1,080 research outputs found
Numerical modelling-based damage diagnostics in cultural heritage structures
In this paper, a numerical modelling-based damage diagnostics methodology is proposed for cultural heritage structures (CHSs) made of masonry. Firstly, an integration of 3D documentation data (i.e. point clouds and virtual tours) is developed for the rapid numerical model generation of CHSs. This allows to directly exploit non-comprehensive point clouds (e.g., associated to outer surfaces only) for the solid finite element model generation, where the lacking information is merged with off-site interactive and immersive frameworks. Secondly, a number of nonlinear static and dynamic analyses are conducted on the generated solid model to account for various load scenarios (e.g., earthquakes, soil settlements, etc.), considering a nonlinear continuum constitutive law. Thirdly, a crack pattern matching indicator is introduced to quantitatively identify the most likely load scenario which originated the damage pattern present in the CHS, by comparing numerical and actual crack patterns. The proposed methodology allows to rapidly generate and extract the numerical model that reflects the current (damaged) state of the CHS. This also allows to identify the parts of the CHS susceptible to further damage. The effectiveness of the proposed methodology is promisingly assessed on an actual historical masonry structure, the Morris Island lighthouse in South Carolina (USA)
Influence of mechanical and geometrical properties of embedded long-gauge strain sensors on the accuracy of strain measurement
In many civil and geotechnical applications it is of interest to monitor the strain deep inside the structure; consequently, it is necessary to embed the sensors into the structure's material. Construction and geotechnical materials, such as concrete and soil, can be affected by local defects, e.g. cracks, air pockets and inclusions. To monitor these materials at a structural level it is necessary to use long-gauge sensors. As the sensor has to be embedded in the host material, its presence causes perturbation of the strain field and influences the accuracy of the strain measurement. The aim of this research was to identify the critical parameters that influence the accuracy of the strain measurement, to study how these parameters affect the accuracy, and to give recommendations for sensor users. The study was based on finite element analysis and all involved materials were assumed to have the MöhrCoulomb elastic, perfectly plastic behavior. A suitability of the numerical model for the analysis was verified using the experimental results of two cases reported in the literature and one on-site application. The study revealed that the most important parameters that influence the accuracy of the strain measurement are the goodness of interaction (strain transfer) between the host material and the anchor pieces of the sensor, the ratio between equivalent Young's modulus of the sensor and the Young's modulus of the host material, the radius of the anchor piece and the gauge length. The numerical model and parametric study are presented in detail along with practical recommendations. © 2012 IOP Publishing Ltd.The authors would like to thank the Spanish Ministry of Education, with support received under the National Program for Mobility of Researchers (O.M. EDU/1456/2010, ref. PR2010-0293) which enabled the joint work that made this study possible. The Streicker Bridge project was realized with help of Turner Construction Co., HNTB, AG Construction Corp., Vollers Excavating & Constr., SMARTEC SA, Micron Optics, Princeton Facilities, and staff and students of CEE department of Princeton University.Calderón García, PA.; Glisic, B. (2012). Influence of mechanical and geometrical properties of embedded long-gauge strain sensors on the accuracy of strain measurement. Measurement Science and Technology. (23):1-15. https://doi.org/10.1088/0957-0233/23/6/065604S11523Glišić, B., & Inaudi, D. (2007). Fibre Optic Methods for Structural Health Monitoring. doi:10.1002/9780470517819Ansari, F. (2007). Practical Implementation of Optical Fiber Sensors in Civil Structural Health Monitoring. Journal of Intelligent Material Systems and Structures, 18(8), 879-889. doi:10.1177/1045389x06075760Li, H.-N., Zhou, G.-D., Ren, L., & Li, D.