270 research outputs found
From vertex detectors to inner trackers with CMOS pixel sensors
The use of CMOS Pixel Sensors (CPS) for high resolution and low material
vertex detectors has been validated with the 2014 and 2015 physics runs of the
STAR-PXL detector at RHIC/BNL. This opens the door to the use of CPS for inner
tracking devices, with 10-100 times larger sensitive area, which require
therefore a sensor design privileging power saving, response uniformity and
robustness. The 350 nm CMOS technology used for the STAR-PXL sensors was
considered as too poorly suited to upcoming applications like the upgraded
ALICE Inner Tracking System (ITS), which requires sensors with one order of
magnitude improvement on readout speed and improved radiation tolerance. This
triggered the exploration of a deeper sub-micron CMOS technology, Tower-Jazz
180 nm, for the design of a CPS well adapted for the new ALICE-ITS running
conditions. This paper reports the R&D results for the conception of a CPS well
adapted for the ALICE-ITS.Comment: 4 pages, 4 figures, VCI 2016 conference proceeding
Performance of the EUDET-type beam telescopes
Test beam measurements at the test beam facilities of DESY have been
conducted to characterise the performance of the EUDET-type beam telescopes
originally developed within the EUDET project. The beam telescopes are equipped
with six sensor planes using MIMOSA26 monolithic active pixel devices. A
programmable Trigger Logic Unit provides trigger logic and time stamp
information on particle passage. Both data acquisition framework and offline
reconstruction software packages are available. User devices are easily
integrable into the data acquisition framework via predefined interfaces.
The biased residual distribution is studied as a function of the beam energy,
plane spacing and sensor threshold. Its standard deviation at the two centre
pixel planes using all six planes for tracking in a 6\,GeV
electron/positron-beam is measured to be
(2.88\,\pm\,0.08)\,\upmu\meter.Iterative track fits using the formalism of
General Broken Lines are performed to estimate the intrinsic resolution of the
individual pixel planes. The mean intrinsic resolution over the six sensors
used is found to be (3.24\,\pm\,0.09)\,\upmu\meter.With a 5\,GeV
electron/positron beam, the track resolution halfway between the two inner
pixel planes using an equidistant plane spacing of 20\,mm is estimated to
(1.83\,\pm\,0.03)\,\upmu\meter assuming the measured intrinsic resolution.
Towards lower beam energies the track resolution deteriorates due to increasing
multiple scattering. Threshold studies show an optimal working point of the
MIMOSA26 sensors at a sensor threshold of between five and six times their RMS
noise. Measurements at different plane spacings are used to calibrate the
amount of multiple scattering in the material traversed and allow for
corrections to the predicted angular scattering for electron beams
Development of ultra-light pixelated ladders for an ILC vertex detector
The development of ultra-light pixelated ladders is motivated by the
requirements of the ILD vertex detector at ILC. This paper summarizes three
projects related to system integration. The PLUME project tackles the issue of
assembling double-sided ladders. The SERWIETE project deals with a more
innovative concept and consists in making single-sided unsupported ladders
embedded in an extra thin plastic enveloppe. AIDA, the last project, aims at
building a framework reproducing the experimental running conditions where sets
of ladders could be tested
Radiation Tolerance of CMOS Monolithic Active Pixel Sensors with Self-Biased Pixels
CMOS Monolithic Active Pixel Sensors (MAPS) are proposed as a technology for
various vertex detectors in nuclear and particle physics. We discuss the
mechanisms of ionizing radiation damage on MAPS hosting the the dead time free,
so-called self bias pixel. Moreover, we discuss radiation hardened sensor
designs which allow operating detectors after exposing them to irradiation
doses above 1 Mra
Monitoring SARS-CoV-2 Circulation and Diversity through Community Wastewater Sequencing, the Netherlands and Belgium
Severe acute respiratory syndrome coronavirus 2 (SARSCoV- 2) has rapidly become a major global health problem, and public health surveillance is crucial to monitor and prevent virus spread. Wastewater-based epidemiology has been proposed as an addition to disease-based surveillance because virus is shed in the feces of â40% of infected persons. We used next-generation sequencing of sewage samples to evaluate the diversity of SARS-CoV-2 at the community level in the Netherlands and Belgium. Phylogenetic analysis revealed the presence of the most prevalent clades (19A, 20A, and 20B) and clustering of sewage samples with clinical samples from the same region. We distinguished multiple clades within a single sewage sample by using low-frequency variant analysis. In addition, several novel mutations in the SARS-CoV-2 genome were detected. Our results illustrate how wastewater can be used to investigate the diversity of SARS-CoV-2 viruses circulating in a community and identify new outbreaks
CMOS pixel sensor development: a fast read-out architecture with integrated zero suppression
International audienceCMOS Monolithic Active Pixel Sensors (MAPS) have demonstrated their strong potential for tracking devices, particularly for flavour tagging. They are foreseen to equip several vertex detectors and beam telescopes. Most applications require high read-out speed, which imposes sensors to feature digital output with integrated zero suppression. The most recent development of MAPS at IPHC and IRFU addressing this issue will be reviewed. The design architecture, combining pixel array, column-level discriminators and zero suppression circuits, will be presented. Each pixel features a preamplifier and a correlated double sampling (CDS) micro-circuit reducing the temporal and fixed pattern noises. The sensor is fully programmable and can be monitored. It will equip experimental apparatus starting data taking in 2009/2010
A vertex detector for the International Linear Collider based on CMOS sensors
The physics programme at the International Linear Collider (ILC) calls for a vertex detector (VD) providing unprecedented flavour tagging performances, especially for c-quarks and Ï leptons. This requirement makes a very granular, thin and multi-layer VD installed very close to the interaction region mandatory. Additional constraints, mainly on read-out speed and radiation tolerance, originate from the beam background, which governs the occupancy and the radiation level the detector should be able to cope with. CMOS sensors are being developed to fulfil these requirements. This report addresses the ILC requirements (highly related to beamstrahlung), the main advantages and features of CMOS sensors, the demonstrated performances and the specific aspects of a VD based on this technology. The status of the main R&D directions (radiation tolerance, thinning procedure and read-out speed) are also presented
Infrastructure for Detector Research and Development towards the International Linear Collider
The EUDET-project was launched to create an infrastructure for developing and
testing new and advanced detector technologies to be used at a future linear
collider. The aim was to make possible experimentation and analysis of data for
institutes, which otherwise could not be realized due to lack of resources. The
infrastructure comprised an analysis and software network, and instrumentation
infrastructures for tracking detectors as well as for calorimetry.Comment: 54 pages, 48 picture
- âŠ