Fast transport, atom sample splitting and single-atom qubit supply in two-dimensional arrays of optical microtraps

Two-dimensional arrays of optical microtraps created by micro-optical elements present a versatile and scalable architecture for neutral atom quantum information processing, quantum simulation and the manipulation of ultra-cold quantum gases. In this paper, we demonstrate the advanced capabilities of this approach by introducing novel techniques and functionalities as well as the combined operation of previous separately implemented functions. We introduce piezo-actuator-based transport of atom ensembles over distances of more than one trap separation, examine the capabilities of rapid atom transport provided by acousto-optical beam steering and analyse the adiabaticity limit for atom transport in these configurations. We implement a spatial light modulator with 8 bit transmission control for the per-site adjustment of the trap depth and the number of atoms loaded. We combine single-site addressing, trap depth control and atom transport in one configuration for demonstrating the splitting of atom ensembles with variable ratio at predefined register sites. Finally, we use controlled sub-poissonian preparation of single trapped atoms from such an ensemble to show that our approach allows for the implementation of a continuous supply of single-atom qubits with high fidelity. These novel implementations and their combined operation significantly extend available techniques for the dynamical and reconfigurable manipulation of ultra-cold atoms in dipole traps

Tuneable VCSEL aiming for the application in interconnects and short haul systems

Widely tunable vertical cavity surface emitting lasers (VCSEL) are of high interest for optical communications, gas spectroscopy and fiber-Bragg-grating measurements. In this paper we present tunable VCSEL operating at wavelength around 850 nm and 1550 nm with tuning ranges up to 20 nm and 76 nm respectively. The first versions of VCSEL operating at 1550 nm with 76 nm tuning range and an output power of 1.3mW were not designed for high speed modulation, but for applications where only stable continious tuning is essential (e.g. gas sensing). The next step was the design of non tunable VCSEL showing high speed modulation frequencies of 10 GHz with side mode supression ratios beyond 50 dB. The latest version of these devices show record output powers of 6.7mW at 20 °C and 3mW at 80 °C. The emphasis of our present and future work lies on the combination of both technologies. The tunable VCSEL operating in the 850 nm-region reaches a modulation bandwidth of 5.5GHz with an output power of 0.8mW

Amyloid-β aggregates activate peripheral monocytes in mild cognitive impairment

\ua9 The Author(s) 2024. The peripheral immune system is important in neurodegenerative diseases, both in protecting and inflaming the brain, but the underlying mechanisms remain elusive. Alzheimer’s Disease is commonly preceded by a prodromal period. Here, we report the presence of large Aβ aggregates in plasma from patients with mild cognitive impairment (n = 38). The aggregates are associated with low level Alzheimer’s Disease-like brain pathology as observed by 11C-PiB PET and 18F-FTP PET and lowered CD18-rich monocytes. We characterize complement receptor 4 as a strong binder of amyloids and show Aβ aggregates are preferentially phagocytosed and stimulate lysosomal activity through this receptor in stem cell-derived microglia. KIM127 integrin activation in monocytes promotes size selective phagocytosis of Aβ. Hydrodynamic calculations suggest Aβ aggregates associate with vessel walls of the cortical capillaries. In turn, we hypothesize aggregates may provide an adhesion substrate for recruiting CD18-rich monocytes into the cortex. Our results support a role for complement receptor 4 in regulating amyloid homeostasis

Using Cognitive Interviewing for the Semantic Enhancement of Multi-Lingual Versions of Personality Questionnaires

We discuss the use of cognitive interviewing with bilinguals as an integral part of cross-cultural adaptation of personality questionnaires. The aim is to maximize semantic equivalence to increase the likelihood of items maintaining the intended structure and meaning in the target language. We refer to this part of adaptation as semantic enhancement, and integrate cognitive interviewing within it as a tool for scrutinizing translations, the connotative meaning, and the psychological impact of items across languages. During the adaptation of a work-based personality questionnaire from English to Arabic, Chinese (Mandarin), and Spanish, we cognitively interviewed 12 bilingual participants about 136 items in different languages (17% of all items), of which 67 were changed. A content analysis categorizing the reasons for amending items elicited eleven errors that affect two identified forms of semantic equivalence. We provide the resultant coding scheme as a framework for designing cognitive interviewing protocols and propose a procedure for implementing them. We discuss implications for theory and practic

Сутність та класифікація ризиків інвестиційної діяльності

Наводиться визначення поняттю "ризики інвестиційної діяльності" за рахунок поєднання його сутнісних характеристик, виконано узагальнення класифікації цих ризиків, запропоновано введення нової класифікаційної групи – "корпоративні ризики", які пов'язані з можливістю втрати контролю над підприємством інвестором-акціонером

New Alloying Systems for Sintered Steels: Critical Aspects of Sintering Behavior

Oxygen-sensitive alloying elements such as Mn, Si, and Cr have a high potential for improving the properties of low alloyed sintered steels while reducing the alloying cost. However, it is necessary to find a way for avoiding, or at least minimizing, the oxidation of these elements especially during the early stages of the sintering cycle. In this study Mn, Si, and Cr were introduced in the form of a master alloy powder designed to be mixed with the iron base powder and provide the final composition of the steel during the sintering process. The reduction/oxidation phenomena taking place during the heating stage were studied by thermogravimetry, dilatometry, and mass spectroscopy, using either reducing (H2) or inert (Ar) atmospheres. The results show how the difference in chemical activity between base iron powder and master alloy causes the so called "internal-getter" effect, by which the reduction of less stable iron oxides leads to oxidation of the elements with higher affinity for oxygen. This effect can be somehow minimized when sintering in H2, since the iron oxides are reduced at lower temperatures at which the reactivity of the elements in the master alloy is lower. However, H2 concentration in the processing atmosphere needs to be carefully adapted to the specific composition of the materials being processed in order to minimize decarburization by methane formation during sintering.Höganäs AB Sweden, financial support provided through the Höganäs Chair IVPublicad