-S. (2009). Strain Transfer Coefficient Analyses for Embedded Fiber Bragg Grating Sensors in Different Host Materials. Journal of Engineering Mechanics, 135(12), 1343-1353. doi:10.1061/(asce)0733-9399(2009)135:12(1343)Torres, B., Payá-Zaforteza, I., Calderón, P. A., & Adam, J. M. (2011). Analysis of the strain transfer in a new FBG sensor for Structural Health Monitoring. Engineering Structures, 33(2), 539-548. doi:10.1016/j.engstruct.2010.11.012Kesavan, K., Ravisankar, K., Parivallal, S., Sreeshylam, P., & Sridhar, S. (2010). Experimental studies on fiber optic sensors embedded in concrete. Measurement, 43(2), 157-163. doi:10.1016/j.measurement.2009.08.010Azenha, M., Faria, R., & Ferreira, D. (2009). Identification of early-age concrete temperatures and strains: Monitoring and numerical simulation. Cement and Concrete Composites, 31(6), 369-378. doi:10.1016/j.cemconcomp.2009.03.004Glisic, B. (2011). Influence of the gauge length on the accuracy of long-gauge sensors employed in monitoring of prismatic beams. Measurement Science and Technology, 22(3), 035206. doi:10.1088/0957-0233/22/3/035206Leng, J. S., Winter, D., Barnes, R. A., Mays, G. C., & Fernando, G. F. (2006). Structural health monitoring of concrete cylinders using protected fibre optic sensors. Smart Materials and Structures, 15(2), 302-308. doi:10.1088/0964-1726/15/2/009Calderón, P. A., Adam, J. M., Ivorra, S., Pallarés, F. J., & Giménez, E. (2009). Design strength of axially loaded RC columns strengthened by steel caging. Materials & Design, 30(10), 4069-4080. doi:10.1016/j.matdes.2009.05.014Adam, J. M., Ivorra, S., Pallarés, F. J., Giménez, E., & Calderón, P. A. (2009). Axially loaded RC columns strengthened by steel caging. Finite element modelling. Construction and Building Materials, 23(6), 2265-2276. doi:10.1016/j.conbuildmat.2008.11.014Adam, J. M., Ivorra, S., Pallares, F. J., Jiménez, E., & Calderón, P. A. (2008). Column–joint assembly in RC columns strengthened by steel caging. Proceedings of the Institution of Civil Engineers - Structures and Buildings, 161(6), 337-348. doi:10.1680/stbu.2008.161.6.337Adam, J. M., Ivorra, S., Pallares, F. J., Giménez, E., & Calderón, P. A. (2009). Axially loaded RC columns strengthened by steel cages. Proceedings of the Institution of Civil Engineers - Structures and Buildings, 162(3), 199-208. doi:10.1680/stbu.2009.162.3.199Johansson, M., & Gylltoft, K. (2001). Structural behavior of slender circular steel-concrete composite columns under various means of load application. Steel and Composite Structures, 1(4), 393-410. doi:10.12989/scs.2001.1.4.393Johansson, M., & Gylltoft, K. (2002). Mechanical Behavior of Circular Steel–Concrete Composite Stub Columns. Journal of Structural Engineering, 128(8), 1073-1081. doi:10.1061/(asce)0733-9445(2002)128:8(1073
Development of a Displacement Sensor for the CERN-LHC Superconducting Cryodipoles
One of the main challenges of the Large Hadron Collider (LHC), the particle accelerator under construction at CERN (the European Organization for Nuclear Research) in Geneva, resides in the design and production of the superconducting dipoles used to steer the particles around a 27 km underground tunnel. These so-called cryodipoles are composed of an evacuated cryostat and a cold mass, that contains the particle tubes and the superconducting dipole magnet and is cooled by super uid Helium at 1.9 K. The particle beam must be centred within the dipole magnetic field with a sub-millimetre accuracy, this requires in turn that the relative displacements between the cryostat and the cold mass must be monitored with accuracy. Because of the extreme environmental conditions (the displacement measurements must be made in vacuum and between two points at a temperature difference of about 300 degrees) no adequate existing monitoring system was found for this application. It was therefore decided to develop an optical sensor suitable for this application. This contribution describes the development of this novel sensor and the first measurements performed on the LHC cryodipoles
Predicted enhanced human propensity of current avian-like H1N1 swine influenza virus from China
Influenza A virus (IAV) subtypes against which little or no pre-existing immunity exists in humans represent a serious threat to global public health. Monitoring of IAV in animal hosts is essential for early and rapid detection of potential pandemic IAV strains to prevent their spread. Recently, the increased pandemic potential of the avian-like swine H1N1 IAV A/swine/Guangdong/104/2013 has been suggested. The virus is infectious in humans and the general population seems to lack neutralizing antibodies against this virus. Here we present an in silico analysis that shows a strong human propensity of this swine virus further confirming its pandemic potential. We suggest mutations which would further enhance its human propensity. We also propose conserved antigenic determinants which could serve as a component of a prepandemic vaccine. The bioinformatics tool, which can be used to further monitor the evolution of swine influenza viruses towards a pandemic virus, are described here and are made publically available (http://www.vin.bg.ac.rs/180/tools/iav-mon.php; http://www.biomedprotection.com/iav-mon.php)
Mapping of Dietary Interventions Beneficial in the Prevention of Secondary Health Conditions in Spinal Cord Injured Population: A Systematic Review.
