59 research outputs found
Rotating filters permit wide range of optical pyrometry
Gear-driven dual filter disks of graduated density vary linearly with respect to rotation, allowing a wide range of photographic pyrometry. this technique is applicable in metallurgy, glass, plastics and refractory research, and crystallography
Micrometeoroid penetration measuring device Patent
Measuring micrometeroid depth of penetration into various material
Thermal performance of two heat exchangers for thermoelectric generators
Thermal performance of heat exchanger is important for potential application in integrated solar cell/module and
thermoelectric generator (TEG) system. Usually, thermal performance of a heat exchanger for TEGs is analysed
by using a 1D heat conduction theory which ignores the detailed phenomena associated with thermo-hydraulics.
In this paper, thermal and mass transports in two different exchangers are simulated by means of a steady-state,
3D turbulent flow k -e model with a heat conduction module under various flow rates. In order to simulate an
actual working situation of the heat exchangers, hot block with an electric heater is included in the model. TEG
model is simplified by using a 1D heat conduction theory, so its thermal performance is equivalent to a real TEG.
Natural convection effect on the outside surfaces of the computational model is considered. Computational
models and methods used are validated under transient thermal and electrical experimental conditions of a TEG.
It is turned out that the two heat exchangers designed have a better thermal performance compared with an
existing heat exchanger for TEGs, and more importantly, the fin heat exchanger is more compact and has nearly
half temperature rise compared with the tube heat exchanger
A three-point-based electrical model and its application in a photovoltaic thermal hybrid roof-top system with crossed compound parabolic concentrator
A new coupled optical, thermal and electrical model is presented in this study and applied to a 27 concentrating photovoltaic thermal (PV/T) system for predicting the system performance under 28 various operational conditions. Firstly, a three-point-based electrical model and a method for 29 extracting its five model parameters are developed by using the currents and voltages at the short-, 30 open-circuit and maximum power points provided in usual PV module/panel datasheets. Then, the 31 model and method are validated with the existing six flat-plate PV modules and subsequently are used 32 to predict the hourly electrical performance of the CPV/T roof-top system designed by us under 33 outdoor conditions on four clear days by integrating with a scaling law developed by us. Additionally, 34 transient effect and water temperature on the storage tank are examined. It turned out that the CPV 35 system could operate for 6 hours a day with a peak instant electrical power of 50W/m2 and could 36 generate 0.22kWh/m2 electricity a day in May-July. The error in hourly electrical energy gained 37 between the predictions and observations is in a range of (3.64-8.95)% with the mean of 5.53 % in 38 four days, and the estimated water temperature in the storage tank agrees with the monitored one in 39 range of 0.2-1oC. The proposed methods as well as the electrical models could potentially be applied 40 widely across the solar energy field for the management and operation of the electrical energy 41 production from any CPV/T roof-top system
Indoor characterization of a reflective type 3D LCPV system
This is the final version of the article. Available from AIP Publishing via the DOI in this record.Low concentrating photovoltaic (LCPV) systems produces higher electrical output per unit solar cell compared to typical PV systems. The high efficiency Si solar cells can be utilized with little design and manufacturing changes for these applications. However, a key barrier towards achieving economic viability and the widespread adoption of LCPV technologies is the losses related to high operating temperature. In the present study, we evaluate the performance 3D low concentration system designed for 3.6x, using a reflective Cross compound parabolic concentrator (CCPC) and a Laser Grooved Buried Contact solar cell having an area of 50∗50mm 2 . Results demonstrate the losses occurring due to the temperature rise of the solar cell under concentration and we analyze the potential which could be utilized for low grade heating applications.The authors gratefully acknowledge financial support received from the EPSRC through Solar Challenge project
SUNTRAP (EP/K022156/1). We would also like to thank the Super Solar Hub for providing us with the travel grant
for this conference
Multiphysics simulations of thermoelectric generator modules with cold and hot blocks and effects of some factors
This is the final version of the article. Available from Elsevier via the DOI in this record.Transient and steady-state multiphysics numerical simulations are performed to investigate the thermal and electrical performances of a thermoelectric generator (TEG) module placed between hot and cold blocks. Effects of heat radiation, leg length and Seebeck coefficient on the TEG thermal and electrical performances are identified. A new correlation for the Seebeck coefficient with temperature is proposed. Radiation effects on the thermal and electric performances are found to be negligible under both transient and steady-state conditions. The leg length of the TEG module shows a considerable influence on the electrical performance but little on the thermal performance under transient conditions. A nearly linear temperature profile on a leg of the TEG module is identified. The temperature profile of the substrate surfaces is non-uniform, especially in the contacted areas between the straps (tabs) and the substrates.The work is supported by EPSRC SUPERGEN Solar Challenge with grant: EP/K022156/1-Scalable Solar Thermoelectrics and Photovoltaics (SUNTRAP)
