Three-dimensional models of conventional and vertical junction laser-photovoltaic energy converters

Three-dimensional models of both conventional planar junction and vertical junction photovoltaic energy converters have been constructed. The models are a set of linear partial differential equations and take into account many photoconverter design parameters. The model is applied to Si photoconverters; however, the model may be used with other semiconductors. When used with a Nd laser, the conversion efficiency of the Si vertical junction photoconverter is 47 percent, whereas the efficiency for the conventional planar Si photoconverter is only 17 percent. A parametric study of the Si vertical junction photoconverter is then done in order to describe the optimum converter for use with the 1.06-micron Nd laser. The efficiency of this optimized vertical junction converter is 44 percent at 1 kW/sq cm

Photovoltaic conversion of laser power to electrical power

Photovoltaic laser to electric converters are attractive for use with a space-based laser power station. The results of modeling studies for a silicon vertical junction converter used with a Nd laser are given. A computer code was developed for the model and this code was used to conduct a parametric study for a Si vertical junction converter consisting of one p-n junction irradiated with a Nd laser. These calculations predict an efficiency over 50 percent for an optimized converter

Mathematical modeling of a photovoltaic-laser energy converter for iodine laser radiation

Space-based laser power systems will require converters to change laser radiation into electricity. Vertical junction photovoltaic converters are promising devices for this use. A promising laser for the laser power station is the t-C4F9I laser which emits radiation at a wavelength of 1.315 microns. This paper describes the results of mathematical modeling of a photovoltaic-laser energy converter for use with this laser. The material for this photovoltaic converter is Ga(53)In(47)As which has a bandgap energy of 0.94 eV, slightly below the energy of the laser photons (0.943 eV). Results of a study optimizing the converter parameters are presented. Calculated efficiency for a 1000 vertical junction converter is 42.5 percent at a power density of 1 x 10 to the 3d power w/sq cm

Clean Kinematic Samples in Dwarf Spheroidals: An Algorithm for Evaluating Membership and Estimating Distribution Parameters When Contamination is Present

(abridged) We develop an algorithm for estimating parameters of a distribution sampled with contamination, employing a statistical technique known as ``expectation maximization'' (EM). Given models for both member and contaminant populations, the EM algorithm iteratively evaluates the membership probability of each discrete data point, then uses those probabilities to update parameter estimates for member and contaminant distributions. The EM approach has wide applicability to the analysis of astronomical data. Here we tailor an EM algorithm to operate on spectroscopic samples obtained with the Michigan-MIKE Fiber System (MMFS) as part of our Magellan survey of stellar radial velocities in nearby dwarf spheroidal (dSph) galaxies. These samples are presented in a companion paper and contain discrete measurements of line-of-sight velocity, projected position, and Mg index for ~1000 - 2500 stars per dSph, including some fraction of contamination by foreground Milky Way stars. The EM algorithm quantifies both dSph and contaminant distributions, returning maximum-likelihood estimates of the means and variances, as well as the probability that each star is a dSph member. Applied to our MMFS data, the EM algorithm identifies more than 5000 probable dSph members. We test the performance of the EM algorithm on simulated data sets that represent a range of sample size, level of contamination, and amount of overlap between dSph and contaminant velocity distributions. The simulations establish that for samples ranging from large (N ~3000) to small (N~30), the EM algorithm distinguishes members from contaminants and returns accurate parameter estimates much more reliably than conventional methods of contaminant removal (e.g., sigma clipping).Comment: Accepted for publication in The Astronomical Journal. Download pdf with full-resolution figures from http://www.ast.cam.ac.uk/~walker/dsph_em.pd

Diet Hypotheses in Light of the Microbiota Revolution: New Perspectives.

From an evolutionary standpoint, allergy has only recently emerged as a significant health problem. Various hypotheses were proposed to explain this, but they all indicated the importance of rapid lifestyle changes, which occurred in industrialized countries in the last few decades. In this review, we discuss evidence from epidemiological and experimental studies that indicate changes in dietary habits may have played an important role in this phenomenon. Based on the example of dietary fiber, we discuss molecular mechanisms behind this and point towards the importance of diet-induced changes in the microbiota. Finally, we reason that future studies unraveling mechanisms governing these changes, along with the development of better tools to manipulate microbiota composition in individuals will be crucial for the design of novel strategies to combat numerous inflammatory disorders, including atopic diseases

