70 research outputs found
Building integrated solar concentrating systems: A review
© 2019 Elsevier Ltd In the building sector, concerns towards the vast energy consumption has promoted the development of renewable energy technologies. In this regards, the solar concentration devices show a promising concept for building applications. However, the solar concentrators for application in buildings have many restrictions, which are different from the traditional solar concentrators. The main objective of this paper is to present a concise review on the building integrated concentrating devices, that have their own characteristics and multiple functions. This paper made a classification based on device's functions, i.e. building integrated concentrated photovoltaic systems (BICPV), building integrated concentrating solar thermal (BICST) and building integrated concentrating solar daylighting (BICSD) and the combination of functions, i.e. BICPV/T, BICPV/D, BICST/D and BICPV/T/D. At the same time, this paper presented an elaborate introduction of the demands, types and applications of the building integrated concentrating devices and prospects/ directions/ policies about these technologies around the world. The review would provide important information for the actual engineering of building integrated concentrating devices
Conductance of graphene nanoribbon junctions and the tight binding model
Planar carbon-based electronic devices, including metal/semiconductor junctions, transistors and interconnects, can now be formed from patterned sheets of graphene. Most simulations of charge transport within graphene-based electronic devices assume an energy band structure based on a nearest-neighbour tight binding analysis. In this paper, the energy band structure and conductance of graphene nanoribbons and metal/semiconductor junctions are obtained using a third nearest-neighbour tight binding analysis in conjunction with an efficient nonequilibrium Green’s function formalism. We find significant differences in both the energy band structure and conductance obtained with the two approximations
Lethal and sublethal effects of dinotefuran and thiamethoxam on the population growth parameters of the green lacewing, Chrysoperla carnea (Neu.: Chrysopidae), under laboratory conditions
The green lacewing, Chrysoperla carnea (Stephens), is a common natural enemy of various agricultural pestsand widely used as a biocontrol agent in integrated pest management (IPM) programs. The lethal and sublethal effects of the insecticides dinotefuran and thiamethoxam on the first instar larvae of C. carnea was assessed in the laboratory conditions at 25 ± 1°C, 60 ± 5% RH and a photoperiod of 16: 8 (L: D). The LC50 values for dinotefuran and thiamethoxam were 19.382 and 9.880 mg ai/l, respectively, that showed the high toxicity of thiamethoxam on the first instar larvae of C. carnea. To assess the sublethal effects, the first instar larvae were treated with the LC30 for dinotefuran and thiamethoxam at 3.532 and 1.692 mg ai/l, respectively. The estimated rm values in the control, dinotefuran and thiamethoxam were 0.185, 0.186 and 0.143 day-1, respectively. Finite rate of increase (λ) in the control, dinotefuran and thiamethoxam were 1.204, 1.204 and 1.154 day-1. Generation time and doubling time values in the control, dinotefuran and thiamethoxam were 30.77, 30.46 and 35.14 as well as 3.73, 3.72 and 4.82 days, respectively. The gross and net reproductive rates in the control, dinotefuran and thiamethoxam were 459.89, 439.08 and 309.42, and also 298.01, 278.45 and 155.03 (female/female/generation), respectively. Dinotefuran caused no significant adverse effects on the population growth parameters of C. carnea. If similar results are obtained for dinotefuran in the field, it might be an insecticide with low toxicity to C. carnea by using the reduced doses of the insecticide in IPM context. Studies under the laboratory conditions can help us to select some insecticides for additional studies under more natural conditions and for application of suitable insecticides along with natural enemies in pest management
Fabrication of multifunctional microfibrous and nanofibrous cellulose carriers and comparison of cell adhesion and spreading potential on them
Fibrous biomaterials have received much attention in tissue engineering and regenerative medicine due to their morphology, resembling extracellular matrix. In comparison to synthetic fibers, cellulose based fibers have interesting properties for cellular applications such as biodegradability, biocompatibility, simple preparation and their potential for chemical modification. Among cellulose derivatives, carboxymethyl cellulose and quaternized cellulose are the most important and valuable cellulose ethers which have anionic and cationic surface charge. In this research, we report the fabrication of multifunctional cellulose microfibrous and nanofibrous scaffolds and the comparison of adhesion and spreading potential of human fibroblast cell on them. The fabricated fibrous scaffolds were characterized by several instrumental techniques. The results showed that multifunctional cellulose nanofibers and microfiber had 8.6 and 8.2 mV surface potential, 7.1 and 6.8 MPa tensile strength, 560 and 510 MPa Young modules, 610 and 595 water uptake and 41o and 44o contact angle, respectively. The MTT assay showed that proliferation of fibroblast cells was enhanced in nanofibrous, compared to microfibrous mat. The SEM analysis of fixed cells on scaffolds showed that cells spreading on nanofibrous samples became more noticeable than microfibrous ones. © 2020 by the authors
Kinetic investigation on extrinsic spin Hall effect induced by skew scattering
The kinetics of the extrinsic spin Hall conductivity induced by the skew
scattering is performed from the fully microscopic kinetic spin Bloch equation
approach in GaAs symmetric quantum well. In the steady state, the
extrinsic spin Hall current/conductivity vanishes for the linear-
dependent spin-orbit coupling and is very small for the cubic-
dependent spin-orbit coupling. The spin precession induced by the
Dresselhaus/Rashba spin-orbit coupling plays a very important role in the
vanishment of the extrinsic spin Hall conductivity in the steady state. An
in-plane spin polarization is induced by the skew scattering, with the help of
the spin-orbit coupling. This spin polarization is very different from the
current-induced spin polarization.Comment: 5 pages, 2 figures, to be published in JPC
How close can one approach the Dirac point in graphene experimentally?