Characterization of active miniature inverted-repeat transposable elements in the peanut genome

Miniature inverted-repeat transposable elements (MITEs), some of which are known as active non-autonomous DNA transposons, are found in the genomes of plants and animals. In peanut (Arachis hypogaea), AhMITE1 has been identified in a gene for fatty-acid desaturase, and possessed excision activity. However, the AhMITE1 distribution and frequency of excision have not been determined for the peanut genome. In order to characterize AhMITE1s, their genomic diversity and transposition ability was investigated. Southern blot analysis indicated high AhMITE1 copy number in the genomes of A. hypogaea, A. magna and A. monticola, but not in A. duranensis. A total of 504 AhMITE1s were identified from the MITE-enriched genomic libraries of A. hypogaea. The representative AhMITE1s exhibited a mean length of 205.5 bp and a GC content of 30.1%, with AT-rich, 9 bp target site duplications and 25 bp terminal inverted repeats. PCR analyses were performed using primer pairs designed against both flanking sequences of each AhMITE1. These analyses detected polymorphisms at 169 out of 411 insertional loci in the four peanut lines. In subsequent analyses of 60 gamma-irradiated mutant lines, four AhMITE1 excisions showed footprint mutations at the 109 loci tested. This study characterizes AhMITE1s in peanut and discusses their use as DNA markers and mutagens for the genetics, genomics and breeding of peanut and its relatives

Variants in the FFAR1 Gene Are Associated with Beta Cell Function

The FFAR1 receptor is expressed mainly in pancreatic beta cells and is activated by medium to long chain free fatty acids (FFAs), as well as by thiazolidinediones, resulting in elevated Ca(2+) concentrations and promotion of insulin secretion. These properties suggest that FFAR1 could be a mediator of lipotoxicity and a potential candidate gene for Type 2 diabetes (T2D). We therefore investigated whether variations at the FFAR1 locus are associated with T2D and beta cell function.We re-sequenced the FFAR1 region in 96 subjects (48 healthy and 48 T2D individuals) and found 13 single nucleotide polymorphisms (SNPs) 8 of which were not previously described. Two SNPs located in the upstream region of the FFAR1 gene (rs1978013 and rs1978014) were chosen and genotyped in 1929 patients with T2D and 1405 healthy control subjects. We observed an association of rs1978013 and rs1978014 with insulinogenic index in males (p = 0.024) and females (p = 0.032), respectively. After Bonferroni corrections, no association with T2D was found in the case-control material, however a haplotype consisting of the T-G alleles conferred protection against T2D (p = 0.0010).Variation in the FFAR1 gene may contribute to impaired beta cell function in T2D

Validation of the conceptual research utilization scale: an application of the standards for educational and psychological testing in healthcare

<p>Abstract</p> <p>Background</p> <p>There is a lack of acceptable, reliable, and valid survey instruments to measure conceptual research utilization (CRU). In this study, we investigated the psychometric properties of a newly developed scale (the CRU Scale).</p> <p>Methods</p> <p>We used the <it>Standards for Educational and Psychological Testing </it>as a validation framework to assess four sources of validity evidence: content, response processes, internal structure, and relations to other variables. A panel of nine international research utilization experts performed a formal content validity assessment. To determine response process validity, we conducted a series of one-on-one scale administration sessions with 10 healthcare aides. Internal structure and relations to other variables validity was examined using CRU Scale response data from a sample of 707 healthcare aides working in 30 urban Canadian nursing homes. Principal components analysis and confirmatory factor analyses were conducted to determine internal structure. Relations to other variables were examined using: (1) bivariate correlations; (2) change in mean values of CRU with increasing levels of other kinds of research utilization; and (3) multivariate linear regression.</p> <p>Results</p> <p>Content validity index scores for the five items ranged from 0.55 to 1.00. The principal components analysis predicted a 5-item 1-factor model. This was inconsistent with the findings from the confirmatory factor analysis, which showed best fit for a 4-item 1-factor model. Bivariate associations between CRU and other kinds of research utilization were statistically significant (p < 0.01) for the latent CRU scale score and all five CRU items. The CRU scale score was also shown to be significant predictor of overall research utilization in multivariate linear regression.</p> <p>Conclusions</p> <p>The CRU scale showed acceptable initial psychometric properties with respect to responses from healthcare aides in nursing homes. Based on our validity, reliability, and acceptability analyses, we recommend using a reduced (four-item) version of the CRU scale to yield sound assessments of CRU by healthcare aides. Refinement to the wording of one item is also needed. Planned future research will include: latent scale scoring, identification of variables that predict and are outcomes to conceptual research use, and longitudinal work to determine CRU Scale sensitivity to change.</p

Multi-tier Loyalty Programs to Stimulate Customer Engagement

Customers differ in their purchase behavior, profitability, attitude toward the firm, and so on. These differences between customers have led to numerous firms introducing multi-tier loyalty programs. A multi-tier loyalty program explicitly distinguishes between customers by means of hierarchical tiers (e.g. Silver, Gold, Platinum) and assigns customers to different tiers based on their past purchase behavior. Next, customers in different tiers are provided varying levels of tangible rewards and intangible benefits, which are potentially powerful instruments to stimulate customer engagement. In this chapter, we focus on the design and effectiveness of such multi-tier loyalty programs. Building on loyalty program and customer prioritization research, we discuss whether, why, and how multi-tier loyalty programs are effective (or not) in influencing customer behavior, thereby enhancing customer engagement and financial performance