Educating Engineers as Global Citizens: A Call for Action / A Report of the National Summit Meeting on the Globalization of Engineering Education

On November 5-6, 2008, a group of 23 distinguished engineering educators convened in Newport, Rhode Island to discuss the globalization of U. S. engineering education. Their goal was to consider the changes and challenges brought about by the recent wave of globalization and to ask, as so many colleagues are doing around the country, what proactive steps need to be taken by engineering educators to ensure that their graduates are prepared to be productive citizens and professionals in today’s and tomorrow’s complex world. Encouraged and supported by the National Science Foundation (NSF) and its Division of Engineering Education and Centers, the group began its meeting with observations and advice from three executives in the contemporary global business arena. It was then tasked with a review of the rationale for incorporating global perspectives and skills into the engineering curriculum, as well as the urgency for doing so. The reasons for the generally slow response among engineering educators to this matter nationally, when compared to other nations in the industrialized world, were also explored. After consideration of the potential impact of the current economic downturn on this issue, the summit reviewed information about existing successful models and best practices for a more global engineering education at colleges and universities across the country in an attempt to answer the following questions: To what extent are American engineering programs sending their students abroad? What have we learned and what are the successful models and strategies for globalizing U.S. engineering education? What can be shared with the profession at large and by what means? The group concluded its work with a set of recommendations for funding agencies such as NSF, as well as a strong and succinct call to the profession at large for action, in the form of a document included in this report, entitled The Newport Declaration. The following is a summative and detailed report of this meeting, based in part on a set of papers and documents which had been prepared in advance and were then revised to include the benefit of the group’s discussions

Dispersion mécanique de l'or dans les matériaux de surface : exemple du site aurifère de Piéla (Burkina-Faso)

A Piéla, l'or primaire est associé à des filons de quartz, dans une zone de cisaillement des formations volcano-sédimentaires birimiennes (Protérozoïque inférieur). La présence d'or a également été mise en évidence dans les matériaux superficiels latéritiques bien que les roches sous-jacentes et leurs altérites soient en général stériles. L'étude de la répartition de l'or sur les différentes surfaces aplanies montre que l'or est concentré par des transferts mécaniques dans les cailloutis et graviers de cuirasse ferrugineuse et de quartz de la plaine alluviale et dans des portions du moyen-glacis cuirassé assimilables à une ancienne terrasse. Ailleurs sur les surfaces cuirassées (haut-glacis, moyen-glacis), l'or est dispersé à faible teneur ou absent. Les caractères morphologiques et chimiques des particules d'or évoluent depuis la zone minéralisée jusqu'à la plaine alluviale distale ainsi que sur les glacis. Cette évolution se marque par une augmentation de l'émoussé, par des traits morphologiques spécifiques du transport mécanique (stries, bordures repliées, aplatissement) et par un lessivage de l'argent jusqu'au coeur des particules. Dans les matériaux superficiels du site de Piéla, les particules d'or présentent des degrés d'usure différents et ne montrent pas l'évolution progressive avec diminution de la taille des particules et lessivage de l'argent, souvent décrite de bas en haut des profils cuirassés sur roche mère minéralisée. (Résumé d'auteur

Reply to Comment on “The earthquakes of 29 July 2003, 12 February 2007, and 17 December 2009 in the region of Cape Saint Vincent (SW Iberia) and their relation with the 1755 Lisbon earthquake

Indeed, the Lisbon earthquake is a very unusual seismic event and an exception to the rule because most great tsunami-generating earth- quakes are related to well-defined subduction zones. The epicentral region, focal mechanism and the structures involved at the origin of this earthquake are still a matter of debate, with several models having been proposed (e.g. Baptista et al., 2003; Grandin et al., 2007a,b; Gutscher et al., 2006; Ribeiro et al., 2006; Vilanova et al., 2003; Zitellini et al., 2001)

Survey of Dairy Management Practices on One Hundred Thirteen North Central and Northeastern United States Dairies

