Modally Resolved Fabry-Perot Experiment with Semiconductor Waveguides

Based on the interaction between different spatial modes, semiconductor Bragg-reflection waveguides provide a highly functional platform for non-linear optics. Therefore, the control and engineering of the properties of each spatial mode is essential. Despite the multimodeness of our waveguide, the well-established Fabry-Perot technique for recording fringes in the optical transmission spectrum can successfully be employed for a detailed linear optical characterization when combined with Fourier analysis. A prerequisite for the modal sensitivity is a finely resolved transmission spectrum that is recorded over a broad frequency band. Our results highlight how the features of different spatial modes, such as their loss characteristics and dispersion properties, can be separated from each other allowing their comparison. The mode-resolved measurements are important for optimizing the performance of such multimode waveguides by tailoring the properties of their spatial modes.Comment: 8 pages, 7 figure

Multi-dimensional laser spectroscopy of exciton-polaritons with spatial light modulators

We describe an experimental system that allows one to easily access the dispersion curve of exciton-polaritons in a microcavity. Our approach is based on two spatial light modulators (SLM), one for changing the excitation angles (momenta), and the other for tuning the excitation wavelength. We show that with this setup, an arbitrary number of states can be excited accurately and that re-configuration of the excitation scheme can be done at high speed.Comment: 4 pages, 5 figure

Uncovering dispersion properties in semiconductor waveguides to study photon-pair generation

This work was supported by the FWF through project no. I-2065-N27, the DFG Project no. SCHN1376/2-1, the ERC project EnSeNa (257531) and the State of Bavaria.We investigate the dispersion properties of ridge Bragg-reflection waveguides to deduce their phasematching characteristics. These are crucial for exploiting them as sources of parametric down-conversion (PDC). In order to estimate the phasematching bandwidth we first determine the group refractive indices of the interacting modes via Fabry–Perot experiments in two distant wavelength regions. Second, by measuring the spectra of the emitted PDC photons, we gain access to their group index dispersion. Our results offer a simple approach for determining the PDC process parameters in the spectral domain, and provide important feedback for designing such sources, especially in the broadband case.Publisher PDFPeer reviewe

Long-Time Behavior of Velocity Autocorrelation Function for Interacting Particles in a Two-Dimensional Disordered System

The long-time behavior of the velocity autocorrelation function (VACF) is investigated by the molecular dynamics simulation of a two-dimensional system which has both a many-body interaction and a random potential. With strengthening the random potential by increasing the density of impurities, a crossover behavior of the VACF is observed from a positive tail, which is proportional to t^{-1}, to a negative tail, proportional to -t^{-2}. The latter tail exists even when the density of particles is the same order as the density of impurities. The behavior of the VACF in a nonequilibrium steady state is also studied. In the linear response regime the behavior is similar to that in the equilibrium state, whereas it changes drastically in the nonlinear response regime.Comment: 12 pages, 5 figure

Charged quantum dot micropillar system for deterministic light-matter interactions

This work was funded by the Future Emerging Technologies (FET) programme within the Seventh Framework Programme for Research of the European Commission, FET-Open, FP7-284743 [project Spin Photon Angular Momentum Transfer for Quantum Enabled Technologies (SPANGL4Q)] and the German Ministry of Education and research (BMBF) and Engineering and Physical Sciences Research Council (EPSRC) [project Solid State Quantum Networks (SSQN)]. J.G.R. is sponsored by the EPSRC fellowship EP/M024458/1.Quantum dots (QDs) are semiconductor nanostructures in which a three-dimensional potential trap produces an electronic quantum confinement, thus mimicking the behavior of single atomic dipole-like transitions. However, unlike atoms, QDs can be incorporated into solid-state photonic devices such as cavities or waveguides that enhance the light-matter interaction. A near unit efficiency light-matter interaction is essential for deterministic, scalable quantum-information (QI) devices. In this limit, a single photon input into the device will undergo a large rotation of the polarization of the light field due to the strong interaction with the QD. In this paper we measure a macroscopic (∼6∘) phase shift of light as a result of the interaction with a negatively charged QD coupled to a low-quality-factor (Q∼290) pillar microcavity. This unexpectedly large rotation angle demonstrates that this simple low-Q-factor design would enable near-deterministic light-matter interactions.Publisher PDFPeer reviewe

Towards spin state tailoring of charged excitons in InGaAs quantum dots using oblique magnetic fields

We investigate the effect of oblique magnetic field configurations on a singly-charged self-assembled quantum dot system as a means to tune the spin composition of the ground electron spin eigenstates. Using magneto-optical spectroscopy and Stokes polarimetry techniques, we evaluate the anisotropic g-factors and characterize the polarization properties of the charged quantum dot system under oblique fields. We compare the results to a simple model that captures the resulting level structure and polarization selection rules for arbitrary magnetic field orientations. Under oblique magnetic fields, the system’s ground spin eigenstates are composed of unequal superpositions of the electron spins. This provides an additional degree of freedom to tailor the composition of the ground spin states in charged quantum dots and based on this we demonstrate spin pumping and initialization of the tailored ground states, confirming that the double-Λ level structure of the charged quantum dot persists in oblique magnetic fields. These combined results show that the uneven weightings of the tailored spin states can yield systems with interesting behaviors, with potential towards developing spin-selective readout schemes to further enhance the capabilities of spin qubits

