IoT enabled Environmental Monitoring System

Nowadays, global warming poses a serious threat to our planet. For this reason, the reduction of the gas emitted into the atmosphere is increasingly sought for its purpose. Wireless Sensor Network (WSN) to monitor the concentration of carbon dioxide can therefore be helpful in monitoring air quality. In this research, the integration of wireless sensor networks into IoT is implemented for environmental monitoring. Subsequently, a practical case is described consisting in the implementation of a driver for reading the value of the environmental CO2 concentration, through a sensor with NDIR technology. This paper presents a customized design of an IoT enabled environment monitoring system to monitor CO2 concentrations. Moreover, the performance of low-cost Non-Dispersive Infra-Red (NDIR) was assessed. Thereafter, data related to the operation of the sensor will be graphically reported, as well as a sampling window that is executed to perform the measurement. Finally, possible future developments of the driver will be presente

Improved phosphate‐based glass fiber performance achieved through acid etch/polydopamine treatment

Phosphate based glass fibres (PGF) are of interest as reinforcements for degradable implants, but have seen limited application due to their rapid loss of strength when subjected to aqueous conditions. Previous studies have utilised heat treatments to improve longer term strength retention at a significant cost to initial strength. In this study, acid etching is used to recover the initial fibre strength after heat treatment and a subsequent coating of polydopamine is applied to provide longer term retention of this recovered strength. After an initial loss of strength after heat treatment (1135-> 509 MPa), an optimised combination of acid treatment and polydopamine coating was able to recover to approximately 85% of the initial strength (969 MPa). The result was significant in comparison to acid treatment (647 MPa) or coating (688 MPa) alone. The combined acid/coating treatment was demonstrated to maintain fibre properties for at least 14 days, although the amount of polydopamine coating was observed to decrease over this period. The approach reported here is of importance as it offers the require

Experimental conditions affect the outcome of Plasmodium falciparum platelet-mediated clumping assays

<p>Abstract</p> <p>Background</p> <p>Platelet-mediated clumping of <it>Plasmodium falciparum</it>-infected erythrocytes (IE) is a parasite adhesion phenotype that has been associated with severe malaria in some, but not all, field isolate studies. A variety of experimental conditions have been used to study clumping <it>in vitro</it>, with substantial differences in parasitaemia (Pt), haematocrit (Ht), and time of reaction between studies. It is unknown whether these experimental variables affect the outcome of parasite clumping assays.</p> <p>Methods</p> <p>The effects of Pt (1, 4 and 12%), Ht (2, 5 and 10%) and time (15 min, 30 min, 1 h, 2 h) on the clumping of <it>P. falciparum </it>clone HB3 were examined. The effects of platelet freshness and parasite maturity were also studied.</p> <p>Results</p> <p>At low Ht (2%), the Pt of the culture has a large effect on clumping, with significantly higher clumping occurring at 12% Pt (mean 47% of IE in clumps) compared to 4% Pt (mean 26% IE in clumps) or 1% Pt (mean 7% IE in clumps) (ANOVA, p = 0.0004). Similarly, at low Pt (1%), the Ht of the culture has a large effect on clumping, with significantly higher clumping occurring at 10% Ht (mean 62% IE in clumps) compared to 5% Ht (mean 25% IE in clumps) or 2% Ht (mean 10% IE in clumps) (ANOVA, p = 0.0004). Combinations of high Ht and high Pt were impractical because of the difficulty assessing clumping in densely packed IE and the rapid formation of enormous clumps that could not be counted accurately. There was no significant difference in clumping when fresh platelets were used compared to platelets stored at 4°C for 10 days. Clumping was a property of mature pigmented-trophozoites and schizonts but not ring stage parasites.</p> <p>Conclusion</p> <p>The Pt and Ht at which <it>in vitro </it>clumping assays are set up have a profound effect on the outcome. All previous field isolate studies on clumping and malaria severity suffer from potential problems in experimental design and methodology. Future studies of clumping should use standardized conditions and control for Pt, and should take into account the limitations and variability inherent in the assay.</p

Steady-state modulation of voltage-gated K+ channels in rat arterial smooth muscle by cyclic AMP-dependent protein kinase and protein phosphatase 2B

