The effect of interfacial pH on the surface atomic elemental distribution and on the catalytic reactivity of shape-selected bimetallic nanoparticles towards oxygen reduction

The effect of interfacial pH during the surface cleaning of shape-selected PtNi nanoparticles was investigated. High-angle annular dark field (HAADF) scanning transmission electron microscopy (STEM) and energy-dispersive X-ray (EDX) elemental mapping techniques were used to analyze the morphology and composition of the particles at the nanoscale. The particles show similar atomic compositions for both treated samples but different elemental distribution on the surface of the nanooctahedra. X-ray photoelectron spectroscopy (XPS) analysis confirmed different surface compositions and the presence of different oxidation states species at the outer part of the nanoparticles. In addition, we compare characteristic voltammetric profiles of these nanocatalysts when immersed in three different aqueous supporting electrolytes (H2SO4, HClO4 and NaOH). The behavior of the bimetallic nanoparticles towards adsorbed CO oxidation has been analyzed and compared with that observed after surface disordering of the same catalysts. The electrocatalytic activity of these nanoparticles has been also tested for the electroreduction of oxygen showing high specific and mass activity and better catalytic performance than pure Pt shaped nanoparticles. The different treatments applied to the surface of the nanocatalysts have led to remarkably different catalytic responses, pointing out the outstanding importance of the control of the surface of the alloyed shape-selected nanoparticles after their synthesis and before their use as electrocatalysts.This work was carried out under financial support of MICINN (Project no. CTQ2013-44083-P). M.H. and M.G. thank the Deutsche Forschungsgemeinschaft (DFG) for financial support within the grant HE7192/1-1. P.S. acknowledges partial financial support by the German Research Foundation (DFG) through Grants STR 596/5-1 and STR 596/4-1

Elemental Anisotropic Growth and Atomic-Scale Structure of Shape-Controlled Octahedral Pt–Ni–Co Alloy Nanocatalysts

Multimetallic shape-controlled nanoparticles offer great opportunities to tune the activity, selectivity, and stability of electrocatalytic surface reactions. However, in many cases, our synthetic control over particle size, composition, and shape is limited requiring trial and error. Deeper atomic-scale insight in the particle formation process would enable more rational syntheses. Here we exemplify this using a family of trimetallic PtNiCo nanooctahedra obtained via a low-temperature, surfactant-free solvothermal synthesis. We analyze the competition between Ni and Co precursors under coreduction “one-step” conditions when the Ni reduction rates prevailed. To tune the Co reduction rate and final content, we develop a “two-step” route and track the evolution of the composition and morphology of the particles at the atomic scale. To achieve this, scanning transmission electron microscopy and energy dispersive X-ray elemental mapping techniques are used. We provide evidence of a heterogeneous element distribution caused by element-specific anisotropic growth and create octahedral nanoparticles with tailored atomic composition like Pt1.5M, PtM, and PtM1.5 (M = Ni + Co). These trimetallic electrocatalysts have been tested toward the oxygen reduction reaction (ORR), showing a greatly enhanced mass activity related to commercial Pt/C and less activity loss than binary PtNi and PtCo after 4000 potential cycles.P.S. acknowledges financial support by the German Research Foundation (DFG) through grant STR 596/5-1 (“Nanoscale Pt Alloy electrocatalysts with well-defined shapes”). Partial funding by the German Ministry of Education and Research (BMBF) grant “LOPLAKAT” is gratefully acknowledged. Also, this work was financially supported by the MICINN (Spain) (project 2013-44083-P). R.M.A.A. thanks the funding received from MICINN (EEBB-I-14-08240) to carry out a predoctoral stay in a foreign R&D center. M.H. thanks the Deutsche Forschungsgemeinschaft (DFG) for financial support within the grant HE 7192/1-1

Nanostructure of wet-chemically prepared, polymer-stabilized silver–gold nanoalloys (6 nm) over the entire composition range

Bimetallic silver–gold nanoparticles were prepared by co-reduction using citrate and tannic acid in aqueous solution and colloidally stabilized with poly(N-vinylpyrrolidone) (PVP). The full composition range of silver : gold from 0 : 100 to 100 : 0 (n : n) was prepared with steps of 10 mol%. The nanoparticles were spherical, monodispersed, and had a diameter of [similar]6 nm, except for Ag : Au 90 : 10 nanoparticles and pure Ag nanoparticles which were slightly larger. The size of the nanoalloys was determined by differential centrifugal sedimentation (DCS) and transmission electron microscopy (TEM). By means of X-ray powder diffraction (XRD) together with Rietveld refinement, precise lattice parameters, crystallite size and microstrain were determined. Scanning transmission electron microscopy (STEM) combined with energy-dispersive X-ray spectroscopy (EDX) and electron energy loss spectroscopy (EELS) showed that the particles consisted of a gold-rich core and a silver-rich shell. XRD and DCS indicated that the nanoparticles were not twinned, except for pure Ag and Ag : Au 90 : 10, although different domains were visible in the TEM. A remarkable negative deviation from Vegard's linear rule of alloy mixtures was observed (isotropic contraction of the cubic unit cell with a minimum at a 50 : 50 composition). This effect was also found for Ag:Au bulk alloys, but it was much more pronounced for the nanoalloys. Notably, it was much less pronounced for pure silver and gold nanoparticles. The microstrain was increased along with the contraction of the unit cell with a broad maximum at a 50 : 50 composition. The synthesis is based on aqueous solvents and can be easily scaled up to a yield of several mg of a well dispersed nanoalloy with application potential due to its tuneable antibacterial action (silver) and its optical properties for bioimaging