Semi-automatic engineering and tailoring of high-efficiency Bragg-reflection waveguide samples for quantum photonic applications

Austrian Science Fund (FWF) (I-2065, J-4125); German Research Foundation (DFG) (SCHN1376/2-1); European Research Council (ERC) (EnSeNa 257531); State of Bavaria; China Scholarship Council (201503170272)Semiconductor alloys of aluminum gallium arsenide (AlGaAs) exhibit strong second-order optical nonlinearities. This makes them prime candidates for the integration of devices for classical nonlinear optical frequency conversion or photon-pair production, for example, through the parametric down-conversion (PDC) process. Within this material system, Bragg-reflection waveguides (BRW) are a promising platform, but the specifics of the fabrication process and the peculiar optical properties of the alloys require careful engineering. Previously, BRW samples have been mostly derived analytically from design equations using a fixed set of aluminum concentrations. This approach limits the variety and flexibility of the device design. Here, we present a comprehensive guide to the design and analysis of advanced BRW samples and show how to automatize these tasks. Then, nonlinear optimization techniques are employed to tailor the BRW epitaxial structure towards a specific design goal. As a demonstration of our approach, we search for the optimal effective nonlinearity and mode overlap which indicate an improved conversion efficiency or PDC pair production rate. However, the methodology itself is much more versatile as any parameter related to the optical properties of the waveguide, for example the phasematching wavelength or modal dispersion, may be incorporated as design goals. Further, we use the developed tools to gain a reliable insight in the fabrication tolerances and challenges of real-world sample imperfections. One such example is the common thickness gradient along the wafer, which strongly influences the photon-pair rate and spectral properties of the PDC process. Detailed models and a better understanding of the optical properties of a realistic BRW structure are not only useful for investigating current samples, but also provide important feedback for the design and fabrication of potential future turn-key devices. This approach limits the variety and exibility of the device design. Here, we present a comprehensive guide to the design and analysis of advanced BRW samples and show how to automatize these tasks. Then, nonlinear optimization techniques are employed to tailor the BRW epitaxial structure towards a specific design goal. As a demonstration of our approach, we search for the optimal effective nonlinearity and mode overlap which indicate an improved conversion effciency or PDC pair production rate. However, the methodology itself is much more versatile as any parameter related to the optical properties of the waveguide, for example the phasematching wavelength or modal dispersion, may be incorporated as design goals. Further, we use the developed tools to gain a reliable insight in the fabrication tolerances and challenges of real-world sample imperfections. One such example is the common thickness gradient along the wafer, which strongly influences the photon-pair rate and spectral properties of the PDC process. Detailed models and a better understanding of the optical properties of a realistic BRW structure are not only useful for investigating current samples, but also provide important feedback for the design and fabrication of potential future turn-key devices.PostprintPeer reviewe

Gate-tunable, normally-on to normally-off memristance transition inpatterned LaAlO3/SrTiO3 interfaces

The authors gratefully acknowledge the support from the state of Bavaria as well as from the Deutsche Forschungsgemeinschaft (FOR1162 and SFB1170).We report gate-tunable memristive switching in patterned LaAlO3/SrTiO3 interfaces at cryogenic temperatures. The application of voltages in the order of a few volts to the back gate of the device allows controlling and switching on and -off the inherent memory functionality (memristance). For large and small gate voltages a simple non-linear resistance characteristic is observed while a pinched hysteresis loop and memristive switching occurs in an intermediate voltage range. The memristance is further controlled by the density of oxygen vacancies, which is tuned by annealing the sample at 300 °C in nitrogen atmosphere. Depending on the annealing time the memristance at zero gate voltage can be switched on and off leading to normally-on and normally-off memristors. The presented device offers reversible and irreversible control of memristive characteristics by gate voltages and annealing, respectively, which may allow to compensate fabrication variabilities of memristors that complicate the realization of large memristor-based neural networks.PostprintPeer reviewe

Quantum modulation of a coherent state wavepacket with a single electron spin

The interaction of quantum objects lies at the heart of fundamental quantum physics and is key to a wide range of quantum information technologies. Photon-quantum-emitter interactions are among the most widely studied. Two-qubit interactions are generally simplified into two quantum objects in static well-defined states . In this work we explore a fundamentally new dynamic type of spin-photon interaction. We demonstrate modulation of a coherent narrowband wavepacket with another truly quantum object, a quantum dot with ground state spin degree of freedom. What results is a quantum modulation of the wavepacket phase (either 0 or {\pi} but no values in between), a new quantum state of light that cannot be described classically.Comment: Supplementary Information available on reques

Temporally versatile polarization entanglement from Bragg reflection waveguides

This work was supported by the FWF through project no. I-2065-N27, the DFG Project no. SCHN1376/2-1, the ERC project EnSeNa (257531) and the State of Bavaria.Bragg reflection waveguides emitting broadband parametric downconversion (PDC) have been proven to be well suited for the on-chip generation of polarization entanglement in a straightforward fashion [Sci. Rep. 3, 2314 (2013)]. Here, we investigate how the properties of the created states can be modified by controlling the relative temporal delay between the pair of photons created via PDC. Our results offer an easily accessible approach for changing the coherence of the polarization entanglement, in other words, to tune the phase of the off-diagonal elements of the density matrix. Furthermore, we provide valuable insight into the engineering of these states directly at the source.PostprintPeer reviewe