A scaling law for monocrystalline PV/T modules with CCPC and comparison with triple junction PV cells
This is the final version of the article. Available from Elsevier via the DOI in this record.Scaling laws serve as a tool to convert the five parameters in a lumped one-diode electrical model of a photovoltaic (PV) cell/module/panel under indoor standard test conditions (STC) into the parameters under any outdoor conditions. By using the transformed parameters, a current-voltage curve can be established under any outdoor conditions to predict the PV cell/module/panel performance. A scaling law is developed for PV modules with and without crossed compound parabolic concentrator (CCPC) based on the experimental current-voltage curves of six flat monocrystalline PV modules collected from literature at variable irradiances and cell temperatures by using nonlinear least squares method. Experiments are performed to validate the model and method on a monocrystalline PV cell at various irradiances and cell temperatures. The proposed scaling law is compared with the existing one, and the former exhibits a much better accuracy when the cell temperature is higher than 40 °C. The scaling law of a triple junction flat PV cell is also compared with that of the monocrystalline cell and the CCPC effects on the scaling law are investigated with the monocrystalline PV cell. It is identified that the CCPCs impose a more significant influence on the scaling law for the monocrystalline PV cell in comparison with the triple junction PV cell. The proposed scaling law is applied to predict the electrical performance of PV/thermal modules with CCPC.The authors gratefully acknowledge the EPSRC Solar Challenge project SUNTRAP (EP/K022156/1) and Sȇr Cymru National Research Network grant 152 for financial support in the UK
A scaling law for monocrystalline PV/T modules with CCPC and comparison with triple junction PV cells
Scaling laws serve as a tool to convert the five parameters in a lumped one-diode electrical model of a photovoltaic (PV) cell/module/panel under indoor standard test conditions (STC) into the parameters under any outdoor conditions. By using the transformed parameters, a current-voltage curve can be established under any outdoor conditions to predict the PV cell/module/panel performance. A scaling law is developed for PV modules with and without crossed compound parabolic concentrator (CCPC) based on the experimental current-voltage curves of six flat monocrystalline PV modules collected from literature at variable irradiances and cell temperatures by using nonlinear least squares method. Experiments are performed to validate the model and method on a monocrystalline PV cell at various irradiances and cell temperatures. The proposed scaling law is compared with the existing one, and the former exhibits a much better accuracy when the cell temperature is higher than 40 °C. The scaling law of a triple junction flat PV cell is also compared with that of the monocrystalline cell and the CCPC effects on the scaling law are investigated with the monocrystalline PV cell. It is identified that the CCPCs impose a more significant influence on the scaling law for the monocrystalline PV cell in comparison with the triple junction PV cell. The proposed scaling law is applied to predict the electrical performance of PV/thermal modules with CCPC
A coupled optical-thermal-electrical model to predict the performance of hybrid PV/T-CCPC roof-top systems
A crossed compound parabolic concentrator (CCPC) is applied into a photovoltaic/thermal (PV/T) hybrid solar collector, i.e. concentrating PV/T (CPV/T) collector, to develop new hybrid roof-top CPV/T systems. However, to optimise the system configuration and operational parameters as well as to predict their performances, a coupled optical, thermal and electrical model is essential. We establish this model by integrating a number of submodels sourced from literature as well as from our recent work on incidence-dependent optical efficiency, six-parameter electrical model and scaling law for outdoor conditions. With the model, electrical performance and cell temperature are predicted on specific days for the roof-top systems installed in Glasgow, Penryn and Jaen. Results obtained by the proposed model reasonably agree with monitored data and it is also clarified that the systems operate under off-optimal operating condition. Long-term electric performance of the CPV/T systems is estimated as well. In addition, effects of transient terms in heat transfer and diffuse solar irradiance on electric energy are identified and discussed
Scalable solar thermoelectrics and photovoltaics (SUNTRAP)
This is the final version of the article. Available from AIP Publishing via the DOI in this record.This paper presents the design, manufacture and electrical test of a novel integrated III:V low concentrator photovoltaic and thermoelectric device for enhanced solar energy harvesting efficiency. The PCB-based platform is a highly reliable means of controlling CPV cell operational temperature under a range of irradiance conditions. The design enables reproducible data acquisition from CPV solar cells whilst minimizing transient time for solid state cooling capability.The authors would like to acknowledge the Sêr Cymru National Research Network and EPSRC for financial
support
- …