1,566 research outputs found
Presenting in Virtual Worlds: An Architecture for a 3D Anthropomorphic Presenter
Multiparty-interaction technology is changing entertainment, education, and training. Deployed examples of such technology include embodied agents and robots that act as a museum guide, a news presenter, a teacher, a receptionist, or someone trying to sell you insurance, homes, or tickets. In all these cases, the embodied agent needs to explain and describe. This article describes the design of a 3D virtual presenter that uses different output channels (including speech and animation of posture, pointing, and involuntary movements) to present and explain. The behavior is scripted and synchronized with a 2D display containing associated text and regions (slides, drawings, and paintings) at which the presenter can point. This article is part of a special issue on interactive entertainment
Influence of Solutes on Hydration and Lubricity of Dextran Brushes
The characteristic lubricity and non-fouling behavior of polymer brushes is critically dependent on the solvation of the polymer chains, as well as the chainâchain interactions. Dextran brushes have shown promise as non-toxic aqueous lubricant films, and are similar in composition
to natural lubricating systems, while their comparative simplicity allows for controlled preparation and fine characterization. This project entails measuring the solvation and lubricity of dextran brushes in the presence of additives which modify the inter-chain hydrogen bonding. The thickness
and refractive index of the film were measured during adsorption of the brush layer onto a silica substrate and the subsequent immersion in solutions of potassium sulfate and ?, ?-trehalose. We also studied the lubricity of the system as a function of normal loading using colloidal-probe
AFM. Both solutes are shown to have a minimal effect on the hydration of the brush while significantly reducing the brush lubricity, indicating that inter-chain hydrogen bonding supports the load-bearing capacity of polysaccharide brushes
Balancing adaptivity and customisation : in search of sustainable personalisation in cultural heritage
Personalisation for cultural heritage aims at delivering to visitors the right stories at the right time. Our endeavour to determine which features to use for adaptation starts from acknowledging what forms of personalisation curators value as most meaningful. Working in collaboration with curators we have explored the different features that must be taken into account: some are related to the content (multiple interpretation layers), others to the context of delivery (where and when), but some are idiosyncratic (âmatch my moodâ, âsomething that is relevant to my lifeâ). The findings reveal that a sustainable personalization needs to accurately balance: (i) support to curators in customising stories to different visitors; (ii) algorithms for the system to dynamically model aspects of the visit and instantiate the correct behaviour; and (iii) an active role for visitors to choose the type of experience they would like to have today
The Mechanical Coupling of Fluid-Filled Granular Material Under Shear
The coupled mechanics of fluid-filled granular media controls the physics of many Earth systems, for example saturated soils, fault gouge, and landslide shear zones. It is well established that when the pore fluid pressure rises, the shear resistance of fluid-filled granular systems decreases, and, as a result, catastrophic events such as soil liquefaction, earthquakes, and accelerating landslides may be triggered. Alternatively, when the pore pressure drops, the shear resistance of these geosystems increases. Despite the great importance of the coupled mechanics of grain-fluid systems, the basic physics that controls this coupling is far from understood. Fundamental questions that must be addressed include: what are the processes that control pore fluid pressurization and depressurization in response to deformation of the granular skeleton? and how do variations of pore pressure affect the mechanical strength of the grains skeleton? To answer these questions, a formulation for the pore fluid pressure and flow has been developed from mass and momentum conservation, and is coupled with a granular dynamics algorithm that solves the grain dynamics, to form a fully coupled model. The pore fluid formulation reveals that the evolution of pore pressure obeys viscoelastic rheology in response to pore space variations. Under undrained conditions elastic-like behavior dominates and leads to a linear relationship between pore pressure and overall volumetric strain. Viscous-like behavior dominates under well-drained conditions and leads to a linear relationship between pore pressure and volumetric strain rate. Numerical simulations reveal the possibility of liquefaction under drained and initially over-compacted conditions, which were often believed to be resistant to liquefaction. Under such conditions liquefaction occurs during short compactive phases that punctuate the overall dilative trend. In addition, the previously recognized generation of elevated pore pressure under undrained compactive conditions is observed. Simulations also show that during liquefaction events stress chains are detached, the external load becomes completely supported by the pressurized pore fluid, and shear resistance vanishe