Voltage-gated potassium channels (Kv) are important regulators of membrane potential in vascular smooth muscle cells, which is integral to controlling intracellular Ca2+ concentration and regulating vascular tone. Previous work indicates that Kv channels can be modulated by receptor-driven alterations of cyclic AMP-dependent protein kinase (PKA) activity. Here, we demonstrate that Kv channel activity is maintained by tonic activity of PKA. Whole-cell recording was used to assess the effect of manipulating PKA signalling on Kv and ATP-dependent K+ channels of rat mesenteric artery smooth muscle cells. Application of PKA inhibitors, KT5720 or H89, caused a significant inhibition of Kv currents. Tonic PKA-mediated activation of Kv appears maximal as application of isoprenaline (a β-adrenoceptor agonist) or dibutyryl-cAMP failed to enhance Kv currents. We also show that this modulation of Kv by PKA can be reversed by protein phosphatase 2B/calcineurin (PP2B). PKA-dependent inhibition of Kv by KT5720 can be abrogated by pre-treatment with the PP2B inhibitor cyclosporin A, or inclusion of a PP2B auto-inhibitory peptide in the pipette solution. Finally, we demonstrate that tonic PKA-mediated modulation of Kv requires intact caveolae. Pre-treatment of the cells with methyl-β-cyclodextrin to deplete cellular cholesterol, or adding caveolin-scaffolding domain peptide to the pipette solution to disrupt caveolae-dependent signalling each attenuated PKA-mediated modulation of the Kv current. These findings highlight a novel, caveolae-dependent, tonic modulatory role of PKA on Kv channels providing new insight into mechanisms and the potential for pharmacological manipulation of vascular tone

An assessment of the usefulness of a rapid immuno-chromatographic test, "Determine™ malaria pf" in evaluation of intervention measures in forest villages of central India

BACKGROUND: Plasmodium falciparum malaria, is a major health problem in forested tribal belt of central India. Rapid and accurate methods are needed for the diagnosis of P. falciparum. We performed a blinded evaluation of the recently introduced Determine™ malaria pf test (Abbott, Laboratories, Japan) compared with microscopy and splenomegaly in children in epidemic prone areas of district Mandla to assess the impact of intervention measures. METHODS: Children aged 2–10 yrs with and without fever were examined for spleen enlargement by medical specialist by establishing a mobile field clinic. From these children thick blood smears were prepared from finger prick and read by a technician. Simultaneously, rapid tests were performed by a field lab attendant. The figures for specificity, sensitivity and predictive values were calculated using microscopy as gold standard. RESULTS: In all 349 children were examined. The sensitivity and specificity for Determine rapid diagnostic test were 91 and 80% respectively. The positive predictive values (PPV), negative predictive values (NPV) and accuracy of the test were respectively 79, 91 and 85%. On the contrary, the sensitivity and specificity of spleen in detecting malaria infection were 57 and 74 % respectively with PPV of 73%, NPV 59 % and an accuracy of 65%. CONCLUSIONS: Determine™ malaria rapid diagnostic test is easier and quicker to perform and has other advantages over microscopy in not requiring prior training of personnel or quality control. Thus, highlighting the usefulness of a rapid antigen test in assessing prevailing malaria situation in remote areas

Spatial extent and historical context of North Sea oxygen depletion in August 2010

Prompted by recent observations of seasonal low dissolved oxygen from two moorings in the North Sea, a hydrographic survey in August 2010 mapped the spatial extent of summer oxygen depletion. Typical near-bed dissolved oxygen saturations in the stratified regions of the North Sea were 75–80 % while the well-mixed regions of the southern North Sea reached 90 %. Two regions of strong thermal stratification, the area between the Dooley and Central North Sea Currents and the area known as the Oyster Grounds, had oxygen saturations as low as 65 and 70 % (200 and 180 µmol dm-3) respectively. Low dissolved oxygen was apparent in regions characterised by low advection, high stratification, elevated organic matter production from the spring bloom and a deep chlorophyll maximum. Historical data over the last century from the International Council for the Exploration of the Sea oceanographic database highlight an increase in seasonal oxygen depletion and a warming over the past 20 years. The 2010 survey is consistent with, and reinforces, the signal of recent depleted oxygen at key locations seen in the (albeit sparse) historical data

High-temperature performance of ferritic steels in fireside corrosion regimes: temperature and deposits

The paper reports high temperature resistance of ferritic steels in fireside corrosion regime in terms of temperature and deposits aggressiveness. Four candidate power plant steels: 15Mo3, T22, T23 and T91 were exposed under simulated air-fired combustion environment for 1000 h. The tests were conducted at 600, 650 and 700 °C according to deposit-recoat test method. Post-exposed samples were examined via dimensional metrology (the main route to quantify metal loss), and mass change data were recorded to perform the study of kinetic behavior at elevated temperatures. Microstructural investigations using ESEM-EDX were performed in order to investigate corrosion degradation and thickness of the scales. The ranking of the steels from most to the least damage was 15Mo3 > T22 > T23 > T91 in all three temperatures. The highest rate of corrosion in all temperatures occurred under the screening deposit