3,167 research outputs found
Impact of misalignments on the analysis of B decays
This note investigates the effects of a misaligned tracking system on the
analysis of B decays. Misalignment effects of both the vertex locator and the
inner and outer T-stations have been studied. -scaling effects of the vertex
locator are also considered. It is proven that misalignments of the order of
the detector single-hit resolutions have little or negligible effects on the
quality of the reconstruction and of the analysis of B decays. The studies were
performed with a sample of decays, but the impact of
misalignments on the performance of the pattern recognition algorithms and on
the primary vertex resolutions, assessed for the first time, are rather general
and not restricted to decays
Precision scans of the pixel cell response of double sided 3D pixel detectors to pion and x-ray beams
hree-dimensional (3D) silicon sensors offer potential advantages over standard planar sensors for radiation hardness in future high energy physics experiments and reduced charge-sharing for X-ray applications, but may introduce inefficiencies due to the columnar electrodes. These inefficiencies are probed by studying variations in response across a unit pixel cell in a 55μm pitch double-sided 3D pixel sensor bump bonded to TimePix and Medipix2 readout ASICs. Two complementary characterisation techniques are discussed: the first uses a custom built telescope and a 120GeV pion beam from the Super Proton Synchrotron (SPS) at CERN; the second employs a novel technique to illuminate the sensor with a micro-focused synchrotron X-ray beam at the Diamond Light Source, UK. For a pion beam incident perpendicular to the sensor plane an overall pixel efficiency of 93.0±0.5% is measured. After a 10o rotation of the device the effect of the columnar region becomes negligible and the overall efficiency rises to 99.8±0.5%. The double-sided 3D sensor shows significantly reduced charge sharing to neighbouring pixels compared to the planar device. The charge sharing results obtained from the X-ray beam study of the 3D sensor are shown to agree with a simple simulation in which charge diffusion is neglected. The devices tested are found to be compatible with having a region in which no charge is collected centred on the electrode columns and of radius 7.6±0.6μm. Charge collection above and below the columnar electrodes in the double-sided 3D sensor is observed
Performance of the LHCb Vertex Detector Alignment Algorithm determined with Beam Test Data
LHCb is the dedicated heavy flavour experiment at the Large Hadron Collider
at CERN. The partially assembled silicon vertex locator (VELO) of the LHCb
experiment has been tested in a beam test. The data from this beam test have
been used to determine the performance of the VELO alignment algorithm. The
relative alignment of the two silicon sensors in a module and the relative
alignment of the modules has been extracted. This alignment is shown to be
accurate at a level of approximately 2 micron and 0.1 mrad for translations and
rotations, respectively in the plane of the sensors. A single hit precision at
normal track incidence of about 10 micron is obtained for the sensors. The
alignment of the system is shown to be stable at better than the 10 micron
level under air to vacuum pressure changes and mechanical movements of the
assembled system.Comment: accepted for publication in NIM
Improved performance of the LHCb Outer Tracker in LHC Run 2
The LHCb Outer Tracker is a gaseous detector covering an area of with 12 double layers of straw tubes. The performance of the detector is
presented based on data of the LHC Run 2 running period from 2015 and 2016.
Occupancies and operational experience for data collected in , pPb and
PbPb collisions are described. An updated study of the ageing effects is
presented showing no signs of gain deterioration or other radiation damage
effects. In addition several improvements with respect to LHC Run 1 data taking
are introduced. A novel real-time calibration of the time-alignment of the
detector and the alignment of the single monolayers composing detector modules
are presented, improving the drift-time and position resolution of the detector
by 20\%. Finally, a potential use of the improved resolution for the timing of
charged tracks is described, showing the possibility to identify low-momentum
hadrons with their time-of-flight.Comment: 29 pages, 20 figures, minor changes to match the published versio
Averages of -hadron, -hadron, and -lepton properties as of summer 2014
This article reports world averages of measurements of -hadron,
-hadron, and -lepton properties obtained by the Heavy Flavor Averaging
Group (HFAG) using results available through summer 2014. For the averaging,
common input parameters used in the various analyses are adjusted (rescaled) to
common values, and known correlations are taken into account. The averages
include branching fractions, lifetimes, neutral meson mixing parameters,
violation parameters, parameters of semileptonic decays and CKM matrix
elements.Comment: 436 pages, many figures and tables. Online updates available at
http://www.slac.stanford.edu/xorg/hfag
Radiation damage in the LHCb vertex locator
