12 research outputs found
A shelf-life study of silica- and carbon-based mesoporous materials
Mesoporous silica- and carbon-based materials, including bioactive glasses, have proven potential as components of medical devices and as drug carriers. From an application perspective, knowledge about the shelf-life stability of these materials under various conditions is vital. Here, mesoporous bioactive glasses (MBGs) synthesized by aerosol-assisted spray-drying and by a batch sol–gel method, mesoporous silicas of SBA-15 type, and mesoporous carbons CMK-1 and CMK-3 have been stored under varying conditions, e.g. at different temperature and relative humidity (RH), and in different storage vessels. The results show that the silica-based materials stored in Eppendorfs are sensitive to humidity. Spray dried MBGs decompose within 1 month at a RH >5%, whilst sol–gel MBGs are more stable up to a RH >60%. Changing the storage vessel to sealed glass flasks increases the MBGs lifetime significantly, with no degradation during 2 months of storage at a RH = 75%. SBA-15 stored in Eppendorfs are more stable compared to MBGs, and addition of F- ions added during the synthesis affects the material degradation rate. Mesoporous carbons are stable under all conditions for all time points. This systematic study clearly demonstrates the importance of storage conditions for mesoporous materials which is crucial knowledge for commercialization of these materials
Electrosprayed mesoporous particles for improved aqueous solubility of a poorly water soluble anticancer agent: in vitro and ex vivo evaluation
open access articleEncapsulation of poorly water-soluble drugs into mesoporous materials (e.g. silica) has evolved as a favorable
strategy to improve drug solubility and bioavailability. Several techniques (e.g. spray drying, solvent evaporation,
microwave irradiation) have been utilized for the encapsulation of active pharmaceutical ingredients (APIs) into
inorganic porous matrices. In the present work, a novel chalcone (KAZ3) with anticancer properties was successfully
synthesized by Claisen-Schmidt condensation. KAZ3 was loaded into mesoporous (SBA-15 and MCM-41)
and non-porous (fumed silica, FS) materials via two techniques; electrohydrodynamic atomization (EHDA) and
solvent impregnation. The effect of both loading methods on the physicochemical properties of the particles (e.g.
size, charge, entrapment efficiency, crystallinity, dissolution and permeability) was investigated. Results indicated
that EHDA technique can load the active in a complete amorphous form within the pores of the silica particles.
In contrast, reduced crystallinity (~79%) was obtained for the solvent impregnated formulations. EHDA
engineered formulations significantly improved drug dissolution up to 30-fold, compared to the crystalline drug.
Ex vivo studies showed EHDA formulations to exhibit higher permeability across rat intestine than their solvent
impregnated counterparts. Cytocompatibility studies on Caco-2 cells demonstrated moderate toxicity at high concentrations
of the anticancer agent. The findings of the present study clearly show the immense potential of
EHDA as a loading technique for mesoporous materials to produce poorly water-soluble API carriers of high payload
at ambient conditions. Furthermore, the scale up potential in EHDA technologies indicate a viable route to
enhance drug encapsulation and dissolution rate of loaded porous inorganic materials
Comparing hydrogen sorption in different Pd-doped pristine and surface-modified nanoporous carbons
Three types of nanoporous carbons (a molecular sieve, an ordered mesoporous carbon and a carbon aerogel) with distinctively different porous properties were subjected to surface modification through wet oxidation and subsequent metal doping with Pd nanoparticles. The H2 sorption performance of the carbons and their doped analogues was examined at 298 K up to 20 bar. The introduction of different oxygen containing groups in the three carbons enhances the amount of sorbed hydrogen, while the rather complex mechanism of sorption seems to be positively influenced by the small size of the pores and the surface chemistry. It was shown that in all cases a synergistic effect between the metal and the oxidized carbon takes place, leading to enhanced hydrogen sorption through reversible processes, which however is not sufficient to meet the demanding targets for practical applications
Hydrogen storage properties of Pd-doped thermally oxidized single wall carbon nanohorns.
