90 research outputs found

    Implantierbare Portsysteme zur Chemotherapie – eine Erleichterung für Patienten und Personal

    Full text link
    Die Technik der Portimplantation durch Direktpunktion der Vena subclavia wird dargestellt. Darüberhinaus wird auf die Vor- und Nachteile des Infusionsports eingegangen einschließlich möglicher Komplikationen

    Neutron energy analysis by silicon prisms

    Get PDF
    Neutron energy analysing allows to measure at di fferent wavelengths at the same time thus avoiding losses due to monochromatization. We built and tested a refractive energy analysing device made from small prisms, where losses only occur due to the attenuation in the material. We measured the refraction and the transmission of MgF2 and Si prisms at the V14 reflectometer in Berlin at 4.9 Angstroem to check their applicability. The experimentally determined linear attenuation coe cients are 0.055 cm 1 for the MgF2 and 0.03 cm 1 for the Si prisms. An energy analyser consisting of silicon prism layers was measured at the EROS reflectometer at the LLB in a white neutron beam. The useful wavelength band was 2.4 to 7.6 Angstroem . At 6.7 Angstroem a wavelength resolution of 5 and a transmission of 53 were achieved. The surface roughness of the prisms could be determined to be 0.011 0.006 de

    Erleichterung der Chemotherapie durch implantierbare Portkatheter-Systeme bei Patientinnen mit gynäkologischen Tumoren

    Full text link
    Diese retrospektive Auswertung von Langzeiterfahrungen mit voll implantierbaren Portkatheter-Systemen an 122 onkologischen Patientinnen (63% Mammakarzinome) vergleicht ihre Ergebnisse mit der Literatur, untersucht, ob ein hoher Anteil von Mammakarzinom-Patientinnen mit Voroperationen signifikante Abweichungen ergibt und wertet eine Befragung über die Akzeptanz der Ports aus: Bei 5,7% war die Implantation unmöglich, 14,9% entwickelten Komplikationen, bei 9,6% war die Explantation erforderlich. Postoperative Komplikationen waren 7,9% Entzündungen (davon 3,5% mit Thrombose), 2,6% Thrombosen, 3,5% Katheterleck und -dislokation und 0,9% Hautnekrose. Alle Ergebnisse liegen innerhalb der von der Literatur beschriebenen Häufigkeiten inkl. mittlerer Liegedauer der Ports und Explantationsrate. Mammakarzinom-Patientinnen weisen eine durchschnittliche Rate später Komplikationen (14,3%), jedoch eine erhöhte Rate frustraner Implantationsversuche auf. Die Befragung ergibt eine gute Akzeptanz der Ports

    Quantum size effects in quasi-free-standing Pb layers

    Get PDF

    Quality assurance of the Brewer UV measurements in Finland

    No full text
    International audienceThe quality assurance of the two Brewer spectrophotometers of the Finnish Meteorological Institute is discussed in this paper. The complete data processing chain from raw signal to high quality spectra is presented. The quality assurance includes daily maintenance, laboratory characterizations, calculation of long term spectral responsivity, data processing and quality assessment. The cosine correction of the measurements is based on a new method, and included in the data processing software. The results showed that the actual cosine correction factor of the Finnish Brewers can vary between 1.08?1.13 and 1.08?1.12, respectively, depending on the sky radiance distribution and wavelength. The temperature characterization showed a linear temperature dependence between the internal temperature and the photon counts per cycle, and a temperature correction was used for correcting the measurements. The long term spectral responsivity was calculated using time series of several lamps using two slightly different methods. The long term spectral responsivity was scaled to the irradiance scale of the Helsinki University of Technology (HUT) for the whole measurement time periods 1990?2006 and 1995?2006 for Sodankylä and Jokioinen, respectively. Both Brewers have participated in many international spectroradiometer comparisons, and have shown good stability. The differences between the Brewers and the portable reference spectroradiometer QASUME have been within 5% during 2002?2007

    Influence of the substrate lattice structure on the formation of Quantum Well States in thin In and Pb films on silicon

    Full text link
    The substrate lattice structure may have a considerable influence on the formation of quantum well states in a metal overlayer material. Here we study three model systems using angle resolved photoemission and low energy electron diffraction: indium films on Si(111) and indium and lead on Si(100). Data are compared with theoretical predictions based on density functional theory. We find that the interaction between the substrate and the overlayer strongly influences the formation of quantum well states; indium layers only exhibit well defined quantum well states when the layer relaxes from an initial face-centered cubic to the bulk body-centered tetragonal lattice structure. For Pb layers on Si(100) a change in growth orientation inhibits the formations of quantum well states in films thicker than 2 ML.Comment: 16 pages, 7 figure

    Quality assurance of the Brewer spectral UV measurements in Finland

    Get PDF
    The quality assurance of the two Brewer spectrophotometers of the Finnish Meteorological Institute is discussed in this paper. The complete data processing chain from raw signal to high quality spectra is presented. The quality assurance includes daily maintenance, laboratory characterizations, calculation of long-term spectral responsivity, data processing and quality assessment. The cosine correction of the measurements is based on a new method, and is included in the data processing software. The results showed that the actual cosine correction factor of the two Finnish Brewers can vary between 1.08–1.13 and 1.08–1.12, respectively, depending on the sky radiance distribution and wavelength. The temperature characterization showed a linear temperature dependence between the instruments' internal temperature and the photon counts per cycle, and a temperature correction was used for correcting the measurements. The long-term spectral responsivity was calculated using the time series of several lamps using two slightly different methods. The long-term spectral responsivity was scaled to the irradiance scale of the Helsinki University of Technology (HUT) for the whole of the measurement time-periods 1990–2006 and 1995–2006 for Sodankylä and Jokioinen, respectively. Both Brewers have participated in many international spectroradiometer comparisons, and have shown good stability. The differences between the Brewers and the portable reference spectroradiometer QASUME have been within 5% during 2002–2007

    Intercomparison of erythemal broadband radiometers calibrated by seven UV calibration facilities in Europe and the USA

    No full text
    International audienceA bi-lateral intercomparison of erythemal broadband radiometers was performed between seven UV calibration facilities. The owners calibrations were compared relative to the characterisation and calibration performed at PMOD/WRC in Davos, Switzerland. The calibration consisted in the determination of the spectral and angular response of the radiometer, followed by an absolute calibration performed outdoors relative to a spectroradiometer which provided the absolute reference. The characterization of the detectors in the respective laboratories are in good agreement: The determination of the angular responses have deviations below ±4% and the spectral responses agree within ±20%. A "blind" intercomparison of the erythemally weighted irradiances derived by the respective institutes and PMOD/WRC showed consistent measurements to within ±2% for the majority of institutes. One institute showed slightly larger deviation of 10%. The differences found between the different instrument calibrations are all within the combined uncertainty of the calibration

    An Ontological Approach to Inform HMI Designs for Minimizing Driver Distractions with ADAS

    Get PDF
    ADAS (Advanced Driver Assistance Systems) are in-vehicle systems designed to enhance driving safety and efficiency as well as comfort for drivers in the driving process. Recent studies have noticed that when Human Machine Interface (HMI) is not designed properly, an ADAS can cause distraction which would affect its usage and even lead to safety issues. Current understanding of these issues is limited to the context-dependent nature of such systems. This paper reports the development of a holistic conceptualisation of how drivers interact with ADAS and how such interaction could lead to potential distraction. This is done taking an ontological approach to contextualise the potential distraction, driving tasks and user interactions centred on the use of ADAS. Example scenarios are also given to demonstrate how the developed ontology can be used to deduce rules for identifying distraction from ADAS and informing future designs
    corecore