326 research outputs found

    Feedback Enhances Simultaneous Wireless Information and Energy Transmission in Multiple Access Channels

    Get PDF
    In this report, the fundamental limits of simultaneous information and energy transmission in the two-user Gaussian multiple access channel (G-MAC) with and without feedback are fully characterized. More specifically, all the achievable information and energy transmission rates (in bits per channel use and energy-units per channel use, respectively) are identified. Furthermore, the fundamental limits on the individual and sum- rates given a minimum energy rate ensured at an energy harvester are also characterized. In the case without feedback, an achievability scheme based on power-splitting and successive interference cancellation is shown to be optimal. Alternatively, in the case with feedback (G-MAC-F), a simple yet optimal achievability scheme based on power-splitting and Ozarow's capacity achieving scheme is presented. Finally, the energy transmission enhancement induced by the use of feedback is quantified. Feedback can at most double the energy transmission rate at high SNRs when the information transmission sum-rate is kept fixed at the sum-capacity of the G-MAC, but it has no effect at very low SNRs.Comment: INRIA REPORT N{\deg}8804, accepted for publication in IEEE transactions on Information Theory, March, 201

    Optimized Domain Decomposition Method for Non Linear Reaction Advection Diffusion Equation

    Get PDF
    This work is devoted to an optimized domain decomposition method applied to a non linear reaction advection diffusion equation. The proposed method is based on the idea of the optimized of two order (OO2) method developed this last two decades. We first treat a modified fixed point technique to linearize the problem and then we generalize the OO2 method and modify it to obtain a new more optimized rate of convergence of the Schwarz algorithm. To compute the new rate of convergence we have used Fourier analysis. For the numerical computation we minimize this rate of convergence using a global optimization algorithm. Several test-cases of analytical problems illustrate this approach and show the efficiency of the proposed new method

    Biochemical characterization of a cefotaximehydrolysing &#946-lactamase encoded by a conjugative plasmid

    Get PDF
    During the nosocomials infections occurring in the intensive care unit of the military hospital of Tunis in 2005, the Enterobacter cloacae BW 1150 strain was isolated from a stool culture. This strain was found to have a high level resistance to broad-spectrum -lactams. Resistance profile against thevarious families of antibiotics was determined using the disc diffusion test. The minimal inhibitory concentrations values showed that this strain was resistant to the -lactams such as ampicillin and the extended spectrum cephalosporins (cefotaxime, ceftriaxon and cefpirome). Analysis of this strain by the disk diffusion test revealed synergies between amoxicillin-clavulanate (AMX-CA) and ceftriaxon, ceftazidime and cefotaxime. Cell sonicate of this isolate is very active against cefotaxime and showed aspecific activity (AS) of 7.54 U/mg for the same antibiotic. This activity was inhibited by the sulbactam and the clavulanic acid. Isoelectrofocusing methods revealed that the crude extract of the E. cloacae BW 1150 strain showed 1 - lactamase activity with an isoelectric piont (pI) of about 8. This activity was transferred by conjugation and was highly expressed in the transconjugant

    Toksikološke metode otkrivanja opojnih droga u tragovima: kromatografska, spektroskopska i biološka karakterizacija derivata ecstasyja