Single wall carbon nanohorns as well as their thermally oxidized derivatives were decorated with Pd nanoparticles and their H2 sorption performance was examined at 298 K up to 20 bar. The specific surface area of the nanohorns was increased through air oxidation, while both the thermal treatment and the metal doping led to the enhancement of the H2 uptake. The higher uptake of the hybrid materials could not be attributed only to the additive effect of the carbon support and Pd content suggesting the existence of a cooperative mechanism between the metal particles and the carbon surface. This weak chemisorption process was found to be fully reversible after mild heating; still, its contribution to the overall H2 uptake was not found to be of great significance
Optical projection tomography via phase retrieval algorithms
We describe a computational method for accurate, quantitative tomographic reconstructions in Optical Projection Tomography, based on phase retrieval algorithms. Our method overcomes limitations imposed by light scattering in opaque tissue samples under the memory effect regime, as well as reduces artifacts due to mechanical movements, misalignments or vibrations. We make use of Gerchberg–Saxton algorithms, calculating first the autocorrelation of the object and then retrieving the associated phase under four numerically simulated measurement conditions. By approaching the task in such a way, we avoid the projection alignment procedure, exploiting the fact that the autocorrelation sinogram is always aligned and centered. We thus propose two new, projection-based, tomographic imaging flowcharts that allow registration-free imaging of opaque biological specimens and unlock three-dimensional tomographic imaging of hidden objects. Two main reconstruction approaches are discussed in the text, focusing on their efficiency in the tomographic retrieval and discussing their applicability under four different numerical experiments
Carbon Adsorbents With Dual Porosity for Efficient Removal of Uremic Toxins and Cytokines from Human Plasma
Abstract The number of patients with chronic kidney disease increases while the number of available donor organs stays at approximately the same level. Unavoidable accumulation of the uremic toxins and cytokines for these patients comes as the result of malfunctioning kidneys and their high levels in the blood result in high morbidity and mortality. Unfortunately, the existing methods, like hemodialysis and hemofiltration, provide only partial removal of uremic toxins and/or cytokines from patients’ blood. Consequently, there is an increasing need for the development of the extracorporeal treatments which will enable removal of broad spectrum of uremic toxins that are usually removed by healthy kidneys. Therefore, in this work we developed and tested ordered mesoporous carbons as new sorbents with dual porosity (micro/meso) that provide selective and efficient removal of a broad range of uremic toxins from human plasma. The new sorbents, CMK-3 are developed by nanocasting methods and have two distinct pore domains, i.e. micropores and mesopores, therefore show high adsorption capacity towards small water soluble toxins (creatinine), protein-bound molecules (indoxyl sulfate and hippuric acid), middle molecules (β-2-microglobulin) and cytokines of different size (IL-6 and IL-8). Our results show that small amounts of CMK-3 could provide selective and complete blood purification
Silver decorated mesoporous carbons for the treatment of acute and chronic wounds, in a tissue regeneration context
Introduction: Silver decorated mesoporous carbons are interesting systems that may offer effective solutions for advanced wound care products by combining the well-known antimicrobial activity of silver nanoparticles with the versatile properties of ordered mesoporous carbons. Silver is being used as a topical antimicrobial agent, especially in wound repair. However, while silver shows bactericidal properties, it is also cytotoxic at high concentrations. Therefore, the incorporation of silver into ordered mesoporous carbons allows to exploit both silver’s biological effects and mesoporous carbons’ biocompatibility and versatility with the purpose of conceiving silver-doped materials in light of the growing health concern in wound care. Methods: The wound healing potential of an ordered mesoporous carbon also doped with two different loadings of silver nanoparticles (2 wt% and 10 wt%), was investigated through a biological assessment study based on different assays (cell viability, inflammation, antibacterial tests, macrophage-conditioned fibroblast and human keratinocyte cell cultures). Results: The results show silver-doped ordered mesoporous carbons to positively condition cell viability, with a cell viability percentage >70% even for 10 wt% Ag, to modulate the expression of inflammatory cytokines and of genes involved in tissue repair (KRT6a, VEGFA, IVN) and remodeling (MMP9, TIMP3) in different cell systems. Furthermore, along with the biocompatibility and the bioactivity, the silver-doped ordered mesoporous carbons still retain an antibacterial effect, as shown by a maximum of 13.1% of inhibited area in the Halo test. The obtained results clearly showed that the silver-doped ordered mesoporous carbons exhibit both good biocompatibility and antibacterial effect with enhanced re-epithelialization, angiogenesis promotion and tissue regeneration. Discussion: These findings suggest that the exceptional properties of silver-doped ordered mesoporous carbons could be exploited in the treatment of acute and chronic wounds and that such carbon materials could be potential candidates for use in medical devices for wound healing purposes, in particular, the 10 wt% loading, as the results showed to be the most effective
Comparing hydrogen sorption in different Pd-doped pristine and surface-modified nanoporous carbons
Embedding ordered mesoporous carbons into thermosensitive hydrogels: A cutting-edge strategy to vehiculate a cargo and control its release profile
The high drug loading capacity, cytocompatibility and easy functionalization of ordered mesoporous carbons (OMCs) make them attractive nanocarriers to treat several pathologies. OMCs\u2019 efficiency could be further increased by embedding them into a hydrogel phase for an in loco prolonged drug release. In this work, OMCs were embedded into injectable thermosensitive hydrogels. In detail, rod-like (diameter ca. 250 nm, length ca. 700 nm) and spherical (diameter approximately 120 nm) OMCs were synthesized by nanocasting selected templates and loaded with ibuprofen through a melt infiltration method to achieve complete filling of their pores (100% loading yield). In parallel, an amphiphilic Poloxamer\uae 407-based poly(ether urethane) was synthesized (72 kDa) and solubilized at 15 and 20% w/v concentration in saline solution to design thermosensitive hydrogels. OMC incorporation into the hydrogels (10 mg/mL concentration) did not negatively affect their gelation potential. Hybrid systems successfully released ibuprofen at a slower rate compared to control gels (gels embedding ibuprofen as such), but with no significant differences between rod-like and spherical OMC-loaded gels. OMCs can thus work as effective drug reservoirs that progressively release their payload over time and also upon encapsulation in a hydrogel phase, thus opening the way to their application to treat many different pathological states (e.g., as topical medications)