194 research outputs found
Energy Audit and Analysis of an Institutional Building under Subtropical Climate
Evaluation and estimation of energy consumption are essential in order to classify the amount of energy used and the way it is utilized in building. Hence, the possibility of any energy savings potential and energy savings opportunities can be identified. The intention of this article is to study and evaluate energy usage pattern of the Central Queensland University campus’ buildings, Queensland, Australia. This article presents the field survey results from the audit of an office building and performance-related measurements of the indoor environmental parameters, for instance, indoor air temperature, humidity and energy consumption concerned to the indoor heating and cooling load. Monthly observed energy usage information was employed to investigate influence of the climate conditions on energy usage
Solar assisted cooling rule in indoor air quality
Indoor air quality as always is the centre of attention for researchers, architect developers and public health officials. As every-one know. The human exposure to a variety of indoor pollutants and the high cost of energy are the motivation for these kinds of studies. Fungus and mould growth has always been a problem in subtropical climate areas due to the high temperature and high humidity. Generally in institutional buildings, most of the internal heat load is generated by human body and thermal comfort is achieved with  extensive usage of recycled air and air conditioning. The main considerations in any air conditioning system economisers are based on the usage of recycled air and air ventilation. The current practice in an institutional building cooling system under subtropical climate is to curb the mould issue by overcooling large recirculation airflow to remove the moisture content from the air, which is considered as an expensive practice. The use of a solar desiccant cooling system to reduce moisture from the air and to improve indoor air quality is found to be economical, environmental friendly and readily achievable in the tropics. This technology is the future alternative to the conventional vapour compression cooling system to maintain human thermal comfort conditions and enhance indoor air quality. Solar desiccant cooling systems are also environmentally friendly and energy efficient. This paper presents review on a solar desiccant cooling system and its effect on indoor air quality. It first introduces the issue of air moisture, mould growth and indoor air quality and then the development and application of thermally activated desiccant cooling technologies
Determining Effective Parameters on CO Concentration in Tehran Air by Sensitivity Analysis based on Neural Network Prediction
One of the most toxic pollutant gases produced by fossil fuels is carbon monoxide. Hence, the accurate and regular estimation and control of CO in the cities such as Tehran is inevitable. In this research, for the first time, CO concentration in ambient air was predicted based on 12 important urban and meteorological parameters by neural network. Also, the sensitivity analysis of the factors that effect on the concentration of carbon monoxide in Tehran was investigated based on the pollutant concentration predictive model. In this research, the daily statistical data of Tehran metropolis over the course of five consecutive years from 12 factors affecting the amount of carbon monoxide in Tehran, such as population, density, precipitation, temperature, urban traffic, wind speed, gasoil consumption, moisture, air flow, effective vision and air pressure was used. Based on this database, the artificial neural network with the best possible algorithm had been trained to predict this contaminant and root mean square error of model was equal to 2.54. Then, sensitivity analysis was done to find the most effective factor on the concentration of carbon monoxide, urban density and air pressure. In order to control this hazardous contaminant in urban management, these parameters should be taken into account. Based on the result, by preventing the construction of high towers in Tehran, wind speed average will increase and increasing in wind speed (25%) caused to reducing in carbon monoxide concentration (about 12%). Also, prevention of urban density (25%) will cause to prevention of increasing CO concentration (about 10%)
Displacement Solution for a Static Vertical Rigid Movement of an Interior Circular Disc in a Transversely Isotropic Tri-Material Full-Space
This article is concerned with the determination of the static interaction of a vertically loaded rigid circular disc embedded at the interface of a horizontal layer sandwiched in between two different transversely isotropic half-spaces called as tri-material full-space. The axes of symmetry of different regions are assumed to be normal to the horizontal interfaces and parallel to the movement direction. With the use of a potential function method, and by implementing Hankel integral transforms in the radial direction, the government partial differential equation for the solely scalar potential function is transformed to an ordinary 4th order differential equation, and the mixed boundary conditions are transformed into a pair of integral equations called dual integral equations, which can be reduced to a Fredholm integral equation of the second kind, which is solved analytically. Then, the displacements and stresses are given in the form of improper line integrals, which is due to inverse Hankel integral transforms. It is shown that the present solutions are in exact agreement with the existing solutions for a homogeneous full-space with transversely isotropic material. To confirm the accuracy of the numerical evaluation of the integrals involved, the numerical results are compared with the solutions exists for the homogeneous full-space. Then, some different cases with different degrees of material anisotropy are compared to portray the effect of degree of anisotropy
A Review of Applicability of Banning (Hajre) in Jurisprudence from the Perspective of Forensic Medicine
The topic of ward is among the important topics in jurisprudence and Forensic Medicine. Banning literally means prohibiting. The term of prohibition means preventing someone from being involved in financial or non-financial affairs and is called being banned. A person is banned from all affairs such as an unlettered person or some of the affairs such as a dying person. Banning has two forms; it sometimes is in the interests of the one banned from and his/her rights and sometimes for the benefit and the right of others. The objective of this brief article is an evaluation of extent banning applicability in Forensic Medicine topics and its relation with concepts and logics of the Islamic law
