Use of an object-based system with reasoning capabilities to integrate relational databases

The integration of heterogeneous and autonomous information sources is a requirement for the new type of cooperative information systems. In this paper we show the advantages of using a terminological system for integrating pre-existing relational databases. From the resulting integrated schema point of view, using · a terminological system allows for the definition of semantically richer integrated schema. From the integrated schema generation process point of view, the use of a terminological system permits the definition of a more consistent, broad and automatic process. Last, from the query processing point of view, terminological systems provide interesting features for incorporating semantic and caching query optimization techniques. The advantages are presented in detail for each main step of the integration process: translation, integration and query processing

Experimental Research and Finite Element Modeling of 3-D Semi-Rigid Composite Joints under Proportional Loads

The behaviour of 2-D composite semi-rigid joints has been researched since the seventies, including experimental work, numerical models, analytical models and practical methods of analysis. However, one of the areas where research is still needed is in the three-dimensional behaviour of semi-rigid composite joints, that is, columns with beams attached to both axes (major and minor axis). This paper describes the details and the results of an experimental program consisting in a test of a 3D composite semi-rigid joint. The design of major axis connection is made with a bolted flush end plate connection while that of the minor axis is done by means of an additional plate welded to the column flanges, rather than attach it to the column web. The specimen is subjected to proportional loads, and further research will be done with non-proportional loads. A finite element (FE) model is developed and validated using the experimental results. The FE model will be used to perform a parametric study for three-dimensional semi-rigid composite joints subjected to proportional and non-proportional loads in a future research

Hall-effect and resistivity measurements in CdTe and ZnTe at high pressure: Electronic structure of impurities in the zincblende phase and the semi-metallic or metallic character of the high-pressure phases

We carried out high-pressure resistivity and Hall-effect measurements in single crystals of CdTe and ZnTe up to 12 GPa. Slight changes of transport parameters in the zincblende phase of CdTe are consitent with the shallow character of donor impurities. Drastic changes in all the transport parameters of CdTe were found around 4 GPa, i.e. close to the onset of the cinnabar to rock-salt transition. In particular, the carrier concentration increases by more than five orders of magnitude. Additionally, an abrupt decrease of the resistivity was detected around 10 GPa. These results are discussed in comparison with optical, thermoelectric, and x-ray diffraction experiments. The metallic character of the Cmcm phase of CdTe is confirmed and a semi-metallic character is determined for the rock-salt phase. In zincblende ZnTe, the increase of the hole concentration by more than two orders of magnitude is proposed to be due to a deep-to-shallow transformation of the acceptor levels. Between 9 and 11 GPa, transport parameters are consistent with the semiconducting character of cinnabar ZnTe. A two orders of magnitude decrease of the resistivity and a carrier-type inversion occurs at 11 GPa, in agreement with the onset of the transition to the Cmcm phase of ZnTe. A metallic character for this phase is deduced.Comment: 20 pages, 4 figure

Empleo de materiales secundarios como materia prima de nuevos tipos de cementos

The present paper is a comparative study of some characteristics of new belite cements obtained from two kind of wastes, which were used as secondary raw materials: fly ash (FA), of low CaO content, from coal combustion, and ash from incineration of municipal solid waste (MSWIA). Cements were synthesised in a range of temperature between 700°C and 900°C from MSWIA and FA, which were previously activated by hydrothermal treatment at 200°C The evolution of cemented phases with the heating temperature was followed by X-ray diffraction (XRD). The results were compared with those obtained from heating the starting FA and MSWIA without the previous hydrothermal treatment. The degree of hydration was quantitatively evaluated by the combined water content, determined from thermogravimetric analyses, during a period of 28 days or 200 days from mixing depending of hydration kinetics of each cement.Este trabajo es un estudio comparativo de algunas de las características de nuevos cementos belíticos, obtenidos a partir de dos tipos de residuos, como materia prima secundaria: cenizas volantes (CV) de bajo contenido en cal, procedentes de la combustión del carbón y cenizas procedentes de la incineración de residuos sólidos urbanos (CIRSU). Los cementos fueron sintetizados en un rango de temperaturas comprendido entre 700°C y 900°C después de un tratamiento hidrotermal de la CV y CIRSU a 200°C La evolución de las fases cementicias, con la temperatura de calentamiento, fue estudiada por difracción de rayos X (DRX). Los resultados fueron comparados con aquellos obtenidos, directamente, por calentamiento de los residuos, sin un tratamiento hidrotermal previo de los mismos. El grado de hidratación fue cuantitativamente evaluado, por medio del análisis termogravimétrico, a partir del agua combinada de los cementos hidratados durante un período de 28 días o 200 días, dependiendo de la cinética de hidratación de cada cemento

Bioaccumulation of inorganic elements in dreissena polymorpha from the Ebro river, Spain: could zebra mussels be used as a bioindicator of the impact of human activities?