N-Cadherin modified lipid bilayers promote neural network formation and circuitry

Neural adhesion, maturation, and the correct wiring of the brain to establish each neuron's intended connectivity are controlled by complex interactions of bioactive molecules such as ligands, growth factors, or enzymes. The correct pairing of adjacent neurons is thought to be highly regulated by ligand-mediated cell–cell adhesion proteins, which are known to induce signaling activities. We developed a new platform consisting of supported lipid bilayers incorporated with Fc-chimera synaptic proteins like ephrinA5 or N-cadherin. We extensively characterized their function employing a quartz crystal microbalance with dissipation (QCM-D), calcium imaging, and immunofluorescence analysis. Our biomimetic platform has been shown to promote neural cell adhesion and to improve neural maturation at day in vitro 7 (DIV7) as indicated by an elevated expression of synaptophysin

Rh-Doped Pt–Ni Octahedral Nanoparticles: Understanding the Correlation between Elemental Distribution, Oxygen Reduction Reaction, and Shape Stability

Thanks to their remarkably high activity toward oxygen reduction reaction (ORR), platinum-based octahedrally shaped nanoparticles have attracted ever increasing attention in last years. Although high activities for ORR catalysts have been attained, the practical use is still limited by their long-term stability. In this work, we present Rh-doped Pt–Ni octahedral nanoparticles with high activities up to 1.14 A mgPt–1 combined with improved performance and shape stability compared to previous bimetallic Pt–Ni octahedral particles. The synthesis, the electrocatalytic performance of the particles toward ORR, and atomic degradation mechanisms are investigated with a major focus on a deeper understanding of strategies to stabilize morphological particle shape and consequently their performance. Rh surface-doped octahedral Pt–Ni particles were prepared at various Rh levels. At and above about 3 atom %, the nanoparticles maintained their octahedral shape even past 30 000 potential cycles, while undoped bimetallic reference nanoparticles show a complete loss in octahedral shape already after 8000 cycles in the same potential window. Detailed atomic insight in these observations is obtained from aberration-corrected scanning transmission electron microscopy (STEM) and energy dispersive X-ray (EDX) analysis. Our analysis shows that it is the migration of Pt surface atoms and not, as commonly thought, the dissolution of Ni that constitutes the primary origin of the octahedral shape loss for Pt–Ni nanoparticles. Using small amounts of Rh we were able to suppress the migration rate of platinum atoms and consequently suppress the octahedral shape loss of Pt–Ni nanoparticles

Concave curvature facets benefit oxygen electroreduction catalysis on octahedral shaped PtNi nanocatalysts

Studies that demonstrated enhanced electrocatalytic oxygen reduction activities of octahedral PtNi nanocatalysts have routinely motivated and explained their data by the structure-sensitivity of PtNi alloy surfaces in general, more specifically by the favourable performance of the annealed Pt3Ni(111) single crystal surface with a monoatomic Pt skin, in particular. In this contribution, we challenge this view and show that imperfect Ni-enriched {111} nanofacets with concave Pt curvature catalytically outperform flat, well-alloyed, locally ordered {111} and {100} nanofacets in cuboctahedral nanoparticles. To achieve this, we investigate the geometric, compositional, and morphological structure on the ensemble and on the individual particle level of PtNi alloy nano-octahedra. In particular, we track the correlations of these parameters after thermal annealing and link them to their catalytic activity. The level of local compositional and structural disorder appears to be a reliable descriptor and predictor for ORR activity – at least within a family of catalysts. After annealing up to 300 °C, concave Pt {111} facets, with partially flat Ni facets, remained most prevalent, resulting in nanoparticles with pronounced elemental anisotropy. At higher annealing temperature, concave Pt morphologies gave way to cuboctahedra with healed flat {111} and {100} alloy facets. The imperfect concave nano-octahedral catalysts with enhanced local disorder invariably outperformed more ordered particles, yet lagged behind in morphological stability. Faceted PtNi nano-cuboctahedra emerging at 400 °C ultimately offered the most reasonable balance between moderately high activity and good morphological stability. This is why we propose these cuboctahedral shaped Pt alloy nanoparticles as promising PEM cathode fuel cell catalyst of choice. While the present results do not invalidate the exceptional oxygen reduction activity of perfect Pt3Ni(111) “skin” single crystal surfaces, they shed new light on the decade old puzzle about structure–activity relationships of PtNi octahedral nanocrystals