Institutional smart buildings energy audit
Smart buildings and Fuzzy based control systems used in Buildings Management System (BMS), Building Energy Management Systems (BEMS) and Building Automation Systems (BAS) are a point of interests among researcher and stake holders of buildings’ developing sector due to its ability to save energy and reduce greenhouse gas emissions. Therefore this paper will review, investigates define and evaluates the use of fuzzy logic controllers in smart buildings under subtropical Australia’s subtropical regions. In addition the paper also will define the latest development, design and proposed controlling strategies used in institutional buildings. Furthermore this paper will highlight and discuss the conceptual basis of these technologies including Fuzzy, Neural and Hybrid add-on technologies, its capabilities and its limitation
Functions of fuzzy logic based controllers used in smart building
The main aim of this study is to support design and development processes of advanced fuzzy-logic-based controller for smart buildings e.g., heating, ventilation and air conditioning, heating, ventilation and air conditioning (HVAC) and indoor lighting control systems. Moreover, the proposed methodology can be used to assess systems energy and environmental performances, also compare energy usages of fuzzy control systems with the performances of conventional on/off and proportional integral derivative controller (PID). The main objective and purpose of using fuzzy-logic-based model and control is to precisely control indoor thermal comfort e.g., temperature, humidity, air quality, air velocity, thermal comfort, and energy balance. Moreover, this article present and highlight mathematical models of indoor temperature and humidity transfer matrix, uncertainties of users’ comfort preference set-points and a fuzzy algorithm
A pattern recognition methodology for analyzing residential customers load data and targeting demand response applications
© 2019 Elsevier B.V. The availability of smart meter data allows defining innovative applications such as demand response (DR) programs for households. However, the dimensionality of data imposes challenges for the data mining of load patterns. In addition, the inherent variability of residential consumption patterns is a major problem for deciding on the characteristic consumption patterns and implementing proper DR settlements. In this regard, this paper utilizes a data size reduction and clustering methodology to analyze residential consumption behavior. Firstly, the distinctive time periods of household activity during the day are identified. Then, using these time periods, a modified symbolic aggregate approximation (SAX) technique is utilized to transform the load patterns into symbolic representations. In the next step, by applying a clustering method, the major consumption patterns are extracted and analyzed. Finally, the customers are ranked based on their stability over time. The proposed approach is applied on a large dataset of residential customers’ smart meter data and can achieve three main goals: 1) it reduces the dimensionality of data by utilizing the data size reduction, 2) it alleviates the problems associated with the clustering of residential customers, 3) its results are in accordance with the needs of systems operators or demand response aggregators and can be used for demand response targeting. The paper also provides a thorough analysis of different aspects of residential electricity consumption and various approaches to the clustering of households which can inform industry and research activity to optimize smart meter operational use
Development of an Acoustic Metamaterials for Aero Acoustic Noise Control
This paper aims at proposing a novel type tunable acoustic metamaterials with complete band gap composed of piezoelectric rods (Lithium Niobate) with square array as inclusion embedded polyimide aerogel background. The plane wave expansion method and the principles of Bloch-Floquet method used to get a band frequency and study the pass band for noise control. The results of this paper provide the required guidance for designing tunable wave filters or wave guide which might be useful in high-precision mechanical systems operated in certain frequency ranges, and switches made of piezoelectric; they also propose a novel type of tunable mechanical meta composite, where is independent of wave direction and has an equal sensitivity in all directions in which reacts omnidirectional and improves the aero acoustic noise control (e.g. bladeless fans) as well as general performance of vibrating structures (e.g. wind turbine)
Hybrid power plant bidding strategy including a commercial compressed air energy storage aggregator and a wind power producer
© 2017 IEEE. In this paper, a commercial compressed air energy storage (CAES) aggregator equipped with a simple cycle mode operation having the ability to work like a gas turbine is coordinated with a wind power aggregator (WPA) as a hybrid power plant to participate in electricity markets. In the proposed approach, the WPA uses the CAES to tackle its stochastic input and uncertainties related to different electricity market prices, and CAES can also use WPA to manage its charging/discharging and simple cycle modes more economically. A three-stage stochastic decision-making method is used to model the mentioned optimization problem which considers three electricity markets including day-ahead, intraday and balancing markets. The problem is formulated as a mixed integer linear programming which can be solved with available commercial solvers. Also, conditional value-at-risk is added to the problem to control the financial risk of the problem and offer different operation strategies for different financials risk levels. The proposed method can provide both bidding quantity and bidding curves to be submitted to the electricity markets which is tested on a realistic case study based on a wind farm and electricity market located in Spain. The results confirm that the proposed method can provide extra profit in joint operation, have more flexibility and reduce the financial risks
- …