electron microscopy), phase transition behaviour (by differential scanning calorimetry), crystallinity (by X-ray powder diffraction) and in vitro dissolution. Pharmacosomes of diclofenac were found to be irregular or disc shaped with rough surfaces in SEM. Drug content was found to be 96.2 1.1 %. DSC thermograms and XRPD data confirmed the formation of the phospholipid complex. Water solubility of the prepared complex was found to be 22.1 µg mL1 as compared to 10.5 µg mL1 of diclofenac. This improvement in water solubility in prepared pharmacosomes may result in improved dissolution and lower gastrointestinal toxicity. Pharmacosomes showed 87.8 % while the free diclofenac acid showed a total of only 60.4 % drug release at the end of 10 h of the dissolution study.Farmakosomi su amfifilni lipidni vezikularni sustavi sa sposobnošću poboljšanja bioraspoloživosti lijekova slabo topljivih u vodi i organskim otapalima. U svrhu povećanja topljivosti diklofenaka (ljekovite tvari koja je slabo vodotopljiva, a uzrokuje i gastrointestinalnu toksičnost) pripravljeni su i evaluirani njegovi farmakosomi (fosfolipidni kompleksi). Diklofenak je kompleksiran s fosfatidilkolinom (80 %) u ekvimolarnom omjeru, u prisutnosti diklormetana, konvencionalnom metodom evaporacije. Tako pripravljenim farmakosomima ispitivana je topljivost, sadržaj ljekovite tvari, morfologija površine (pomoću pretražne elektronske mikroskopije), ponašanje pri prijelazu faza (pomoću diferencijalne pretražne kalorimetrije), kristaliničnost (rendgenskom analizom praha) i in vitro oslobađanje. Farmakosomi diklofenaka su nepravilnog oblika ili u obliku diska te imaju neravnu površinu u SEM-u. Sadržaj ljekovite tvari je 96,2 1,1 %. DSC termogrami i XRPD podaci potvrdili su nastajanje fosfolipidnog kompleksa. Topljivost u vodi dobivenih kompleksa bila je 22,1 µg mL1, a topljivost samog diklofenaka 10,5 µg mL1. Postignuto poboljšanje topljivosti može imati za posljedicu povećano oslobađanje i manju gastrointestinalnu toksičnost. Tijekom 10 h iz farmakosoma se oslobodilo 87,8 %, a iz slobodnog diklofenaka samo 60,4 % ljekovite tvari

Photoelectric Emission from Interstellar Dust: Grain Charging and Gas Heating

We model the photoelectric emission from and charging of interstellar dust and obtain photoelectric gas heating efficiencies as a function of grain size and the relevant ambient conditions. Using realistic grain size distributions, we evaluate the net gas heating rate for various interstellar environments, and find less heating for dense regions characterized by R_V=5.5 than for diffuse regions with R_V=3.1. We provide fitting functions which reproduce our numerical results for photoelectric heating and recombination cooling for a wide range of interstellar conditions. In a separate paper we will examine the implications of these results for the thermal structure of the interstellar medium. Finally, we investigate the potential importance of photoelectric heating in H II regions, including the warm ionized medium. We find that photoelectric heating could be comparable to or exceed heating due to photoionization of H for high ratios of the radiation intensity to the gas density. We also find that photoelectric heating by dust can account for the observed variation of temperature with distance from the galactic midplane in the warm ionized medium.Comment: 50 pages, including 18 figures; corrected title and abstract field