24 research outputs found
Mechanical properties of Graphene Nanoribbons
Herein, we investigate the structural, electronic and mechanical properties
of zigzag graphene nanoribbons upon the presence of stress applying Density
Functional Theory within the GGA-PBE approximation. The uniaxial stress is
applied along the periodic direction, allowing a unitary deformation in the
range of +/- 0.02%. The mechanical properties show a linear-response within
that range while the non-linear dependence is found for higher strain. The most
relevant results indicate that Young's modulus is considerable higher than
those determined for graphene and carbon nanotubes. The geometrical
reconstruction of the C-C bonds at the edges hardness the nanostructure.
Electronic structure features are not sensitive to strain in this linear
elastic regime, being an additional promise for the using of carbon
nanostructures in nano-electronic devices in the near future.Comment: 30 pages. J. Phys.: Condens. Matter (accepted
Задача о рюкзаке с выпуклыми монотонными сепарабельными функциями
Рассмотрена модельная задача о рюкзаке. Предложена схема решения задачи о рюкзаке с выпуклыми монотонными сепарабельными функциями
CF(x) thin solid films deposited by high power impulse magnetron sputtering: Synthesis and characterization
Fluorine containing amorphous carbon films (CF(x), 0.16 = 0.26. Nanoindentation reveals hardnesses between similar to 1 GPa and similar to 16 GPa and an elastic recovery of up to 98%. (C) 2011 Elsevier B.V. All rights reserved
Reactive high power impulse magnetron sputtering of CFx thin films in mixed Ar/CF4 and Ar/C4F8 discharges
The reactive high power impulse magnetron sputtering processes of carbon in argon/tetrafluoromethane (CF4) and argon/octafluorocyclobutane (c-C4F8) have been characterized. Amorphous carbon fluoride (CFx) films were synthesized at deposition pressure and substrate temperature of 400 mPa and 110 C, respectively. The CFx film composition was controlled in the range of 0.15 < x < 0.35 by varying the partial pressure of the F-containing gases from 0 mPa to 110 mPa. The reactive plasma was studied employing time averaged positive ion mass spectrometry and the resulting thin films were characterized regarding their composition, chemical bonding and microstructure as well as mechanical properties by elastic recoil detection analysis, X-ray photoelectron spectroscopy, transmission electron microscopy, nanoindentation, and water droplet contact angle measurements, respectively. The experimental results were compared to results obtained by first-principles calculations based on density functional theory. The modeling of the most abundant precursor fragment from the dissociation of CF4 and C4F8 provided their relative stability, abundance, and reactivity, thus permitting to evaluate the role of each precursor during film growth. Positive ion mass spectrometry of both fluorine plasmas shows an abundance of CF+, C+, CF2 +, and CF3 + (in this order) as corroborated by first-principles calculations. Only CF3 + exceeded the Ar+ signal in a CF4 plasma. Two deposition regimes are found depending on the partial pressure of the fluorine-containing reactive gas, where films with fluorine contents below 24 at.% exhibit a graphitic nature, whereas a polymeric structure applies to films with fluorine contents exceeding 27 at.%. Moreover, abundant precursors in the plasma are correlated to the mechanical response of the different CFx thin films. The decreasing hardness with increasing fluorine content can be attributed to the abundance of CF3 + precursor species, weakening the carbon matrix. © 2013 Elsevier B.V. All rights reserved