    Get PDF
    Analysis often reveals variability in the composition of ecstasy pills from pure 3,4-methylenedioxymethamphetamine (MDMA) to mixtures of MDMA derivatives, amphetamine, and other unidentifi ed substances. For a comprehensive toxicological analysis one needs to know all steps to MDMA synthesis which may originate impurities. The aim of this study was to synthesise and determine the chemical-physical and in vitro biological properties of a series of MDMA derivatives. 3,4-methylendioxyphenyl-2-nitropropene (MDNP) was obtained by condensation of piperonal with an excess of nitroethane in the presence of ammonium acetate. MDNP was then reduced to methylenedioxyamphetamine (MDA) by LiAlH3. All compounds were analysed using HPLC and spectroscopic technique [Raman, nuclear magnetic resonance (NMR), or infrared (IR)] at all the steps of synthesis. In addition, we assessed the biological potentials of these compounds by measuring in vitro their (i) blood cell/whole blood partition coeffi cient, (ii) binding to plasmatic proteins (Fbp), and (iii) membrane adsorption. Chemical structure was determined with antibody fl uorescence polarisation immunoassay (FPIA). This study showed the presence of solid impurities, particularly of a neurotoxic compound of Al3+ in the fi nal products. FPIA identifi ed the aminoethane group close to the substituted benzene ring, but did not detect the two major precursors of MDMA: MDNP and piperonal. Raman spectroscopy is an attractive alternative technique to characterise ecstasy pills and it can identify stereoisomeric forms such as cis-MDNP and trans-MDNP, which exhibit signals at 1650 cm-1 and 1300 cm-1, respectively.Analize često otkriju neujednačenost sastava tableta ecstasyja od čistoga 3,4-metilendioksimetamfetamina (MDMA) do mješavina njegovih derivata, amfetamina i drugih neutvrđenih tvari. Stoga je za kvalitetnu toksikološku analizu potreban uvid u sve korake sinteze MDMA, s obzirom na to da se ondje vjerojatno kriju izvori nečistoće (prekursori, katalizatori). Cilj ovog ispitivanja bio je sintetizirati derivate MDMA te napraviti njihovu kemijsko-fi zikalnu i biološku in vitro karakterizaciju. 3,4-metilendioksifenil-2-nitropropen (MDNP) dobiven je kondenzacijom piperonala u suvišku nitroetana uz dodatak amonijeva acetata. Njegovom redukcijom s pomoću LiAlH3 dobiven je 3,4-metilendioksiamfetamin (MDA). Svi spojevi iz pojedinih koraka sinteze karakterizirani su s pomoću tekućinske kromatografi je visoke djelotvornosti (HPLC) i spektroskopskih tehnika [Ramanove spektroskopije, nuklearne magnetske rezonancije (NMR-a) te infracrvene spektroskopije (IR-a)]. Usto je ocijenjen i njihov biološki učinak in vitro mjerenjem (i) koefi cijenta raspodjele krvna stanica/puna krv, (ii) vezanja za bjelančevine u plazmi (Fbp) te (iii) adsorpcije na membranu. Kemijska je struktura utvrđena s pomoću fl uorescentnoga polarizacijskog imunokemijskog testa (FPIA). Analiza je u konačnim proizvodima utvrdila prisutnost krutih nečistoća, napose spojeva neurotoksičnog aluminija (Al3+). FPIA je prepoznao aminoetansku skupinu blizu supstituiranoga benzenskog prstena, ali ne i dva glavna prekursora za MDMA: MDNP i piperonal. Posebno je zanimljiva Ramanova spektroskopija budući da (i) pruža privlačnu alternativu za karakterizaciju sastava tableta ecstasyja te (ii) može otkriti stereoizomerne cis/trans-oblike spoja poput cis-MDNP-a odnosno trans-MDNP-a, čiji se signal vidi na 1650 cm-1 odnosno 1300 cm-1

    Influence of temperature and applied potential on the permeability of polyphenol films prepared on vitreous carbon in acid and alkaline media

    Get PDF
    The electrochemical polymerization of phenol is known to rapidly produce a thin insulating film at the anode surface. This film generally blocks further polymerization. The objective of this study is to show that, depending on the operating conditions, polymeric films resulting from phenol oxidation present different properties and that certain films can be so porous that they allow the oxidation of phenol to continue. The deposition of polyphenol films with improved permeability could be attractive in the removal of phenol from polluted solutions. Polyphenol films were prepared in aqueous solution on a vitreous carbon anode either by cyclic voltammetry or by electro-oxidation at constant potential. The apparent permeability P (%) of the films prepared by these techniques was evaluated by monitoring changes in the electrode response towards phenol and potassium ferricyanide at 25 and 85°C and as a function of the potential applied during electropolymerization performed either in acidic (1 mol L-¹H₂SO₄) or in alkaline (1 mol L-¹ NaOH) aqueous solution. It was shown that: (1) the polyphenol film electrosynthesized in alkaline medium was more permeable than that prepared in acidic medium, (2) the apparent permeability was higher when the polyphenol film was electrosynthesized with simultaneous oxygen evolution and (3) the use of a high temperature in the polyphenol film preparation, especially in the presence of a concomitant oxygen evolution, significantly enhanced its apparent permeability (P ≥ 100 %). These results are interpreted in terms of a mixed-transport mechanism involving both pore and membrane diffusion. The effect of the permeability of the polymeric film on the removal of phenol from aqueous solution by electropolymerization is discussed