The LHCb Vertex Locator (VELO) is a silicon strip detector designed to reconstruct charged particle trajectories and vertices produced at the LHCb interaction region. During the first two years of data collection, the 84 VELO sensors have been exposed to a range of fluences up to a maximum value of approximately 45 × 1012 1 MeV neutron equivalent (1 MeV neq). At the operational sensor temperature of approximately −7 °C, the average rate of sensor current increase is 18 μA per fb−1, in excellent agreement with predictions. The silicon effective bandgap has been determined using current versus temperature scan data after irradiation, with an average value of Eg = 1.16±0.03±0.04 eV obtained. The first observation of n+-on-n sensor type inversion at the LHC has been made, occurring at a fluence of around 15 × 1012 of 1 MeV neq. The only n+-on-p sensors in use at the LHC have also been studied. With an initial fluence of approximately 3 × 1012 1 MeV neq, a decrease in the Effective Depletion Voltage (EDV) of around 25 V is observed. Following this initial decrease, the EDV increases at a comparable rate to the type inverted n+-on-n type sensors, with rates of (1.43±0.16) × 10−12 V/ 1 MeV neq and (1.35±0.25) × 10−12 V/ 1 MeV neq measured for n+-on-p and n+-on-n type sensors, respectively. A reduction in the charge collection efficiency due to an unexpected effect involving the second metal layer readout lines is observed
ChPT tests at the NA48 and NA62 experiments at CERN
The NA48/2 Collaboration at CERN has accumulated unprecedented statistics of
rare kaon decays in the Ke4 modes: Ke4(+-) ()
and Ke4(00) () with nearly one percent
background contamination. The detailed study of form factors and branching
rates, based on these data, has been completed recently. The results brings new
inputs to low energy strong interactions description and tests of Chiral
Perturbation Theory (ChPT) and lattice QCD calculations. In particular, new
data support the ChPT prediction for a cusp in the invariant mass
spectrum at the two charged pions threshold for Ke4(00) decay. New final
results from an analysis of about 400 rare
decay candidates collected by the NA48/2 and NA62 experiments at CERN during
low intensity runs with minimum bias trigger configurations are presented. The
results include a model-independent decay rate measurement and fits to ChPT
description.Comment: XIIth International Conference on Heavy Quarks and Leptons 2014,
Mainz, German
Recent NA48/2 and NA62 results
The NA48/2 Collaboration at CERN has accumulated and analysed unprecedented
statistics of rare kaon decays in the modes: () and ()
with nearly one percent background contamination. It leads to the improved
measurement of branching fractions and detailed form factor studies. New final
results from the analysis of 381 rare decay
candidates collected by the NA48/2 and NA62 experiments at CERN are presented.
The results include a decay rate measurement and fits to Chiral Perturbation
Theory (ChPT) description.Comment: Prepared for the Proceedings of "Moriond QCD and High Energy
Interactions. March 22-29 2014." conferenc
Performance of the LHCb vertex locator
The Vertex Locator (VELO) is a silicon microstrip detector that surrounds the proton-proton interaction region in the LHCb experiment. The performance of the detector during the first years of its physics operation is reviewed. The system is operated in vacuum, uses a bi-phase CO2 cooling system, and the sensors are moved to 7 mm from the LHC beam for physics data taking. The performance and stability of these characteristic features of the detector are described, and details of the material budget are given. The calibration of the timing and the data processing algorithms that are implemented in FPGAs are described. The system performance is fully characterised. The sensors have a signal to noise ratio of approximately 20 and a best hit resolution of 4 μm is achieved at the optimal track angle. The typical detector occupancy for minimum bias events in standard operating conditions in 2011 is around 0.5%, and the detector has less than 1% of faulty strips. The proximity of the detector to the beam means that the inner regions of the n+-on-n sensors have undergone space-charge sign inversion due to radiation damage. The VELO performance parameters that drive the experiment's physics sensitivity are also given. The track finding efficiency of the VELO is typically above 98% and the modules have been aligned to a precision of 1 μm for translations in the plane transverse to the beam. A primary vertex resolution of 13 μm in the transverse plane and 71 μm along the beam axis is achieved for vertices with 25 tracks. An impact parameter resolution of less than 35 μm is achieved for particles with transverse momentum greater than 1 GeV/c
Application of vertex and mass constraints in track-based alignment
The software alignment of planar tracking detectors using samples of charged
particle trajectories may lead to global detector distortions that affect
vertex and momentum resolution. We present an alignment procedure that
constrains such distortions by making use of samples of decay vertices
reconstructed from two or more trajectories and putting constraints on their
invariant mass. We illustrate the method by using a sample of invariant-mass
constrained vertices from D^0 --> K^- pi^+ decays to remove a curvature bias in
the LHCb spectrometer.Comment: 18 pages, 6 figure
- …