The above question is frequently asked by theorists who are interested in
graphene as a model system, especially in context of relativistic quantum
physics. We offer an experimental answer by describing electron transport in
suspended devices with carrier mobilities of several 10^6 cm^2V^-1s^-1 and with
the onset of Landau quantization occurring in fields below 5 mT. The observed
charge inhomogeneity is as low as \approx10^8 cm^-2, allowing a neutral state
with a few charge carriers per entire micron-scale device. Above liquid helium
temperatures, the electronic properties of such devices are intrinsic, being
governed by thermal excitations only. This yields that the Dirac point can be
approached within 1 meV, a limit currently set by the remaining charge
inhomogeneity. No sign of an insulating state is observed down to 1 K, which
establishes the upper limit on a possible bandgap
Interplay between edge states and simple bulk defects in graphene nanoribbons
We study the interplay between the edge states and a single impurity in a
zigzag graphene nanoribbon. We use tight-binding exact diagonalization
techniques, as well as density functional theory calculations to obtain the
eigenvalue spectrum, the eigenfunctions, as well the dependence of the local
density of states (LDOS) on energy and position. We note that roughly half of
the unperturbed eigenstates in the spectrum of the finite-size ribbon hybridize
with the impurity state, and the corresponding eigenvalues are shifted with
respect to their unperturbed values. The maximum shift and hybridization occur
for a state whose energy is inverse proportional to the impurity potential;
this energy is that of the impurity peak in the DOS spectrum. We find that the
interference between the impurity and the edge gives rise to peculiar
modifications of the LDOS of the nanoribbon, in particular to oscillations of
the edge LDOS. These effects depend on the size of the system, and decay with
the distance between the edge and the impurity.Comment: 10 pages, 15 figures, revtex
Photocurrent imaging and efficient photon detection in a graphene transistor
We measure the channel potential of a graphene transistor using a scanning
photocurrent imaging technique. We show that at a certain gate bias, the impact
of the metal on the channel potential profile extends into the channel for more
than 1/3 of the total channel length from both source and drain sides, hence
most of the channel is affected by the metal. The potential barrier between the
metal controlled graphene and bulk graphene channel is also measured at various
gate biases. As the gate bias exceeds the Dirac point voltage, VDirac, the
original p-type graphene channel turns into a p-n-p channel. When light is
focused on the p-n junctions, an impressive external responsivity of 0.001 A/W
is achieved, given that only a single layer of atoms are involved in photon
detection.Comment: 24 pages, 4 figure
Automated Planning of Concrete Joint Layouts with 4D-BIM
Concrete pouring represents a major critical path activity that is often affected by design limitations, structural considerations and on-site operational constraints. As such, meticulous planning is required to ensure that both the aesthetic and structural integrity of joints between cast in-situ components is achieved. Failure to adequately plan concrete pouring could lead to structural defects, construction rework or structural instability, all having major financial implications. Given the inherent complexity of large-scale construction projects, the ‘manual planning’ of concrete pouring is a challenging task and prone to human errors. Against this backdrop, this study developed 4D Building Information Management (BIM) approach to facilitate automated concrete joint positioning solution (as a proof of concept) for design professionals and contractors. The study first developed structural model in Revit, then extracted spatial information regarding all construction joints and linked them to dynamic Microsoft (MS) Excel and Matlab spreadsheets using integration facilitated by Dynamo software. Midspan points of each beam as well as floor perimeter information were gathered via codes developed in MS Excel macros. Based on the Excel outputs, Matlab programming was used to determine best concreating starting points and directions, and daily allowed concrete volume, considering limitations due to cold joints. These information were then pushed back to Revit via Dynamo in order to develop daily concrete scheduling. The developed automated programme framework offers a cost-effective and accurate methodology to address the limitations and inefficiencies of traditional methods of designing construction joints and planning pours. This framework extends the body of knowledge by introducing innovative solutions to integrate structural design considerations, constructional procedures and operational aspects for mitigating human error, and providing a novel, yet technically sound, basis for further application of BIM in structural engineering
- …