OBJECTIVES
Individuals with spinal cord injury are at risk of secondary health conditions (SHC) that develop as a consequence of autonomic dysfunction, prolonged oxidative stress and inflammation, and physical inactivity coupled with inadequate energy and nutritional intake. SHC can be debilitating and even life-threatening, and its prevention remains one of the major challenges in the continuum of medical care of aging SCI population. An unhealthy diet is a major driver of inflammation, oxidative stress, and unfavourable metabolic status and may be a practical preventive target to tackle increased SHC risk post-injury.
AIMS
To provide a catalogue of dietary interventions beneficial in prevention of SHC among individuals with SCI by conducting a systematic review of the literature on dietary interventions and dietary supplementation in promoting health and well-being after the injury. In addition, we aimed to provide a summary of observational studies exploring the association between habitual diet (macro- and micronutrients intake and dietary patterns) and health patterns following the injury.
METHOD
This review was registered at PROSPERO (University of York) with registration number CRD42022373773. Four medical databases (EMBASE.com, MEDLINE [Ovid], Cochrane CENTRAL, and Web of Science Core Collection) and Google Scholar were searched from inception until 11th July 2022. Studies were included if they were clinical trials or observational studies conducted in adult individuals with SCI and provided information of interest. Based on strength of the study design and risk of bias assessment (using the NIH tool), we classified studies from Level 1 (most reliable studies) to Level 4 (least reliable studies).
RESULTS
Of 12,313 unique citations, 47 articles (based on 43 original studies) comprising 32 interventional (22 RCTs, 3 NRCT, and 7 pre-post studies) and 11 observational studies (2 cohort studies, 2 case-control, 1 post-intervention follow-up study, and 6 cross-sectional studies) were included in the present systematic review. Twenty studies (46.5%) were classified as Level 1 or 2, indicating high/moderate methodological quality. Based on those studies, dietary strategies including high protein diet, intermittent fasting, balanced diet in combination with physical conditioning and electrical stimulation, and dietary supplementation including alpha-lipoic acid, creatine, vitamin D, and cranberry-derived supplements and probiotics were mapped as the most promising in prevention of SHC among individuals with SCI.
CONCLUSIONS
To develop timely and effective preventive strategies targeting major SHC (e.g., cardiometabolic diseases, urinary tract infections) in SCI, further research is warranted to confirm the effectiveness of dietary strategies/interventions identified through the current systematic review of the literature
At-Risk and Recent-Onset Type 1 Diabetic Subjects Have Increased Apoptosis in the CD4+CD25+(high) T-Cell Fraction
BACKGROUND: In experimental models, Type 1 diabetes T1D can be prevented by adoptive transfer of CD4+CD25+ FoxP3+ suppressor or regulatory T cells. Recent studies have found a suppression defect of CD4+CD25+(high) T cells in human disease. In this study we measure apoptosis of CD4+CD25+(high) T cells to see if it could contribute to reduced suppressive activity of these cells. METHODS AND FINDINGS: T-cell apoptosis was evaluated in children and adolescent 35 females/40 males subjects comprising recent-onset and long-standing T1D subjects and their first-degree relatives, who are at variable risk to develop T1D. YOPRO1/7AAD and intracellular staining of the active form of caspase 3 were used to evaluate apoptosis. Isolated CD4+CD25+(high) and CD4+CD25− T cells were co-cultured in a suppression assay to assess the function of the former cells. We found that recent-onset T1D subjects show increased apoptosis of CD4+CD25+(high) T cells when compared to both control and long-standing T1D subjects p<0.0001 for both groups. Subjects at high risk for developing T1D 2–3Ab+ve show a similar trend p<0.02 and p<0.01, respectively. On the contrary, in long-standing T1D and T2D subjects, CD4+CD25+(high) T cell apoptosis is at the same level as in control subjects p = NS. Simultaneous intracellular staining of the active form of caspase 3 and FoxP3 confirmed recent-onset FoxP3+ve CD4+CD25+(high) T cells committed to apoptosis at a higher percentage 15.3±2.2 compared to FoxP3+ve CD4+CD25+(high) T cells in control subjects 6.1±1.7 p<0.002. Compared to control subjects, both recent-onset T1D and high at-risk subjects had significantly decreased function of CD4+CD25+(high) T cells p = 0.0007 and p = 0.007, respectively. CONCLUSIONS: There is a higher level of ongoing apoptosis in CD4+CD25+(high) T cells in recent-onset T1D subjects and in subjects at high risk for the disease. This high level of CD4+CD25+(high) T-cell apoptosis could be a contributing factor to markedly decreased suppressive potential of these cells in recent-onset T1D subjects
