44,432 research outputs found
Hydrodynamic air lubricated compliant surface bearing for an automotive gas turbine engine. 2: Materials and coatings
Material coatings for an air-lubricated, compliant journal bearing for an automotive gas turbine engine were exposed to service test temperatures of 540 C or 650 C for 300 hours, and to 10 temperature cycles from room temperatures to the service test temperatures. Selected coatings were then put on journal and partial-arc foils and tested in start-stop cycle tests at 14 kPa (2 psi) loading for 2000 cycles. Half of the test cycles were performed at a test chamber service temperature of 540 C (1000 F) or 650 C (1200 F); the other half were performed at room temperature. Based on test results, the following combinations and their service temperature limitations are recommended: HL-800 TM (CdO and graphite) on foil versus chrome carbide on journal up to 370 C (700 F); NASA PS 120 (Tribaloy 400, silver and CaF2 on journal versus uncoated foil up to 540 C (1000 F); and Kaman DES on journal and foil up to 640 C (1200 F). Kaman DES coating system was further tested successfully at 35 kPa (5 psi) loading for 2000 start-stop cycles
Recommended from our members
Identifying sources of error in cross-national questionnaires: Application of an error source typology to cognitive interview data
This article evaluates a Cross National Error Source Typology that was developed as a tool for making cross-national questionnaire design more effective. Cross-national questionnaire design has a number of potential error sources that are either not present or are less common in single nation studies. Tools that help to identify these error sources better inform the survey researcher when improving a source questionnaire that serves as the basis for translation. This article outlines the theoretical and practical development of the typology and evaluates an attempt to apply it to cross-national cognitive interviewing findings from the European Social Survey
Hydrodynamic air lubricated compliant surface bearing for an automotive gas turbine engine. 1: Journal bearing performance
A 38.1 mm (1.5 inch) diameter Hydresil Compliant Surface Air Lubricated Journal Bearing was designed and tested to obtain bearing performance characteristics at both room temperature and 315 C (600 F). Testing was performed at various speeds up to 60,000 rpm with varying loads. Rotating sensors provided an opportunity to examine the film characteristics of the compliant surface bearing. In addition to providing minimum film thickness values and profiles, many other insights into bearing operation were gained such as the influence of bearing fabrication accuracy and the influence of smooth foil deflection between the bumps
Maser Flare Simulations from Oblate and Prolate Clouds
We investigated, through numerical models, the flaring variability that may
arise from the rotation of maser clouds of approximately spheroidal geometry,
ranging from strongly oblate to strongly prolate examples. Inversion solutions
were obtained for each of these examples over a range of saturation levels from
unsaturated to highly saturated. Formal solutions were computed for rotating
clouds with many randomly chosen rotation axes, and corresponding averaged
maser light curves plotted with statistical information. The dependence of
results on the level of saturation and on the degree of deformation from the
spherical case were investigated in terms of a variability index and duty
cycle. It may be possible to distinguish observationally between flares from
oblate and prolate objects. Maser flares from rotation are limited to long
timescales (at least a few years) and modest values of the variability index
(), and can be aperiodic or quasi-periodic. Rotation is therefore
not a good model for HO variability on timescales of weeks to months, or of
truly periodic flares.Comment: 11 pages, 12 figures, accepted for publication in MNRA
Auxin regulates SCFTIR1-dependent degradation of AUX/IAA proteins
The plant hormone auxin is central in many aspects of plant development. Previous studies have implicated the ubiquitin-ligase SCFTIR1 and the AUX/IAA proteins in auxin response. Dominant mutations in several AUX/IAA genes confer pleiotropic auxin-related phenotypes, whereas recessive mutations affecting the function of SCFTIR1 decrease auxin response. Here we show that SCFTIR1 is required for AUX/IAA degradation. We demonstrate that SCFTIR1 interacts with AXR2/IAA7 and AXR3/IAA17, and that domain II of these proteins is necessary and sufficient for this interaction. Further, auxin stimulates binding of SCFTIR1 to the AUX/IAA proteins, and their degradation. Because domain II is conserved in nearly all AUX/IAA proteins in Arabidopsis, we propose that auxin promotes the degradation of this large family of transcriptional regulators, leading to diverse downstream effects
Measuring the muon's anomalous magnetic moment to 0.14 ppm
The anomalous magnetic moment (g-2) of the muon was measured with a precision
of 0.54 ppm in Experiment 821 at Brookhaven National Laboratory. A difference
of 3.2 standard deviations between this experimental value and the prediction
of the Standard Model has persisted since 2004; in spite of considerable
experimental and theoretical effort, there is no consistent explanation for
this difference. This comparison hints at physics beyond the Standard Model,
but it also imposes strong constraints on those possibilities, which include
supersymmetry and extra dimensions. The collaboration is preparing to relocate
the experiment to Fermilab to continue towards a proposed precision of 0.14
ppm. This will require 20 times more recorded decays than in the previous
measurement, with corresponding improvements in the systematic uncertainties.
We describe the theoretical developments and the experimental upgrades that
provide a compelling motivation for the new measurement.Comment: 5 pages, 1 figure, presented at International Nuclear Physics
Conference 2010 (INPC 2010
Summary of Workshop to Review an OMB Report on Regulatory Risk Assessment and Management
Summary of the results of an invitational workshop conducted to peer review the 1990 OMB report, CURRENT REGULATORY ISSUES IN Risk ASSESSMENT AND Risk MANAGENMENTIN REGULATORY PROGRAM OF THE UNITED STATES GOVERNMENT, APRIL 1, 1990 - MARCH 31, 1991
- …