The objective was to conduct a broad survey of dairy management practices that have an effect on animal well-being. Dairies were visited during the fall and winter of 2005 and 2006 in Wisconsin, Minnesota, Indiana, Iowa, and New York. Data were collected on 113 dairies on colostrum feeding, dehorning, tail-docking, euthanasia methods, producer statements about welfare, use of specialized calf-raising farms (custom), level of satisfaction with calf-raising by producers, and cow behavior. Calves were raised by the owner on 50.4% of dairies; 30.1% were raised on custom farms during the milk-feeding period, 18.6% were custom raised after weaning, and 1% sold calves with the option to buy them back as first-lactation heifers. A total of 51.8% of producers were very satisfied with their current calf-raising methods. Three feedings of colostrum were fed to the calves on 23.9% of dairies, 2 feedings on 39.8% of farms, 1 feeding on 31.0% of farms, and colostrum replacement products were fed on 5.3% of farms. Many farms (61.9%) provided 3.8 L at first feeding. Calves were dehorned at different ages by various methods. By 8 wk, 34.5% of calves were dehorned. By 12 wk, 78.8% of calves were dehorned. The majority of calves were dehorned by hot iron (67.3%). The remainder were dehorned by gouging (8.8%), paste (9.7%), saw (3.5%), or unknown by calf owner (10.6%). Anesthetic use was reported by 12.4% of dairy owners and analgesia use by 1.8%. Tail-docking was observed on 82.3% of dairies. The most common reported docking time was pre- or postcalving (35.2%). The second most commonly reported time was d 1 (15.4%). Rubber band was the most common method (92.5%), followed by amputation (7.5%). Three dairies amputated precalving, 1 at 2 mo and 3 at d 1 or 2. Cow hygiene was the most common reason given to dock (73.5%), followed by parlor worker comfort (17.4%) and udder health (1.0%). Producers reported 2.0% of cows obviously lame. Gun was the preferred euthanasia method (85.7%), followed by i.v. euthanasia (8.0%), live pick-up (1.8%), and nondisclosure (3.5%). Most producers (77.9%) stated that cows were in an improved environment as compared with 20 yr ago, whereas 8.0% stated conditions were worse, and 14.2% were undecided. Dairies with higher percentages of cows that either approached or touched the observer had lower somatic cell counts. The survey results showed management practices that were important for animal welfare

Evaluation of radar reflectivity factor simulations of ice crystal populations from in situ observations for the retrieval of condensed water content in tropical mesoscale convective systems

This study presents the evaluation of a technique to estimate cloud condensed water content (CWC) in tropical convection from airborne cloud radar reflectivity factors at 94 GHz and in situ measurements of particle size distributions (PSDs) and aspect ratios of ice crystal populations. The approach is to calculate from each 5 s mean PSD and flight-level reflectivity the variability of all possible solutions of m(D) relationships fulfilling the condition that the simulated radar reflectivity factor (T-matrix method) matches the measured radar reflectivity factor. For the reflectivity simulations, ice crystals were approximated as oblate spheroids, without using a priori assumptions on the mass–size relationship of ice crystals. The CWC calculations demonstrate that individual CWC values are in the range ±32 % of the retrieved average CWC value over all CWC solutions for the chosen 5 s time intervals. In addition, during the airborne field campaign performed out of Darwin in 2014, as part of the international High Altitude Ice Crystals/High Ice Water Content (HAIC/HIWC) projects, CWCs were measured independently with the new IKP-2 (isokinetic evaporator probe) instrument along with simultaneous particle imagery and radar reflectivity. Retrieved CWCs from the T-matrix radar reflectivity simulations are on average 16 % higher than the direct CWCIKP measurements. The differences between the CWCIKP and averaged retrieved CWCs are found to be primarily a function of the total number concentration of ice crystals. Consequently, a correction term is applied (as a function of total number concentration) that significantly improves the retrieved CWC. After correction, the retrieved CWCs have a median relative error with respect to measured values of only −1 %. Uncertainties in the measurements of total concentration of hydrometeors are investigated in order to calculate their contribution to the relative error of calculated CWC with respect to measured CWCIKP. It is shown that an overestimation of the concentration by about +50 % increases the relative errors of retrieved CWCs by only +29 %, while possible shattering, which impacts only the concentration of small hydrometeors, increases the relative error by about +4 %. Moreover, all cloud events with encountered graupel particles were studied and compared to events without observed graupel particles. Overall, graupel particles seem to have the largest impact on high crystal number-concentration conditions and show relative errors in retrieved CWCs that are higher than for events without graupel particles

Effect of stall base type on herd health, costs, and producer satisfaction

The objective of this field study was to compare effect of stall base on herd health, stall maintenance, bedding cost, and producer satisfaction. Ninety-one dairies visited during a 4-mo period starting October 14, 2005 included 33 rubber-filled mattress (RFM), 27 sand, and 31 waterbed (WB) dairies. In this study, percent culled was higher for RFM (P = 0.001) and sand (P = 0.06) than WB stall base dairies. Percent of cows in fourth lactation or greater was higher on WB than either RFM (P = 0.01) or sand (P = 0.02) dairies. There was no difference between base types for production or somatic cell count. Bedding cost per bed per week was WB ($0.73), RFM ($0.89), and sand ($0.97). Sand beds were bedded less frequently (P = 0.01). Comparisons between RFM and sand indicate higher satisfaction for RFM regarding manure management (P \u3c 0.0001) and higher satisfaction with sand for cow comfort (P \u3c 0.0001). Producers with WB were more satisfied with base life (P \u3c 0.000 1) and cow comfort (P \u3c 0.000 1) than those with RFM. Producers with WB were more satisfied with cow longevity (P \u3c 0.0001) as compared to RFM. Length of sand stall was correlated with longevity (0.56, P = 0.01) while percent of mature cows was greater on dairies that provided WBs (P = 0.02). This data indicates that WB may be a viable option for cows and producers, when good quality sand is unavailable or handling sand-laden manure is not feasible

