Mesosphere-Lower-Thermosphere Neutral Density Measurements from Low-cost COTS Accelerometers and Ionization Gauge

Measurements of aerodynamic drag on objects can be used to determine the density of the medium provided other variables are known. The Space and Atmospheric Instrumentation Laboratory launched a midlatitude sounding rocket named SpEED Demon from Wallops Flight Facility in August 2022. Among the instruments onboard were sensitive low-cost MEMS accelerometers allowing for neutral density measurements through the drag technique up to 100km in altitude. In addition to sensitive accelerometers on the main payload, four ejectable subpayloads also carry an accelerometer providing simultaneous multi-point neutral density measurements, akin to a ‘falling cylinder’ experiment. We present the flight performance and results of this drag-based density measurement technique from the SpEED Demon launch. Drag-derived density results are compared with density measurements from an ionization gauge instrument and the MSIS atmospheric model to provide validation of the technique, showing agreement within 10% in the 80-100km altitude range

Low Cost Magnetometer Calibration and Distributed Simultaneous Multipoint Ionospheric Measurements from a Sounding Rocket Platform

Low cost and low size-weight-and-power magnetometers can provide greater accessibility for distributed simultaneous measurements in the ionosphere, either onboard sounding rockets or on CubeSats. The Space and Atmospheric Instrumentation Laboratory at Embry-Riddle Aeronautical University launched a midlatitude sounding rocket named SpEED Demon from Wallops Flight Facility in August 2022. SpEED Demon has a comprehensive suite of instruments for electrodynamics and neutral dynamics measurements. Among this suite is one high performance Billingsley magnetometer (TFM65VQS) and six commercial-off-the-shelf magnetometers manufactured by the PNI Corporation (RM3100). Of the six, two PNI magnetometers are situated on a deployable boom on the main payload that also carries the Billingsley magnetometer. The remaining four PNI magnetometers are distributed among four ejectable subpayloads. These low-cost and low SWaP magnetometers can achieve a resolution of approximately 1.5 nT and a precision of +/- 4 nT (one sigma) at 15 Hz in a uniform magnetic field. This performance is sufficient for detecting and measuring field aligned currents as well as a variety of other geomagnetic disturbances. The magnetometers are calibrated against an independently calibrated flux-gate magnetometer inside a Helmholtz cage. Zero field offsets are quantified inside a triple-layer mu-metal zero gauss chamber. This work will present the calibration process, the calibration results, and the flight performance of these sensors from the SpEED Demon sounding rocket launch

System Engineering Paper

The Iowa State University team, Team LunaCY, is composed of the following sub-teams: the main student organization, the Lunabotics Club; a senior mechanical engineering design course, ME 415; a senior multidisciplinary design course, ENGR 466; and a senior design course from Wartburg College in Waverly, Iowa. Team LunaCY designed and fabricated ART-E III, Astra Robotic Tractor- Excavator the Third, for the team's third appearance in the NASA Lunabotic Mining competition. While designing ART-E III, the team had four main goals for this year's competition:to reduce the total weight of the robot, to increase the amount of regolith simulant mined, to reduce dust, and to make ART-E III autonomous. After many designs and research, a final robot design was chosen that obtained all four goals of Team LunaCY. A few changes Team LunaCY made this year was to go to the electrical, computer, and software engineering club fest at Iowa State University to recruit engineering students to accomplish the task of making ART-E III autonomous. Team LunaCY chose to use LabView to program the robot and various sensors were installed to measure the distance between the robot and the surroundings to allow ART-E III to maneuver autonomously. Team LunaCY also built a testing arena to test prototypes and ART-E III in. To best replicate the competition arena at the Kennedy Space Center, a regolith simulant was made from sand, QuickCrete, and fly ash to cover the floor of the arena. Team LunaCY also installed fans to allow ventilation in the arena and used proper safety attire when working in the arena . With the additional practice in the testing arena and innovative robot design, Team LunaCY expects to make a strong appearance at the 2012 NASA Lunabotic Mining Competition.