Interstellar solid hydrogen

We consider the possibility that solid molecular hydrogen is present in interstellar space. If so cosmic-rays and energetic photons cause ionization in the solid leading to the formation of H+6. This ion is not produced by gas-phase reactions and its radiative transitions therefore provide a signature of solid H2 in the astrophysical context. The vibrational transitions of H+6 are yet to be observed in the laboratory, but we have characterized them in a quantum-theoretical treatment of the molecule; our calculations include anharmonic corrections, which are large. Here we report on those calculations and compare our results with astronomical data. In addition to the H+6 isotopomer, we focus on the deuterated species (HD)+3 which is expected to dominate at low ionization rates as a result of isotopic condensation reactions. We can reliably predict the frequencies of the fundamental bands for five modes of vibration. For (HD)+3 all of these are found to lie close to some of the strongest of the pervasive mid-infrared astronomical emission bands, making it difficult to exclude hydrogen precipitates on observational grounds. By the same token these results suggest that (HD)+3 could be the carrier of the observed bands. We consider this possibility within the broader picture of interstellar medium photo-processes and we conclude that solid hydrogen may indeed be abundant in astrophysical environments

P/N In(Al) GaAs multijunction laser power converters

Eight In(AI)GaAs PN junctions grown epitaxially on the semi-insulating wafer were monolithically integrated in series to boost the approximately 0.4V photovoltage per typical In(Al)GaAs junction to over 3 volts for the 1 sq cm laser power converted (LPC) chip. Advantages of multijunction LCP designs include the need for less circuitry for power reconditioning and the potential for lower I(sup 2)R power loss. As an example, these LPC's have a responsivity of approximately 1 amp/watt. With a single junction LPC, 100 watts/sq cm incident power would lead to about 100 A/sq cm short-circuit current at approximately 0.4V open-cicuit voltage. One disadvantage is the large current would lead to a large I(sup 2)R loss which would lower the fill factor so that 40 watts/sq cm output would not be obtained. Another is that few circuits are designed to work at 0.4 volts, so DC-DC power conversion circuitry would be necessary to raise the voltage to a reasonable level. The multijunction LPC being developed in this program is a step toward solving these problems. In the above example, an eight-junction LPC would have eight times the voltage, approximately 3V, so that DC-DC power conversion may not be needed in many instances. In addition, the multijunction LPC would have 1/8 the current of a single-junction LPC, for only 1/64 the I(sup 2)R loss if the series resistance is the same. Working monolithic multijunction laser power converters (LPC's) were made in two different compositions of the In(x)Al(y)Ga(1-x-y)As semiconductor alloy, In(0.53)Ga(0.47)As (0.74 eV) and In(0.5)Al(0.1)Ga(0.4)As (0.87 eV). The final 0.8 sq cm LPC's had output voltages of about 3 volts and output currents up to about one-half amp. Maximum 1.3 micron power conversion efficiencies were approximately 22 percent. One key advantage of multijunction LPC's is that they have higher output voltages, so that less DC-DC power conversion circuitry is needed in applications

Tutors’ Responses to Student Disclosures: From “Suicidal Ideation” to “Feeling a Little Stressed”

Tutors in higher education are receiving and responding to student disclosures that include racism, anxiety, loneliness, legal disputes, family upheavals, physical, emotional, and mental health, bereavement, legal battles, and harassment. In many cases, this caring aspect of the tutor role is not acknowledged, allocated time in job descriptions, or accurately remunerated. This qualitative study explored how tutors experienced and managed student disclosures, the personal and professional impact of responding to disclosures, and how tutors believed they could be better supported. Data was collected from two cohorts of participants tutoring at a University in Aotearoa New Zealand. using interviews and questionnaires and analysed by reflexive thematic analysis. Our findings showed that our participants believed they were positioned vulnerably between a rock and a hard place. At the rock, tutors were told to follow university guidelines and refer distressed students to over-loaded course coordinators or over-subscribed support services. At the hard place, tutors were often the first to be disclosed to, because of their front-facing positioning at the university and once they had heard the disclosure felt it was unethical not to try and help. Tutors believed they could assist students with personal challenges if their precarious positioning within the university was protected and strengthened and if appropriate support was provided by their university through training, time, and remuneration. Findings have implications for higher education providers to reconsider how tutors are supported to support students

Influence, originality and similarity in directed acyclic graphs

We introduce a framework for network analysis based on random walks on directed acyclic graphs where the probability of passing through a given node is the key ingredient. We illustrate its use in evaluating the mutual influence of nodes and discovering seminal papers in a citation network. We further introduce a new similarity metric and test it in a simple personalized recommendation process. This metric's performance is comparable to that of classical similarity metrics, thus further supporting the validity of our framework.Comment: 6 pages, 4 figure