Effect of stall base type on herd health, costs, and producer satisfaction

The objective of this field study was to compare effect of stall base on herd health, stall maintenance, bedding cost, and producer satisfaction. Ninety-one dairies visited during a 4-mo period starting October 14, 2005 included 33 rubber-filled mattress (RFM), 27 sand, and 31 waterbed (WB) dairies. In this study, percent culled was higher for RFM (P = 0.001) and sand (P = 0.06) than WB stall base dairies. Percent of cows in fourth lactation or greater was higher on WB than either RFM (P = 0.01) or sand (P = 0.02) dairies. There was no difference between base types for production or somatic cell count. Bedding cost per bed per week was WB ($0.73), RFM ($0.89), and sand ($0.97). Sand beds were bedded less frequently (P = 0.01). Comparisons between RFM and sand indicate higher satisfaction for RFM regarding manure management (P \u3c 0.0001) and higher satisfaction with sand for cow comfort (P \u3c 0.0001). Producers with WB were more satisfied with base life (P \u3c 0.000 1) and cow comfort (P \u3c 0.000 1) than those with RFM. Producers with WB were more satisfied with cow longevity (P \u3c 0.0001) as compared to RFM. Length of sand stall was correlated with longevity (0.56, P = 0.01) while percent of mature cows was greater on dairies that provided WBs (P = 0.02). This data indicates that WB may be a viable option for cows and producers, when good quality sand is unavailable or handling sand-laden manure is not feasible

Influence of Free-Stall Base on Tarsal Joint Lesions and Hygiene in Dairy Cows

The objective was to quantify the incidence of tarsal lesions and level of hygiene by stall bed type. Cows were scored on 100 dairies from Wisconsin, Minnesota, Indiana, Iowa, and New York in the fall and winter. Thirty-eight dairies used rubber-filled mattresses (RFM), 27 had sand beds, 29 had waterbeds, and 6 used compost packs (CPk). Stocking density, stall dimensions, bedding amount, bedding frequency, and type of bedding were recorded. One pen of early-lactation multiparous cows on each dairy was scored based on injury of the tarsal joints at the lateral and medial surfaces and tuber calcis at the dorsal, lateral, and medial surfaces. A tarsal score of 1 represented hair loss, 2 was moderate, and 3 indicated severe swelling. Differences between bed types in the percentages of cows with lesions were tested with one-way ANOVA by lesion severity and incidence, with farm as the experimental unit. Cows on sand beds or waterbeds had fewer lesion scores of 1, 2, and 3 than those on RFM. The percentages of score 1 were 54.6 ± 4.4 (RFM), 22.5 ± 4.7 (sand), and 29.8 ± 4.3 (waterbed), whereas the percentages of score 2 were 14.0 ± 1.4, 2.3 ± 1.5, and 5.0 ± 1.4, and of score 3 were 3.0 ± 0.4, 0.2 ± 0.4, and 0.4 ± 0.4. Cows on CPk had no lesions. Hygiene scores ranged from 1 to 5, with 1 being clean and 5 soiled. The percentages of hygiene score 1 were 0 (compost), 0.4 (RFM), 0.4 (sand), and 0.4 (waterbeds); those with score 2 were 79.0, 84.0 ± 0.01, 73.2 ± 0.01, and 80.4 ± 0.01; with score 3 were 20.3, 15.2 ± 0.01, 23.8 ± 0.01, and 18.6 ± 0.01; with score 4 were 0.8, 0.005 ± 0.001, 0.006 ± 0.001, and 0.025 ± 0.003; and with score 5 was 0 for all bed types. Cows on RFM and waterbeds had improved hygiene compared with cows on sand beds. There was no difference in somatic cell count (SCC) by bed type. The percentage of cows in fourth lactation or greater on waterbeds (19.8 ± 1.8) was greater than those on RFM (13.3 ± 1.6) or on sand (13.5 ± 1.8). The percentage culled was lower for cows on waterbeds than on RFM (22.8 ± 1.5 vs. 29.4 ± 1.4). Score 3 tarsal lesions were correlated (r = 0.60) with SCC. The length of the sand bed was correlated with a greater percentage of mature cows. The SCC was correlated with the percentage of cows reported lame on the day of the visit (r = 0.45) and with neck rail height (r = −0.26). On dairies with RFM, severe lesions (r = 0.60), death losses (r = 0.52), and percentage of the herd reported lame on the day of the visit (r = 0.52) were all correlated with the SCC. Dairies with higher percentages of lesions had higher SCC, death losses, lameness, and culling rates. Adding bedding several times per week may reduce the incidence of lesions