Dreissena polymorpha is among the top 100 most harmful invasive species in aquatic habitats. European Directive 2013/39/UE establishes Environmental Quality Standards for biota because it has been demonstrated that pollutants bioaccumulate in aquatic organisms. This study evaluated bioaccumulation of inorganic elements in the soft tissues of D. polymorpha in order to assess the usefulness of zebra mussels as a bioindicator of contaminant presence in super fi cial waters. Concentrations of 66 elements were measured in order to evaluate their relation- ship with nearby anthropogenic activity and to the values recommended by Environmental Quality Standards for biota. Bivalves were col- lected from four sample points along the Ebro River Basin (Spain), where diverse human activities are carried out. Zebra mussels accumulate toxins in soft tissue during their life cycle, including Al, Cr, Fe, Hg, Pb, Th, Cd and U. The highest levels of accumulation corresponded to elements associated with human activity in the area, showing the impact of anthropogenic actions on biota. D. polymorpha not only supplies information about current water quality but also acts as a witness of past water quality by bioconcentrating toxic elements present in the environment and providing relevant results about historical water contamination. In conclusion, D. polymorpha is a harmful and dangerous invasive species, but its pervasiveness means that it can be used as a bioindicator to assess current and past presence of elements in water

Mass transfer kinetics of CO2 and eugenol in the supercritical impregnation of polyamide fibers: Experimental data and modeling

In this work, mass transfer kinetics of CO2 and eugenol into polyamide 6 (PA6) fibers under supercritical conditions were investigated in the context of the development of a functional dental floss for dental care applications using scCO2-assisted impregnation. The sorption kinetics was evaluated at different temperature (40 and 60 °C) and pressure conditions (10 and 12 MPa), measuring the total amount of CO2 and eugenol incorporated in PA6 fibers after certain time intervals (from 30 min to 4 h). Equilibrium sorption was determined for all operation conditions, obtaining the highest values at low CO2 density. Diffusion coefficients of CO2 and eugenol under different process conditions were estimated fitting the experimental data with analytical solutions of the second Fick's law. In addition, thermal behavior of eugenol-loaded PA6 fibers impregnated at different time intervals was evaluated by differential scanning calorimetry (DSC), observing only small changes in the polymer crystallinity during the high-pressure process.Fil: Mosquera, José E.. Universidad Nacional de Córdoba. Instituto de Investigación y Desarrollo en Ingeniería de Procesos y Química Aplicada. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Córdoba. Instituto de Investigación y Desarrollo en Ingeniería de Procesos y Química Aplicada; Argentina. Universidad Nacional de Córdoba. Facultad de Ciencias Exactas Físicas y Naturales. Instituto de Ciencias y Tecnología de los Alimentos; ArgentinaFil: Goñi, Maria Laura. Universidad Nacional de Córdoba. Instituto de Investigación y Desarrollo en Ingeniería de Procesos y Química Aplicada. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Córdoba. Instituto de Investigación y Desarrollo en Ingeniería de Procesos y Química Aplicada; Argentina. Universidad Nacional de Córdoba. Facultad de Ciencias Exactas Físicas y Naturales. Instituto de Ciencias y Tecnología de los Alimentos; ArgentinaFil: Martini, Raquel Evangelina. Universidad Nacional de Córdoba. Instituto de Investigación y Desarrollo en Ingeniería de Procesos y Química Aplicada. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Córdoba. Instituto de Investigación y Desarrollo en Ingeniería de Procesos y Química Aplicada; Argentina. Universidad Nacional de Córdoba. Facultad de Ciencias Exactas Físicas y Naturales. Instituto de Ciencias y Tecnología de los Alimentos; ArgentinaFil: Gañan, Nicolas Alberto. Universidad Nacional de Córdoba. Instituto de Investigación y Desarrollo en Ingeniería de Procesos y Química Aplicada. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Córdoba. Instituto de Investigación y Desarrollo en Ingeniería de Procesos y Química Aplicada; Argentina. Universidad Nacional de Córdoba. Facultad de Ciencias Exactas Físicas y Naturales. Instituto de Ciencias y Tecnología de los Alimentos; Argentin