Apoptosis of CD4+CD25high T Cells in Type 1 Diabetes May Be Partially Mediated by IL-2 Deprivation
from T1D subjects. in T1D may be caught up in a relatively deficient cytokine milieu. function in subjects predisposed to T1D
Apoptosis of Purified CD4+ T Cell Subsets Is Dominated by Cytokine Deprivation and Absence of Other Cells in New Onset Diabetic NOD Mice
BACKGROUND: Regulatory T cells (Treg) play a significant role in immune homeostasis and self-tolerance. Excessive sensitivity of isolated Treg to apoptosis has been demonstrated in NOD mice and humans suffering of type 1 diabetes, suggesting a possible role in the immune dysfunction that underlies autoimmune insulitis. In this study the sensitivity to apoptosis was measured in T cells from new onset diabetic NOD females, comparing purified subsets to mixed cultures. PRINCIPAL FINDINGS: Apoptotic cells are short lived in vivo and death occurs primarily during isolation, manipulation and culture. Excessive susceptibility of CD25(+) T cells to spontaneous apoptosis is characteristic of isolated subsets, however disappears when death is measured in mixed splenocyte cultures. In variance, CD25(-) T cells display balanced sensitivity to apoptosis under both conditions. The isolation procedure removes soluble factors, IL-2 playing a significant role in sustaining Treg viability. In addition, pro- and anti-apoptotic signals are transduced by cell-to-cell interactions: CD3 and CD28 protect CD25(+) T cells from apoptosis, and in parallel sensitize naïve effector cells to apoptosis. Treg viability is modulated both by other T cells and other subsets within mixed splenocyte cultures. Variations in sensitivity to apoptosis are often hindered by fast proliferation of viable cells, therefore cycling rates are mandatory to adequate interpretation of cell death assays. CONCLUSIONS: The sensitivity of purified Treg to apoptosis is dominated by cytokine deprivation and absence of cell-to-cell interactions, and deviate significantly from measurements in mixed populations. Balanced sensitivity of naïve/effector and regulatory T cells to apoptosis in NOD mice argues against the concept that differential susceptibility affects disease evolution and progression
Roadmap on measurement technologies for next generation structural health monitoring systems
Structural health monitoring (SHM) is the automation of the condition assessment process of an engineered system. When applied to geometrically large components or structures, such as those found in civil and aerospace infrastructure and systems, a critical challenge is in designing the sensing solution that could yield actionable information. This is a difficult task to conduct cost-effectively, because of the large surfaces under consideration and the localized nature of typical defects and damages. There have been significant research efforts in empowering conventional measurement technologies for applications to SHM in order to improve performance of the condition assessment process. Yet, the field implementation of these SHM solutions is still in its infancy, attributable to various economic and technical challenges. The objective of this Roadmap publication is to discuss modern measurement technologies that were developed for SHM purposes, along with their associated challenges and opportunities, and to provide a path to research and development efforts that could yield impactful field applications. The Roadmap is organized into four sections: distributed embedded sensing systems, distributed surface sensing systems, multifunctional materials, and remote sensing. Recognizing that many measurement technologies may overlap between sections, we define distributed sensing solutions as those that involve or imply the utilization of numbers of sensors geometrically organized within (embedded) or over (surface) the monitored component or system. Multi-functional materials are sensing solutions that combine multiple capabilities, for example those also serving structural functions. Remote sensing are solutions that are contactless, for example cell phones, drones, and satellites. It also includes the notion of remotely controlled robots
- …