    Influence of temperature and applied potential on the permeability of polyphenol films prepared on vitreous carbon in acid and alkaline media

    Get PDF
    The electrochemical polymerization of phenol is known to rapidly produce a thin insulating film at the anode surface. This film generally blocks further polymerization. The objective of this study is to show that, depending on the operating conditions, polymeric films resulting from phenol oxidation present different properties and that certain films can be so porous that they allow the oxidation of phenol to continue. The deposition of polyphenol films with improved permeability could be attractive in the removal of phenol from polluted solutions. Polyphenol films were prepared in aqueous solution on a vitreous carbon anode either by cyclic voltammetry or by electro-oxidation at constant potential. The apparent permeability P (%) of the films prepared by these techniques was evaluated by monitoring changes in the electrode response towards phenol and potassium ferricyanide at 25 and 85°C and as a function of the potential applied during electropolymerization performed either in acidic (1 mol L-¹H₂SO₄) or in alkaline (1 mol L-¹ NaOH) aqueous solution. It was shown that: (1) the polyphenol film electrosynthesized in alkaline medium was more permeable than that prepared in acidic medium, (2) the apparent permeability was higher when the polyphenol film was electrosynthesized with simultaneous oxygen evolution and (3) the use of a high temperature in the polyphenol film preparation, especially in the presence of a concomitant oxygen evolution, significantly enhanced its apparent permeability (P ≥ 100 %). These results are interpreted in terms of a mixed-transport mechanism involving both pore and membrane diffusion. The effect of the permeability of the polymeric film on the removal of phenol from aqueous solution by electropolymerization is discussed

    Electrochemical polymerisation of phenol in aqueous solution on a Ta/PbO2 anode

    Get PDF
    This paper deals with the treatment of aqueous phenol solutions using an electrochemical technique. Phenol can be partly eliminated from aqueous solution by electrochemically initiated polymerisation. Galvanostatic electrolyses of phenol solutions at concentration up to 0.1 mol dm−3 were carried out on a Ta/PbO2 anode. The polymers formed are insoluble in acidic medium but soluble in alkaline. These polymers were filtered and then dissolved in aqueous solution of sodium hydroxide (1 mol dm−3). The polymers formed were quantified by total organic carbon (TOC) measurement. It was found that the conversion of phenol into polymers increases as a function of initial concentration, anodic current density, temperature, and solution pH. The percentage of phenol polymerised can reach 15%

    High-level cefotaxime-resistant Proteus mirabilis strain isolated from a Tunisian intensive care unit ward: CTX-M-8 extended-spectrum β-lactamase coproduced with a plasmid mediated AmpC lactamase

    Get PDF
    The aimed of this study was to determine the implication of the biochemical and the molecular mechanism and to describe the properties of an extended-spectrum β-lactamase (ESBL) CTX-M-8 which was reported for the first time in Africa. A clinical isolate of Proteus mirabilis FS6449 was isolated from a patient hospitalized at an intensive care unit of the Military Hospital in Tunisia in 2009. Antimicrobial susceptibility was determined with the disk diffusion method according to Clinical and Laboratory Standards Institute (CLSI) guidelines and revealed that this strain was resistant to expanded-spectrum β-lactams. Analysis of P. mirabilis FS6449 by double-disk synergy test yielded a positive result suggesting the production of ESBLs. Sonicate of the isolate hydrolysed cefotaxime and benzylpenicillin. Isoelectric focusing exhibited four β-lactamase bands of isoelectric points (pIs) 5.6, 6, 6.5 and over 7.6. Polymerase chain reaction (PCR) and sequencing experiments revealed the presence of four β-lactamase genes encoding TEM-2, CTX-M-8, TEM-24, and an AmpC enzyme. Among them, the genes encoding TEM-24 and an AmpC enzyme were transferred to the recipient by conjugation experiments.Keywords: Resistance, β-lactamase, Proteus mirabilisAfrican Journal of Biotechnology Vol. 12(21), pp. 3278-328
    corecore