Investigating Behaviour and Population Dynamics of Striped Marlin (Kajikia audax) from the Southwest Pacific Ocean with Satellite Tags

Behaviour and distribution of striped marlin within the southwest Pacific Ocean were investigated using electronic tagging data collected from 2005–2008. A continuous-time correlated random-walk Kalman filter was used to integrate double-tagging data exhibiting variable error structures into movement trajectories composed of regular time-steps. This state-space trajectory integration approach improved longitude and latitude error distributions by 38.5 km and 22.2 km respectively. Using these trajectories as inputs, a behavioural classification model was developed to infer when, and where, ‘transiting’ and ‘area-restricted’ (ARB) pseudo-behavioural states occurred. ARB tended to occur at shallower depths (108±49 m) than did transiting behaviours (127±57 m). A 16 day post-release period of diminished ARB activity suggests that patterns of behaviour were affected by the capture and/or tagging events, implying that tagged animals may exhibit atypical behaviour upon release. The striped marlin in this study dove deeper and spent greater time at ≥200 m depth than those in the central and eastern Pacific Ocean. As marlin reached tropical latitudes (20–21°S) they consistently reversed directions, increased swimming speed and shifted to transiting behaviour. Reversals in the tropics also coincided with increases in swimming depth, including increased time ≥250 m. Our research provides enhanced understanding of the behavioural ecology of striped marlin. This has implications for the effectiveness of spatially explicit population models and we demonstrate the need to consider geographic variation when standardizing CPUE by depth, and provide data to inform natural and recreational fishing mortality parameters

Exposure to general anesthesia and risk of alzheimer's disease: a systematic review and meta-analysis

<p>Abstract</p> <p>Background</p> <p>Alzheimer's disease (AD) is common among older adults and leads to significant disability. Volatile anesthetic gases administered during general anesthesia (GA) have been hypothesized to be a risk factor for the development of AD. The objective of this study is to systematically review the association between exposure to GA and risk of AD.</p> <p>Methods</p> <p>We searched electronic databases including MEDLINE, Embase, and Google scholar for observational studies examining the association between exposure to GA and risk of AD. We examined study quality using a modified version of the Newcastle-Ottawa risk of bias assessment for observational studies. We used standard meta-analytic techniques to estimate pooled odds ratios (OR) and 95% confidence intervals (CI). Subgroup and sensitivity analyses were undertaken to evaluate the robustness of the findings.</p> <p>Results</p> <p>A total of 15 case-control studies were included in the review. No cohort studies were identified that met inclusion criteria. There was variation in the methodological quality of included studies. There was no significant association between any exposure to GA and risk of AD (pooled OR: 1.05; 95% CI: 0.93 - 1.19, Z = 0.80, <it>p </it>= 0.43). There was also no significant association between GA and risk of AD in several subgroup and sensitivity analyses.</p> <p>Conclusions</p> <p>A history of exposure to GA is not associated with an increased risk of AD although there are few high-quality studies in this area. Prospective cohort studies with long-term follow-up or randomized controlled trials are required to further understand the association between GA and AD.</p

Combined Point-of-Care Nucleic Acid and Antibody Testing for SARS-CoV-2 following Emergence of D614G Spike Variant

Rapid COVID-19 diagnosis in the hospital is essential, although this is complicated by 30%–50% of nose/throat swabs being negative by SARS-CoV-2 nucleic acid amplification testing (NAAT). Furthermore, the D614G spike mutant dominates the pandemic and it is unclear how serological tests designed to detect anti-spike antibodies perform against this variant. We assess the diagnostic accuracy of combined rapid antibody point of care (POC) and nucleic acid assays for suspected COVID-19 disease due to either wild-type or the D614G spike mutant SARS-CoV-2. The overall detection rate for COVID-19 is 79.2% (95% CI 57.8–92.9) by rapid NAAT alone. The combined point of care antibody test and rapid NAAT is not affected by D614G and results in very high sensitivity for COVID-19 diagnosis with very high specificity

Combined point of care nucleic acid and antibody testing for SARS-CoV-2 following emergence of D614G Spike Variant

Rapid COVID-19 diagnosis in hospital is essential, though complicated by 30-50% of nose/throat swabs being negative by SARS-CoV-2 nucleic acid amplification testing (NAAT). Furthermore, the D614G spike mutant now dominates the pandemic and it is unclear how serological tests designed to detect anti-Spike antibodies perform against this variant. We assess the diagnostic accuracy of combined rapid antibody point of care (POC) and nucleic acid assays for suspected COVID-19 disease due to either wild type or the D614G spike mutant SARS-CoV-2. The overall detection rate for COVID-19 is 79.2% (95CI 57.8-92.9%) by rapid NAAT alone. Combined point of care antibody test and rapid NAAT is not impacted by D614G and results in very high sensitivity for COVID-19 diagnosis with very high specificity