Evaluating the intensity of fire at the Acheulian site of Gesher Benot Ya'aqovâSpatial and thermoluminescence analyses
This manuscript presents an attempt to evaluate the intensity of fire through spatial patterning and thermoluminescence methodology. Previous studies of Layer II-6 Level 2 at the Acheulian site of Gesher Benot Yaâaqov suggested that hominins differentiated their activities across space, including multiple activities around a hearth reconstructed on the basis of the distribution of burned flint artifacts. A transect of ~4 m was extended from the center of the reconstructed hearth of Level 2 to its periphery in order to examine the intensity of fire. Burned and unburned flint microartifacts were sampled along this transect. The results of earlier and current thermoluminescence (TL) analysis demonstrate a general agreement with the macroscopic determination of burning, indicating that the possibility of misinterpretation based on macroscopic observations is negligible. The TL signal from flint microartifacts close to the hearthâs center shows unambiguous signs of strong heating, whereas with increasing distance from the hearth the TL signal can be interpreted as a result of decreasing temperatures and/or shorter durations of exposure to fire in addition to a decreasing number of flints showing fire damage. Our study shows that TL analysis can identify some variation in fire intensity, which allows a more precise classification of burned flint microartifacts with respect to their heating history
Stimulated wave of polarization in spin chains
Stimulated wave of polarization, triggered by a flip of a single spin,
presents a simple model of quantum amplification. Previously, it has been found
that such wave can be excited in a 1D Ising chain with nearest-neighbor
interactions, irradiated by a weak resonant transverse field. Here we explore
models with more realistic Hamiltonians, in particular, with natural
dipole-dipole interactions. Results of simulations for 1D spin chains and rings
with up to nine spins are presented.Comment: 15 pages, 5 figure
A Versatile and Reproducible Multi-Frequency Electrical Impedance Tomography System
A highly versatile Electrical Impedance Tomography (EIT) system, nicknamed the ScouseTom, has been developed. The system allows control over current amplitude, frequency, number of electrodes, injection protocol and data processing. Current is injected using a Keithley 6221 current source, and voltages are recorded with a 24-bit EEG system with minimum bandwidth of 3.2 kHz. Custom PCBs interface with a PC to control the measurement process, electrode addressing and triggering of external stimuli. The performance of the system was characterised using resistor phantoms to represent human scalp recordings, with an SNR of 77.5 dB, stable across a four hour recording and 20 Hz to 20 kHz. In studies of both haeomorrhage using scalp electrodes, and evoked activity using epicortical electrode mats in rats, it was possible to reconstruct images matching established literature at known areas of onset. Data collected using scalp electrode in humans matched known tissue impedance spectra and was stable over frequency. The experimental procedure is software controlled and is readily adaptable to new paradigms. Where possible, commercial or open-source components were used, to minimise the complexity in reproduction. The hardware designs and software for the system have been released under an open source licence, encouraging contributions and allowing for rapid replication
Multiple Quantum NMR Dynamics in Dipolar Ordered Spin Systems
We investigate analytically and numerically the Multiple Quantum (MQ) NMR
dynamics in systems of nuclear spins 1/2 coupled by the dipole-dipole
interactions in the case of the dipolar ordered initial state. We suggest two
different methods of MQ NMR. One of them is based on the measurement of the
dipolar temperature in the quasi-equilibrium state which establishes after the
time of order T2 after the MQ NMR experiment. The other method uses an
additional resonance 45^0 -pulse after the preparation period of the standard
MQ NMR experiment in solids. Many-spin clusters and correlations are created
faster in such experiments than in the usual MQ NMR experiments and can be used
for the investigation of many-spin dynamics of nuclear spins in solids.Comment: 11 pages, 3 figures. accepted for publication in Physical Review
- âŠ