The most important psychological and psychosocial needs of Polish multiple sclerosis patients and their significant others

Andrzej Potemkowski,1 Waldemar Brola,2,3 Anna Ratajczak,4 Marcin Ratajczak,5 Mariusz Kowalewski,6 Małgorzata Lewita,6 Katarzyna Kapica-Topczewska,7 Joanna Tarasiuk,7 Adam Stępień,8 Katarzyna Gocyła-Dudar,8 Jacek Zaborski,9 Halina Bartosik-Psujek10 1Department of Clinical Psychology and Psychoprophylaxis, University of Szczecin, 2Department of Neurology, Specialist Hospital, Końskie, 3The Faculty of Medicine and Health Science, Institute of Physiotherapy, Jan Kochanowski University, Kielce, 4Pomeranian Medical University, Szczecin, 5Clinical Trial Center for MS-Patients, Szczecin, 6John Paul II Multiple Sclerosis Rehabilitation Center, Borne Sulinowo, 7Department of Neurology, Medical University of Białystok, Białystok, 8Department of Neurology, Military Institute of Medicine, Warsaw, 9Department of Neurology, Specialist Hospital in Międzylesie, Warsaw, 10Medical Faculty, University of Rzeszów, Rzeszów, Poland Background: People with multiple sclerosis (MS) and their relatives often have multiple, complex needs which require support from a wide range of services. The aim of the study, the first of its kind in Poland, was to identify the most important needs of patients with MS and their significant others (SO). Methods: A questionnaire developed from focus groups consisting of 20 needs-related statements was administered in seven MS centers to 573 MS patients and 220 SO. The mean age of the patients was 42.61 years old; the mean MS duration was 9.43 years. The respondents were asked to rate the needs statements according to their importance on an 11-point scale. The questionnaire was similar for the MS patients and their SO. Results: The most important needs in the patient group were: to feel needed and efficient in life; to have easy access to professional rehabilitation; and to be sure that doctors are interested in my condition. The three most important needs in the SO group were: to know that relatives/friends feel needed and efficient in life; to have good living conditions; and to be sure that doctors are interested in my relative’s/friend’s condition. Correlation analysis revealed that in the patients group, there was a positive correlation between patient’s age and the importance of factors such as the need for support and interest in their disease from the family doctor (P<0.004), receiving educational materials from an MS clinic (P<0.011), interest from the clinic in life issues of the patient (P<0.001), and the need for access to self-rehabilitation (P<0.003); while the need to continue working part-time was inversely correlated with age (P<0.009). Conclusion: The needs of the MS patients and SO were similar. The data validate the importance of interdisciplinary care for the MS population. Keywords: multiple sclerosis, unmet needs, needs assessment, Polan

Controlling Near-Surface Ni Composition in Octahedral PtNi(Mo) Nanoparticles by Mo Doping for a Highly Active Oxygen Reduction Reaction Catalyst

We report and study the translation of exceptionally high catalytic oxygen electroreduction activities of molybdenum-doped octahedrally shaped PtNi(Mo) nanoparticles from conventional thin-film rotating disk electrode screenings (3.43 ± 0.35 A mgPt–1 at 0.9 VRHE) to membrane electrode assembly (MEA)-based single fuel cell tests with sustained Pt mass activities of 0.45 A mgPt–1 at 0.9 Vcell, one of the highest ever reported performances for advanced shaped Pt alloys in real devices. Scanning transmission electron microscopy with energy dispersive X-ray analysis (STEM-EDX) reveals that Mo preferentially occupies the Pt-rich edges and vertices of the element-anisotropic octahedral PtNi particles. Furthermore, by combining in situ wide-angle X-ray spectroscopy, X-ray fluorescence, and STEM-EDX elemental mapping with electrochemical measurements, we finally succeeded to realize high Ni retention in activated PtNiMo nanoparticles even after prolonged potential-cycling stability tests. Stability losses at the anodic potential limits were mainly attributed to the loss of the octahedral particle shape. Extending the anodic potential limits of the tests to the Pt oxidation region induced detectable Ni losses and structural changes. Our study shows on an atomic level how Mo adatoms on the surface impact the Ni surface composition, which, in turn, gives rise to the exceptionally high experimental catalytic ORR reactivity and calls for strategies on how to preserve this particular surface composition to arrive at performance stabilities comparable with state-of-the-art spherical dealloyed Pt core–shell catalysts