Far-infrared absorption in parallel quantum wires with weak tunneling

We study collective and single-particle intersubband excitations in a system of quantum wires coupled via weak tunneling. For an isolated wire with parabolic confinement, the Kohn's theorem guarantees that the absorption spectrum represents a single sharp peak centered at the frequency given by the bare confining potential. We show that the effect of weak tunneling between two parabolic quantum wires is twofold: (i) additional peaks corresponding to single-particle excitations appear in the absorption spectrum, and (ii) the main absorption peak acquires a depolarization shift. We also show that the interplay between tunneling and weak perpendicular magnetic field drastically enhances the dispersion of single-particle excitations. The latter leads to a strong damping of the intersubband plasmon for magnetic fields exceeding a critical value.Comment: 18 pages + 6 postcript figure

Aberrations of anterior insular cortex functional connectivity in nontreatment-seeking alcoholics

An emergent literature suggests that resting state functional magnetic resonance imaging (rsfMRI) functional connectivity (FC) patterns are aberrant in alcohol use disorder (AUD) populations. The salience network (SAL) is an established set of brain regions prominent in salience attribution and valuation, and includes the anterior insular cortex (AIC). The SAL is thought to play a role in AUD through directing increased attention to interoceptive cues of intoxication. There is very little information on the salience network (SAL) in AUD, and, in particular, there are no data on SAL FC in currently drinking, nontreatment seeking individuals with AUD (NTS). rsfMRI data from 16 NTS and 21 social drinkers (SD) were compared using FC correlation maps from ten seed regions of interest in the bilateral AIC. As anticipated, SD subjects demonstrated greater insular FC with frontal and parietal regions. We also found that, compared to SD, NTS had higher insular FC with hippocampal and medial orbitofrontal regions. The apparent overactivity in brain networks involved in salience, learning, and behavioral control in NTS suggests possible mechanisms in the development and maintenance of AUD

Enhanced suppresion of localization in a continuous Random-Dimer Model

We consider a one-dimensional continuous (Kronig-Penney) extension of the (tight-binding) Random Dimer model of Dunlap et al. [Phys. Rev. Lett. 65, 88 (1990)]. We predict that the continuous model has infinitely many resonances (zeroes of the reflection coefficient) giving rise to extended states instead of the one resonance arising in the discrete version. We present exact, transfer-matrix numerical calculations supporting, both realizationwise and on the average, the conclusion that the model has a very large number of extended states.Comment: 10 pages, 3 Figures available on request, REVTeX 3.0, MA/UC3M/1/9

Exploring the randomness of Directed Acyclic Networks

The feed-forward relationship naturally observed in time-dependent processes and in a diverse number of real systems -such as some food-webs and electronic and neural wiring- can be described in terms of so-called directed acyclic graphs (DAGs). An important ingredient of the analysis of such networks is a proper comparison of their observed architecture against an ensemble of randomized graphs, thereby quantifying the {\em randomness} of the real systems with respect to suitable null models. This approximation is particularly relevant when the finite size and/or large connectivity of real systems make inadequate a comparison with the predictions obtained from the so-called {\em configuration model}. In this paper we analyze four methods of DAG randomization as defined by the desired combination of topological invariants (directed and undirected degree sequence and component distributions) aimed to be preserved. A highly ordered DAG, called \textit{snake}-graph and a Erd\:os-R\'enyi DAG were used to validate the performance of the algorithms. Finally, three real case studies, namely, the \textit{C. elegans} cell lineage network, a PhD student-advisor network and the Milgram's citation network were analyzed using each randomization method. Results show how the interpretation of degree-degree relations in DAGs respect to their randomized ensembles depend on the topological invariants imposed. In general, real DAGs provide disordered values, lower than the expected by chance when the directedness of the links is not preserved in the randomization process. Conversely, if the direction of the links is conserved throughout the randomization process, disorder indicators are close to the obtained from the null-model ensemble, although some deviations are observed.Comment: 13 pages, 5 figures and 5 table